Shear-wave polarizations on a curved wavefront at an isotropic free surface

Summary. We present polarization diagrams of the particle motions at the free surface of an isotropic half-space generated by incident shear waves from a local buried point source. The reflectivity technique is used to calculate synthetic seismograms from which the particle motions are plotted. The particle motions are examined over a range of epicentral distances in a uniform isotropic half-space for different source frequencies and polarization angles, and for different Poisson's ratios. The particle motions due to a curved wavefront possess different characteristics from those generated by plane wavefronts at corresponding incidence angles. A curved wavefront generates a local SP -phase: a P -headwave which propagates along the free surface, and arrives shortly before the direct S -wave. These two arrivals give rise to cruciform particle motions in the sagittal and horizontal planes, which could be misinterpreted as anisotropy-induced shear-wave splitting. An examination of the particle motion in the transverse plane, mutually orthogonal to the sagittal and horizontal planes, can be used to discriminate between isotropic and anisotropic interpretations. The amplitude of the SP -phase is enhanced when it propagates in a low-velocity surface layer overlying the source layer, and may then become the dominant phase on radial-component seismograms. The presence of even a single surface layer may introduce considerable complexity into the seismogram, and we examine the effects of layer thickness, velocity contrast, and source depth on the corresponding polarization diagrams. Reliable information on the source and propagation path characteristics of shear waves from a buried local point source can only be obtained from free-surface records if they are recorded within a very limited epicentral distance range.     

Magnetic susceptibility variations of the Edicaran cap carbonates in the Yangtze platform and their implications for paleoclimate

1 INTRODUCTION One of the most intriguing phenomena in the late Neoproterozoic (~750 to 543 Ma) is the globa occurrence of thin carbonates that directly overlie glacial deposits in almost every continent (Kennedy 1996; Hoffman et al., 1998; Hoffman and Schrag 2002; Brasier and Shields, 2000; James et al., 2001 Jiang et al., 2003; Nogueira et al., 2003). These “cap carbonates”, commonly several to tens of meters thick, have attracted enormous interests because o their unusually negati…     

首都圈地区现今断层活动的数学模拟及地震危险性讨论

以首都圈地区现今活动断层上近２０年的位移测量资料为依据，用二维线弹性有限元对该区断层的活动特征进行了拟合，并结合有关资料讨论了该区的地震危险性。结果表明：１９７７－１９８６年间该区主压应力优势方位与华北较一致，约为Ｎ４５°－８０°Ｅ；１９８６－１９９０年其主压应力方向向北偏转，约为Ｎ５°－６０°Ｅ；１９９０年至现在其主压应力又向东偏转，角度大于第一阶段，约为Ｎ８０°－９５°Ｅ。该区的张家口－延庆一带近期有发生中强震的可能；丰镇－阳高－大同地区和凉城－古营盘地区应力较高，也应引起注意。     

大气垂直折射与时序垂直角值的谱分析

本文介绍了对时序垂直角观测值进行谱分析的方法和所得到的结论。使以往对于大气折射影响及其变化规律的定性认识得以定量化。     

Application of stress release models to historical earthquakes from North China

Univariate and multivariate stress release models are fitted to historical earthquake data from North China. It is shown that a better fit is obtained by treating separately the Eastern part of the region, including the North China Plain and Bohai Sea, and the Western part of the region, including the Ordos Plateau and its Eastern boundary. Further improvement is obtained by fitting the large events (M7.6) and smaller events in the Western region by different stress release models. The comparisons are made by computing the likelihoods of the fitted models and discounting the number of parameters used by Akaike's AIC criterion. The models are used to develop long-term risk scenarios for the East and West regions.     

