西准包古图呼的合铜矿地质特征、成因及成矿规律研究

新疆西准包古图矿区呼的合铜矿位于巴尔喀什华力西期斑岩成矿带.大地构造位置属哈萨克斯坦-准噶尔板块,唐巴勒-卡拉麦里古生代复合沟孤带,包古图岛弧区.矿床处于达尔布特和克乌深大断裂间,次级NS向与NE向断裂交汇处.Ⅴ号岩体属深源、浅成中酸性复合相岩体.含矿岩石以中粗粒、斑状、似斑状结构的石英闪长岩、花岗闪长斑岩为主,次有花岗闪长岩、花岗斑岩、黑云母花岗闪长岩等,形成时间为320~300 Ma,岩石蚀变强烈,蚀变分带自岩体中心向外构成钾长石和粒状石英核-钾化带-绢英化带-青盤岩化带.金属矿物组合自岩体中心向外变化规律为:(黄铁矿-辉钼矿-黄铜矿)→(黄铁矿-黄铜矿-闪锌矿-辉钼矿)→(黄铁矿-黄铜矿-毒砂-Te-Bi-Ag-Au的矿物).有益元素主要为铜、钼、金、银等元素,矿石类型自岩体中心向外的变化规律为:Mo(Cu)→Cu(Mo)→Cu(Au)→Au.矿石构造为细粒浸染状和细脉浸染状.矿石品位低、矿化均匀,成矿物质主要来自与其共生的岩浆岩,属典型斑岩型铜矿.构造、岩石、蚀变、矿物、及成矿元素在空间、时间上变化规律较强,与矿化富集有密切联系.     

深圳花岗岩地区嵌岩桩入岩界面判断探讨

由于受裂隙发育和不均匀风化的影响,导致中等(微)风化基岩面起伏大,软弱夹层和球状孤石普遍存在,嵌岩桩入岩界面的准确判定成为关键,而目前尚未有统一的判定标准和方法。以深圳市花岗岩地区地层特点为背景,依托某高层建筑嵌岩桩工程实例,从勘察与施工角度对嵌岩桩入岩界面判断进行工程经验总结。结合低应变法与现场载荷试验,对承载力要求较高的单桩承载力效果进行了评价。根据试验结果分析,受检桩桩身完整性类别为Ⅰ类,单桩竖向抗压承载力检测值皆达到载荷试验要求最大荷载,满足设计要求。     

扬子西北缘碧口微地块南华系碎屑锆石物源示踪及其地质意义

扬子板块西北缘碧口微地块华严寺地区碧口群之上发育一套含砾沉积地层,其确切沉积时限对研究该区域的沉积—构造演化具有重要意义。本文对该套地层中的2件砂岩样品进行了碎屑锆石LA-ICP-MS U-Pb测年分析,结果显示,锆石晶型较好,无色透明,磨圆度较差,具典型岩浆生长振荡环带和韵律结构,Th/U比值为0.28～3.6,锆石U-Pb年龄介于706～2 489Ma之间。存在3个主要的年龄组：新元古代年龄组（706～951 Ma）,占92.9%,显著峰值为850 Ma和843 Ma;中元古代年龄组（1 017～1 080 Ma）,占2.6%;古元古代年龄组（1 628～2 489 Ma）,占4.5%。最小年龄组为706～715 Ma（峰值为711 Ma）,结合区域地质和研究资料,华严寺地区沉积地层时代应属于南华纪,沉积时限约为720～635 Ma,物源区主要包括扬子板块西北缘碧口微地块以及南东侧的后龙门山构造带和汉南—米仓山微地块。新元古代晚期碧口微地块及扬子板块西北缘后碰撞—裂解阶段,华严寺地区南华纪沉积为碧口微地块及邻区新元古代岩浆岩在边缘裂谷环境中快速堆积形成。     

Numerical analyses of uplift behavior of pile foundation for transmission line structure in frozen soil regions北大核心CSCD

