Investigation on the hydrodynamic performance of an ultra deep turret-moored FLNG system

Hydrodynamic performance of an ultra deep turret-moored Floating Liquefied Natural Gas(FLNG) system is investigated.Hydrodynamic modeling of a turret-moored FLNG system,in consideration of the coupling effects of the vessel and its mooring lines,has been addressed in details.Based on the boundary element method,a 3-D panel model of the FLNG vessel and the related free water surface model are established,and the first-order and second-order mean-drift wave loads and other hydrodynamic coefficients are calculated.A systematic model test program consisting of the white noise wave test,offset test and irregular wave test combined with current and wind,etc.is performed to verify the numerical model.Owing to the depth limit of the water basin,the model test is carried out for the hydrodynamics of the FLNG coupled with only the truncated mooring system.The numerical simulation model features well the hydrodynamic performance of the FLNG system obtained from the model tests.The hydrodynamic characteristics presented in both the numerical simulations and the physical model tests would serve as the guidance for the ongoing project of FLNG system.     

AUTOCAD一种快速分层展点的方法

针对目前测绘软件所展点均在同一图层,对照草图内业编辑时,图面点位多时,不方便编辑。故提出利用二次开发语言编写程序,在展点时,按照代码分层,为地形图编绘提供便利。     

An Integrated Structural Strength Analysis Method for Spar Type Floating Wind Turbine

An integrated structural strength analysis method for a Spar type floating wind turbine is proposed in this paper, and technical issues related to turbine structure modeling and stress combination are also addressed. The NREL-5MW “Hywind” Spar type wind turbine is adopted as study object. Time-domain dynamic coupled simulations are performed by a fully-coupled aero-hydro-servo-elastic tool, FAST, on the purpose of obtaining the dynamic characteristics of the floating wind turbine, and determining parameters for design load cases of finite element calculation. Then design load cases are identified, and finite element analyses are performed for these design load cases. The structural stresses due to wave-induced loads and wind-induced loads are calculated, and then combined to assess the structural strength of the floating wind turbine. The feasibility of the proposed structural strength analysis method for floating wind turbines is then validated.     

基于比例边界有限元方法的拱坝子结构分区形式研究

比例边界有限元方法是一种半解析的数值计算方法,具有降维、网格灵活、严格模拟无限域和无需基本解等特点。比例边界有限元方法的基本理论是在整体坐标与局部坐标的比例边界转换基础之上建立的,相似中心的选取是否合理对分析计算具有重要的影响,导致在模拟拱坝这种不规则的空间壳体结构时,具有一定的局限性。采用子结构方法,将坝体分为若干满足相似性要求的区域可解决上述问题,以某拱坝为例给出了合理的坝体子结构分区形式,验证了子结构方法的精确性,为建立基于比例边界有限元方法的坝体-库水-地基系统的计算模型奠定了基础。     

张家口朱家洼钼矿床成矿流体特征及对成因指示

张家口朱家洼钼矿床是近年来华北地台北缘中段继内蒙古曹四夭特大型钼矿床之后发现的又一个规模可达大型的钼矿床。钼矿床主要呈半隐伏—隐伏状围绕分布于骆驼山岩体周边。本次对矿区2个钻孔中采集的11件富含辉钼矿的石英矿物,进行了包裹体岩相学、显微测温、包裹体气、液相成分及氢氧分析。结果显示:该矿床流体包裹体可分为4种类型:富液相包裹体、富气相包裹体、含子晶包裹体和富CO2三相包裹体。其中,富CO2三相包裹体分布较少,其余3种类型包裹体常见。含子矿物的包裹体均一温度、盐度分别在400℃和45%NaCl eqv左右;富液相包裹体均一温度平均值为277.43℃,盐度20%NaCl eqv左右;富气包裹体和富CO2包裹体均一温度分别为380℃和30℃;盐度较低,分别为6%NaCl eqv和2.04%NaCl eqv左右。气液相成分分析显示流体体系成分以H2O、Cl-、F-、Na+、K+离子为主,Ca2+,SO42-含量较低,特征离子比值暗示流体来源于岩浆流体。成矿流体总体上属于H2O-NaCl体系。氢氧同位素组成显示,成矿流体主要来源于岩浆水。沸腾作用是辉钼矿沉淀的主要机制。