Flow directions in ash-flow tuffs: a comparison of geological and magnetic susceptibility measurements, Tshirege member (upper Bandelier Tuff), Valles caldera, New Mexico, USA

This study concludes that the elongation axis (K ₁) of the ellipsoid of anisotropic magnetic susceptibility (AMS) is a suitable proxy for flow axis in ashflow tuffs. 153 oriented samples (176 specimens) were studied from 18 sites in the 1.1 Ma Tshirege member of the Bandelier Tuff. These sites are distributed around the Valles caldera at distances of 5–25 km outside of the rim.K ₁ axes correlate well with postulated radial flow axes at 13 sites.K ₁ also agrees with measured geological flow indicators, mainly imbricated larger clasts, at 7 sites. At 2 of the 5 sites where significant disagreement is seen between theoretical radial flow directions and measuredK ₁ axes, theK ₁ axes correspond well with geological flow indicators, indicating that the divergence of flow from the predicted radial flow pattern is real. Two major topographic buttresses are suggested as the cause of flow divergence for the Tshirege ash flows: the San Pedro buttress northwest of the caldera, and the San Miguel buttress in the southeast. In situK ₁ axes plunge about 7° toward the source at two-thirds of the sites; therefore the plunge ofK ₁ is a plausible in situ indicator for thedirection of flow. Multiple flow zones in sections of several meters thickness indicate changes of flow direction that are both rapid and large during ash-flow emplacement. These observations raisre the question of how best to represent mean flow directions in ash-flow sheets: by eigenvector methods, by vector-sum methods, or by modes. A method for measuring imbrication of larger clasts using apparent dips in vertical joints is outlined. Imbrication, determined in this way at one-third of the sites, dips toward the source, i.e., up-flow. The minimum (K ₃) axis of the AMS ellipsoid correlates with the flow foliation rather than with the larger clast imbrication. The flow axes of ash flows correspond with theK ₁ axes, not with the declination ofK ₃ axes as suggested by some authors. Initial dip of the sampled ash flows is not large and does not affect the paleomagnetic remanence direction, which is reversed with a mean ofD=173.5°,I=-38.4°, ₉₅=3.4°N=18. This mean is not different at the 95% confidence level from that of earlier workers. The mean pole, at 098.0°E, 74.8°N,A ₉₅=3.3°,N=18, is about 15° far-sided relative to the expected time-averaged geomagnetic pole, suggesting a history of emplacement too short to adequately average secular variation.     

Distribution and fluxes of metals in the St. Lawrence River from the outflow of Lake Ontario to Québec City

Six anchor stations in the St. Lawrence River from the outflow of Lake Ontario to Quebec City, were occupied for ca. 24 hours in June 1987 during low flow conditions. Samples of water and suspended particulate matter were separated by continuous-flow centrifugation, and were collected every two hours.During this sampling period, fluxes of dissolved forms of zinc, copper and nickel increased in Lac St. François and downstream relative to the sum of the fluxes for the two upstream stations at the outflow of Lake Ontario. Increases in the flux of dissolved zinc and copper were pronounced below Montreal and above Lac St. Pierre. For particulate forms of metals, all five metals show that there are significant inputs in the section of the St. Lawrence River between Lac St. François and the station just above the entrance to Lac St. Pierre.The average concentrations of dissolved cadmium, lead, zinc, copper and nickel ranged from 7–23 ng/l; 9–35 ng/l; 0.434–0.939 g/l; 0.15–0.89 g/l and 0.58–1.12 g/l respectively.Regression analysis of the dissolved and particulate metal concentrations suggests that the concentration of dissolved cadmium, lead, zinc and nickel can be predicted from the regression equation and the determination of particulate metal concentration. This prediction appears to be independent of the suspended particulate matter concentration which varies from ca. 1 to 10 mg/l from the outflow of Lake Ontario to Québec City.     

On the practice of estimating fractal dimension

Coastlines epitomize deterministic fractals and fractal (Hausdorff-Besicovitch) dimensions; a divider [compass] method can be used to calculate fractal dimensions for these features. Noise models are used to develop another notion of fractals, a stochastic one. Spectral and variogram methods are used to estimate fractal dimensions for stochastic fractals. When estimating fractal dimension, the objective of the analysis must be consistent with the method chosen for fractal dimension calculation. Spectal and variogram methods yield fractal dimensions which indicate the similarity of the feature under study to noise (e.g., Brownian noise). A divider measurement method yields a fractal dimension which is a measure of complexity of shape.