矢量图形与影像图像一体化实现

本文在阐述影像金字塔相关理论（构建方法、影像切割等）的基础上,采用VC2005编程实现了在同一GIS系统中进行矢量数据和栅格数据叠加显示的功能模块。该模块可确定是否加载影像,并根据当前矢量图显示范围自动加载不同分辨率的影像图。     

A study on the reference frame consistency in recent Earth gravitational models

All gravity field functionals obtained from an Earth gravitational model (EGM) depend on the underlying terrestrial reference frame (TRF), with respect to which the EGM’s spherical harmonic coefficients refer to. In order to maintain a coherent framework for the comparison of current and future EGMs, it is thus important to investigate the consistency of their inherent TRFs, especially when their use is intended for high precision studies. Following the methodology described in an earlier paper by Kleusberg (1980), the similarity transformation parameters between the associated reference frames for several EGMs (including the most recent CHAMP/GRACE models at the time of writing this paper) are estimated in the present study. Specifically, the differences between the spherical harmonic coefficients for various pairs of EGMs are parameterized through a 3D-similarity spatial transformation model that relates their underlying TRFs. From the least-squares adjustment of such a parametric model, the origin, orientation and scale stability between the EGMs’ reference frames can be identified by estimating their corresponding translation, rotation and scale factor parameters. Various aspects of the estimation procedure and its results are highlighted in the paper, including data weighting schemes, the sensitivity of the results with respect to the selected harmonic spectral band, the correlation structure and precision level of the estimated transformation parameters, the effect of the estimated differences of the EGMs’ reference frames on their height anomaly signal, and the overall feasibility of Kleusberg’s formulae for the assessment of TRF inconsistencies among global geopotential models.     

Change detection in Sal forest in Dehradun Forest Division using remote sensing and geographical information system

The review of study site have revealed the change in vegetation cover of Sal Dense to Sal Medium and Sal Open in 6 forest Mosaics owing to biotic and abiotic conditions prevailing in the specific areas. Analysis carried out using thematic map derived from aerial photograph of 1976 and satellite data of IRS 1C LISS III False Colour Composite (FCC) of March 1999 revealed the cause for change in forest density classes. Deforestation, encroachment and agriculture have been identified as the underlying causes, which have affected some specific locations to a marked extent. There has been a progressive and remarkable change among vegetation classes from 1976 to 1999. It is evident from forest type and density map that Sal density has significantly reduced from Sal Dense 65.61 % in 1976 to Sal Dense 11.12% in the year 1999 followed by Sal Open 11.18 % and Sal Medium 18.24 %. The overall change has been estimated to be 42.11% of the total forested area.     

Estimation of recent glacial variations in baspa basin using remote sensing technique

The Himalayas has one of the largest concentrations of glaciers outside the Polar Regions. Various reports suggest that significant number of mountain glaciers is shrinking due to climatic variations. Monitoring of these glaciers is important to assess future availability of water resources in the Himalayan region. However, Himalayan glaciers are normally difficult to monitor due to the rugged, mountainous terrain. Therefore, images of Indian Remote Sensing Satellite were used to monitor glaciers in the Baspa basin. Investigations have shown the presence of 30 glaciers in the basin, with areal extent of 167 km2. Out of these, 19 glaciers, with areal extent of 140 km² were selected to estimate retreat. Investigation suggests that almost all glaciers are retreating in the study basin and overall 19% deglaciation has been observed from 1962 to 2001. In general, altitude distribution appears to have significant influence on glacial retreat. Glaciers located around 5000 m altitude range are showing 24% loss as compared to 14% by glaciers located in altitude range higher than 5400 m. In addition, mean altitude of glacier terminus is shifted upward by 88 m, i.e. from 4482 to 4570 m in last 39 years. The glacial volumes were estimated using regression relationship between area and depth. The investigations have suggested that 19.10 km³ of glacial water stored in the 19 glaciers in 1962, has been reduced to 14.71 km³ in 2001, respectively, an overall loss of 23 percent in a period between 1962 and 2001. These investigations suggest that all glaciers in the Baspa Basin are reducing and in long term, such reducing trend can create scarcity of water in the region.     

