Analysis of Dynamic Characteristics of Submarine Free Spanning Pipelines by Complex Damping Method

Considering the effect of the internal flowing fluid and the external marine environmental condition, the differential equation for the vortex-induced vibration (V1V) of the free spanning pipeline is derived and is discretized by the Hermit interpolation function. The free vibration equation with the damping term is solved by the complex damping method for the natural frequency, and then the effect of fluid damping on the natural frequency of the free spanning pipeline is analyzed.The results show that fluid damping has a significant influence on the damped natural frequency of the free spanning pipeline in the lock-in state, while it has little influence when the pipeline is out of the lock-in state. In the meantime,the change of the free span length has the same effect on the damped natural frequency and the undamped natural frequency.     

Geochemical characteristics of mineral air particles emitted inside a clay atomisation plant which introduces waste recycling processes

The objective of this work is to assess the concentrations of three factions of air particles (settable particles, TSP and PM10) and the levels of several toxic elements in a clay atomisation industry through aerosol sampling at several points inside an industrial plant. Mechanical activities, which produce diffuse emissions, are the main process of discharge of particles in both indoor and outdoor workplace environments in the atomisation plant. The levels of As, Cd, Pb, Zn, Ba and Ni increase in the zones with higher concentrations of particles and lower ventilation. The concentrations of As and F are not influenced by the recycling processes. The levels of Cd and Pb do not show great enrichment in air particles collected inside the atomisation plant although the content of both elements is associated with ceramic muck recycling. Finally, the content of B in waste water is mainly transferred in gaseous phase to the atmosphere during the process of drying by atomisation.     

青藏高原新生代两类超钾质岩石的成因——实验岩石学和地球化学约束

青藏高原分布有羌塘—囊谦—滇西和冈底斯两条新生代钾质-超钾质火山岩带。羌塘—囊谦—滇西超钾质岩浆活动的峰值时间为40～30Ma,主体岩石具有Ⅰ型超钾质岩的高MgO和低CaO、Al2O3含量特征;30～24Ma期间羌塘中、西部出现Ⅲ型钾质-超钾质岩浆活动,主体岩石以贫SiO2、高CaO、Al2O3和低MgO/CaO为特征。冈底斯新生代超钾质火山岩也显示I型超钾质岩的高MgO和低CaO、Al2O3含量特征,其形成时间为25～12Ma。综合超钾质岩石的实验资料,可知区内I型超钾质岩的源区以富硅、富钾流(熔)体交代形成的金云母方辉橄榄岩为主;Ⅲ型钾质-超钾质岩浆源区则以斜辉橄榄岩地幔为主。囊谦—滇西Ⅰ型超钾质岩带空间上严格受红河走滑构造带所控制,40～28Ma出现I型超钾质岩浆活动,16Ma转变为OIB型钾质火山岩。岩浆源区从岩石圈地幔向软流圈演变,暗示大型走滑断裂引起的岩石圈地幔减薄和软流圈上涌是导致交代岩石圈地幔金云母分解熔融产生区内I型超钾质岩浆的主控因素。羌塘中部35～34Ma有软流圈来源为主的钠质碱性玄武岩岩浆的喷发,30～24Ma转变为以岩石圈地幔为主要来源的Ⅲ型钾质-超钾质岩浆活动,岩浆源区从软流圈向岩石圈迁移,指示软流圈上涌伴随的富CO2流(熔)体活动是导致古交代岩石圈地幔升温熔融产生Ⅲ型钾质-超钾质岩浆的主控因素,软流圈上涌可能是俯冲板片断离或岩石圈地幔拆沉作用的结果。     

How much does an extreme rainfall event cost? Material damage and relationships between insurance,rainfall, land cover and urban flooding

This research aims to understand how insurance, rainfall, land cover and urban flooding are related and how these variables influenced the material damage in the Lisbon Metropolitan Area (LMA) during the 2000–2011 period. Correlation coefficients show strong relationships between built-up areas and claims (0.94) and payouts (0.88). Despite no significant relationships being found between rainfall and the amount of material damage per event, three likelihood levels of flooding were determined for hourly rainfall. Unlike the studied period, the number of claims and their spatial distribution during the 2008 extreme rainfall event were strongly dependent on rainfall. Flooding related to the old watercourses assumed greater importance during this extreme event, recovering a more natural/ancient hydrological behaviour. In the LMA, the greatest material damage was the result of high-magnitude/low-probability rainfall events. Lower magnitude events can trigger numerous claims in heavily built-up areas, but they are hardly capable of producing large material damage.     

Comparison of water-level,extensometric, DInSAR and simulation data for quantification of subsidence in Murcia City (SE Spain)

Subsidence due to groundwater overexploitation has been recognized in the metropolitan area of Murcia (25 km²) in south-eastern Spain since the early 1990s. Previous published works have focused their attention on land subsidence that occurred during the drought period between 1995 and 2008. This work first analyzes the groundwater recovery that has occurred since 2008 and then determines the kind of associated ground deformation detected by the new extensometric data. Subsequently, subsidence time series are computed on 24 geotechnical boreholes scattered throughout the study area by means of a hydro-mechanical finite element code and a linear-elastic constitutive law. A spatio-temporal interpolation of the numerically modeled surface displacements is performed over the whole domain and compared with extensometers and DInSAR-derived displacement maps in two different periods: the drought period from 2004 to 2008, and the recovery period from 2008 to 2012. In spite of the limited information on the geomechanical parameters characterizing the modelled geological formations, the proposed approach is able to discriminate areas where the soils have an elastic behavior (small differences in the comparisons) or an elasto-plastic behavior (large differences in the comparisons). This zonation enhances the understanding of the subsidence phenomenon in Murcia City and could prevent, from a quantitatively point of view, future severe subsidence due to aquifer overexploitation.     

大气模式设计中的两个问题

本文就大气模式设计中的两个问题:分辨率的确定和非绝热加热、耗散之间的虚假的不平衡的处理进行了讨论。还推导了决定水平和垂直分辨率的公式以及调整非绝热和耗散使其达到准平衡的办法。     

中国大陆及华北地区地震资料的小波分析

基于地震活动为多尺度多活动这一观点，运用小波变换方法，以不同的小波尺度分析了中国大陆1900～2001年和华北地区1500～2001年M≥5地震的本尼奥夫应变资料，得到了各种层次地震活跃期和平静期，分析结果可信而又符合实际。对历史地震研究和地震危险性预测具有一定的参考价值。     

临沂市国土资源行政许可审批系统的设计与实现

临沂市加强信息化建设力度,按照统一标准建立国土资源基础数据库,实现全市国土资源行政许可审批数字化,实现全市国土资源行政许可网上联合审批、批项目备案管理、数据共享。该文论述了临沂市国土资源行政许可审批系统的总体框架和功能设计,详细介绍了该系统的项目申报管理、项目进度管理、督查督办等功能。系统实现了市局和县(区)局统一网上办公,实现了行政审批电子化、业务信息化、监管网络化管理。     

Design principle for parameters and interferences of tungsten carbide insert interface on roller bits

The lifetime of roll-bits with inserted tooth will be obviously decreased while drilling in strata and the tungsten carbide can be integrally separated from the roll-cone,which will need more trip out time to replace the roller bit.This study provides an entire analysis on stress as well as strength for teeth and tooth holes in loaded conditions.Qualities of tooth drop from matrix within roller bit.The optimized interferences of teeth inserted into the bit can be reasonably obtained by the critical interference derived from some relevant influence factors on the tooth-fixing quality of roller bits.