Pile foundation is one of the most commonly used and suitable foundations to support transmission line structure, especially in seasonally frozen soil regions and permafrost regions. Axial compression is the controlling condition in the design of foundations for such structures as bridges and buildings, while uplift and overturning will control the design of transmission line structure foundations. This paper presents an extensive overview of previous studies including experimental (e. g., laboratory model test and full-scale field load test), analytical/theoretical (e. g., limit equilibrium and limit analysis based on plasticity)and numerical(e. g., finite difference and finite element methods). The review indicates that study on the uplift behavior of pile foundation in frozen soil is relatively limited, particularly in the case of combined effect of axial uplift and lateral loading. Interaction between pile and frozen soil and mechanism of load transfer along the pile shaft and around the pile tip still remain unclear. Therefore, this paper implements finite difference analysis within FLAC3D to investigate the behavior of pile foundation in frozen silty clay and gravelly sand under axial uplift behavior and the effect of ground condition and lateral loading on the uplift behavior. Because of the axisymmetric condition of the problem studied, only half of the model is simulated. The chosen domain of the medium is discretized into a set of quadrilateral elements and the pile is discretized by the cylinder element. The interaction between the soil and pile is considered according to interface elements. Mohr-Coulomb criterion is adopted to model the soil behavior (perfectly elastic-plastic), while the pile is simply considered as a rigid body. The soil parameters such as Young’s modulus, cohesion and internal friction angle used for numerical analyses are determined by laboratory tests and estimated according to the empirical correlations with in-situ tests. The present numerical modeling is verified with the results from field loading tests on pile foundations in Qinghai-Tibet ±550 kV transmission line project. On this basis, parametric studies are carried out to uncover the behavior of pile in frozen soil. It is observed that pullout is the dominant failure mechanism of pile and the uplift load-displacement curve clearly exhibits an asymptote, consisting of initially linear elastic, nonlinear transition, and finally linear regions. These results are consistent with the observations in a few previous studies. In addition, larger uplift capacity of pile foundation in freezing period and gravelly sand is gained (about 20%). Lateral loading increases the deflection and therefore, decreases the uplift capacity of pile foundation. For the convenience of using the results obtained in practice, the values of uplift factor for pile foundation in silty clay and gravelly sand are provided. Finally, it should be noted that the method used, and the results obtained in the current work could be useful for engineers and designers, at least providing them some qualitative evidence for pile design in seasonally frozen soil regions and permafrost regions. This is important and necessary to ensure the safety of construction in such regions. Meanwhile, numerical analyses in the current work can be a benchmark example for subsequent research studies. © 2022 Science Press (China).     

某海底沉管隧道风塔及下部结构抗震性能分析

为研究某海底隧道风塔及下部结构体系在塑性阶段的损伤破坏形态及特点,探讨在多重荷载作用下弹塑性静动力响应对结构的影响,建立了沉管隧道风塔及下部结构的大型三维有限元模型。采用基于能量原理的混凝土塑性及损伤本构模型,借助大型有限元软件ANSYS及ABAQUS分别对结构进行不同地震条件下的动力时程分析,对比分析振型、层间位移角及较为完整的塑性损伤破坏系数曲线。结果表明:不同设防地震下,结构整体性良好,振型及层间位移角满足规范要求;不同罕遇地震下,该结构的混凝土塑性拉压损伤最大时刻均发生在20 s,主要破坏区域在风塔与人防井及下部立柱的接触位置,且拉伸破坏系数明显高于压缩破坏。本文的研究成果可以为类似近海沉管隧道工程抗震设计提供一定的依据与指导。     

基于耐震时程法的进水塔结构抗震性能分析

进水塔结构作为水电站的进水建筑物,其抗震性能对水电站的安全运行有重要意义。以沙牌水电站的高耸独立进水塔结构为研究对象,应用3条耐震时程曲线对其进行抗震性能分析与评估,并将计算结果与天然地震动下的增量动力分析结果进行比较,对比分析进水塔塔顶位移、基底剪力及地震损伤历程。实例研究表明：耐震时程法可以较好地分析结构的抗震响应,与增量动力分析结果的均值相匹配。耐震时程法可以利用较少的时程分析得到不同动力强度作用下的结构响应,且计算结果精度好、效率高,为进水塔结构的抗震性能分析提供一种新的手段。     

EC细网格对黔南州温度预报的订正研究

该文采用EC细网格2 m温度预报场及国家站实况资料,通过滑动平均法、双权重滑动平均法、多项式拟合法以及最佳系数法对EC细网格2 m温度在黔南州的预报进行订正分析,结果显示:4种方法订正后最高气温7 d平均准确率分别提升了12.70%~17.84%,最低气温7 d平均准确率分别提升了1.14%~2.86%。对于高温预报,最佳系数法订正效果最优,其次是多项式拟合法,对于最低气温,前3 d采用滑动平均法订正效果最明显,第4 d开始则采用最佳系数法订正,订正效果更明显。4种订正方法均在7-9月效果最明显。黔南州西部及中部地区多项式拟合法订正效果更好,州东南部地区最佳系数法与滑动平均法订正效果更好,但在120 h时效后滑动平均法的订正效果明显下降,州北部地区最佳系数法订正效果更为明显。     

POS支持的机载三线阵CCD影像立体定位技术

以我国自行研制的机载三线阵CCD相机为例,对基于POS的三线阵影像定位的成像模型、内方位的几何标定、外方位元素的解算以及直接定位和区域网平差方法进行了理论与实验研究.实验结果表明,利用GPS/IMU数据与摄影测量观测值进行联合平差,可以有效地克服相机内、外方位元素的系统误差,提高定位精度.     

黔西南州一次冰雹天气过程分析

对黔西南州2004年3月17日发生的一次冰雹天气过程从环流背景,影响系统等几方面进行了分新。     

基于模糊集分析的土壤质量指标高光谱反演

通过对横山县84个土样350~2 500 nm波段的光谱曲线分析,进行土壤质量12项指标的光谱反演。为获得有效光谱反演指标,利用单相关分析方法计算土壤质量指标与光谱反射率的相关系数并绘制相关系数曲线,根据极大相关性选择最佳波段作为光谱反演指标;剔除异常样本后,利用模糊识别理论建立土壤质量指标反演模型,通过优化得到模型的最佳参数。土壤质量12项指标光谱反演模型的平均检验误差均小于15%,说明模型的精度较高。