Artificial Neural Network (ANN) Based Inversion of Benthic Substrate Bottom Type and Bathymetry in Optically Shallow Waters - Initial Model Results

Ocean-colour remote sensing in optically shallow waters is influenced by contribution from the water column depth as well as by the substrate type. Therefore, it is required to include the contribution from the water column and substrate bottom type for bathymetry estimation. In this report we demonstrate the use of Artificial Neural Network (ANN) based approach to spectrally distinguish various benthic bottom types and estimate depth of substrate bottom simultaneously in optically shallow waters. We have used in-water radiative transfer simulation modeling to generate simulated top-of-the-water column reflectance the four major benthic bottom types viz. sea grass, coral sand, green algae and red algae using Hydrolight simulation model. The simulated remote sensing reflectance, for the four benthic bottom types having benthic bottom depth up to 30 m were generated for moderately clear waters. A multi-layer perceptron (MLP) type neural network was trained using the simulated data. ANN based approach was used for classification of the benthic bottom type and simultaneous inversion of bathymetry. Simulated data was inverted to yield benthic bottom type classification with an accuracy of ~98% for the four benthic substrate types and the substrate depth were estimated with an error of 0% for sea grass, 1% for coral sand and 1–3% for green and red algae up to 25 m, whereas for substrate bottom deeper than 25 m depth the classification errors increased by 2–5% for three substrate bottom types except sea grass bottom type. The initial results are promising which needs validation using the in-situ measured remote sensing reflectance spectra for implementing further on satellite data.     

Water Harvesting Structure Positioning by Using Geo-Visualization Concept and Prioritization of Mini-Watersheds Through Morphometric Analysis in the Lower Tapi Basin

Geo-visualization concept has been used for positioning water harvesting structures in Varekhadi watershed consisting of 26 mini watersheds, falling in Lower Tapi Basin (LTB), Surat district, Gujarat state. For prioritization of the mini watersheds, morphometric analysis was utilized by using the linear parameters such as bifurcation ratio (R_b), drainage density (D_d), stream frequency (F_u), texture ratio (T), length of overland flow (L_o) and the shape parameter such as form factor (R_f), shape factor (B_s), elongation ratio (R_e), compactness constant (C_c) and circularity ratio (R_c). The different prioritization ranks were assigned after evaluation of the compound factor. 3 Dimensional (3D) Elevation Model (DEM) from Shuttle Radar Topography Mission (SRTM) and DEM from topo contour were analyzed in ArcScene 9.1 and the fly tool was utilized for the Geo-visualization of Varekhadi mini watersheds as per the priority ranks. Combining this with soil map and slope map, the best feasibility of positioning check dams in mini-watershed no. 1, 5 and 24 has been proposed, after validation of the sites.     

A Hierarchical Hybrid SVM Method for Classification of Remotely Sensed Data

The focus of this work is on developing a new hierarchical hybrid Support Vector Machine (SVM) method to address the problems of classification of multi or hyper spectral remotely sensed images and provide a working technique that increases the classification accuracy while lowering the computational cost and complexity of the process. The paper presents issues in analyzing large multi/hyper spectral image data sets for dimensionality reduction, coping with intra pixel spectral variations, and selection of a flexible classifier with robust learning process. Experiments conducted revealed that a computationally cheap algorithm that uses Hamming distance between the pixel vectors of different bands to eliminate redundant bands was quite effective in helping reduce the dimensionality. The paper also presents the concept of extended mathematical morphological profiles for segregating the input pixel vectors into pure or mixed categories which will enable further computational cost reductions. The proposed method’s overall classification accuracy is tested with IRS data sets and the Airborne Visible Infrared Imaging Spectroradiometer Indian Pines hyperspectral benchmark data set and presented.     

Recent advances in accessibility research: Representation,methodology and applications

 In this article we examine recent advances in accessibility research and their implications for future studies. We base our discussion on three intersecting dimensions that are useful for evaluating the contribution of recent studies: representation, methodology and applications. Various examples are selected to show that research concerned with representation and methodological problem solving is often applied to issues of broad concern in policy and planning. It is, however, not clear that the simultaneous treatment of representation, methodological and application issues has ever been fully worked out. The questions raised in this article may serve as a foundation for addressing issues pertinent to accurate representation, improved model building, and more rigorous applications in accessibility research. Received: 9 December 2002 / Accepted: 10 February 2003     

PLL Tracking Performance in the Presence of Oscillator Phase Noise

The tracking performance of a Phase Lock Loop (PLL) is affected by the influence of several error sources. In addition to thermal noise and dynamic stress error, oscillator phase noise can cause significant phase jitter which degrades the tracking performance. Oscillator phase noise is usually caused by two different effects: Allan deviation phase noise is caused by frequency instabilities of the receiver's reference oscillator and the satellite's frequency standard. It can be termed as system-inherent phase noise and is relevant for both static and dynamic applications. “External” phase noise, however, is caused by vibration and is a major problem for dynamic applications. In the context of this paper, both types of phase noise will be modeled and the resulting integrals will be evaluated for PLLs up to the third order. Besides, phase jitter induced by thermal noise and signal dynamics will also be discussed, thus providing all necessary formulas for analyzing the performance of a phase lock loop in case of different forms of stress. Since the main focus is centered on the effects of oscillator phase noise, the overall PLL performance is graphically illustrated with and without consideration of oscillator phase noise. © 2002 Wiley Periodicals, Inc.