Ionic conductivity in gem-quality single-crystal alkali feldspar from the Eifel: temperature,orientation and composition dependence

We measured the ion conductivity of single-crystal alkali feldspar originating from two different locations in the Eifel/Germany, named Volkesfeld and Rockeskyller sanidine and having potassium site fractions \(C_\mathrm{K}\) of 0.83 and 0.71, respectively. The dc conductivities resulting from electrochemical impedance spectroscopy over the temperature range of 300–900 \(^{\circ }\hbox {C}\) show a weak composition dependence but pronounced differences between the b-direction [\(\perp (010)\)] and \(c^{*}\)-direction [\(\perp (001)\)] of the monoclinic feldspar structure. Conductivity activation energies obtained from the observed linear Arrhenius plots are close to 1.2 eV in all cases, which is closely similar to the activation energies of the \(^{22}\mathrm{Na}\) tracer diffusivity in the same crystals. Taking into account literature data on K tracer diffusion and diffusion correlation effects, the present results point to a predominance of the interstitialcy mechanism over the vacancy mechanism in mass and charge transport on the alkali sublattice in potassium-rich alkali feldspar.     

Adsorption of antimony(V) on kaolinite as a function of pH,ionic strength and humic acid

The present work investigated the adsorption and mobility (desorption) of Sb(V) on kaolinite using batch experiments. The adsorption of Sb(V) on kaolinite was studied as a function of contact time, pH, ionic strength, humic acid (HA), initial Sb(V) concentration and temperature. Kinetic studies suggest that the equilibrium is achieved within 24 h. The adsorption of Sb(V) was strongly affected by changes in I at low ionic strength and unaffected at high ionic strength. The adsorption is weakly dependent on the presence of humic acid, but is strongly dependent on pH. Within the range tested, the optimal pH for Sb(V) adsorption is 3.6, and close to 75% removal can be achieved. Desorption is dependent on the original suspension pH. The addition sequence of Sb(V)/HA do not influence the adsorption of Sb(V) on kaolinite. The adsorption data fit both the Freundlich and Langmuir isotherm. The thermodynamic parameters (ΔH ⁰, ΔS ⁰ and ΔG ⁰) were calculated from the temperature dependence, and the results suggest the endothermic and spontaneous nature of the process.     

Tin partition behavior and implications for the Furong tin ore formation associated with peralkaline intrusive granite in Hunan Province,China

Tin deposits are often closely associated with granitic intrusions. In this study, we analyzed tin partition coefficients between different fluids and melts (\({\text{D}}_{Sn}^{aq.fl./melt}\)) as well as various crystals and melts \({\text{D}}_{Sn}^{aq.fl./melt}\)(\({\text{D}}_{Sn}^{crystal/melt}\)) from the Furong tin deposit associated with the Qitianling A-type granite. Our experimental results indicate that tin partition behavior is affected by the chemical compositions of fluids, melts, and minerals. Tin is prone to partitioning into the residual magma in fractional crystallization or other differential magmatic processes if the magma originated from crustal sources with high alkali content, high volatile content, and low oxygen fugacity. Highly evolved residual peralkaline granitic magma enriched in tin can lead to tin mineralization in a later stage. Furthermore, the volatiles F and Cl in the magma play important roles in tin partitioning behavior. Low F contents in the melt phase and high Cl content in the aqueous fluid phase are favorable factors for tin partitioning in the aqueous fluid phase. High Cl content in the aqueous fluid catalyzes water–rock interaction and leads to the extraction of tin from tin-bearing minerals. All these findings support a hydrothermal origin for the tin deposits. In light of the geotectonic setting, petrochemical characteristics, and mineralizing physicochemical conditions of the Furong tin deposit, it is inferred that the ore-forming fluid of the Furong tin ore deposit could have derived from the Qitianling peralkaline intrusion.     

Selection of hazardous waste dumpsites based on parameters effecting soil adsorption capacity – a case study

A careful selection of waste dumpsites, particularly hazardous ones, is very important for sustainable water resources management. Several laboratory experiments were carried out on the field samples to study adsorption capacity using p-dichlorobenzene (a solvent used in various industrial processes) as the test contaminant. The effect of parameters such as organic matter, clay, and iron and aluminium oxides, which are known to influence the soil adsorption capacity, are studied in the present work. Several soil samples from the Patancheru Industrial Area (Hyderabad, India) were collected and characterized. Only three soils, which had a comparatively high percentage of organic matter, clay, iron and aluminium oxide contents were used for the adsorption studies. The results clearly indicated a decrease in the adsorption capacity of the soils by as much as 75% when organic matter was removed. The other parameters such as clay and iron and aluminium oxides also play an important role in adsorption (57 and 39.8% reduction respectively). It was observed that out of the selected factors organic matter in the soils has the maximum effect regarding the adsorption of p-dichlorobenzene. Since the selected soils contain comparatively more organic matter, clay and iron and aluminium oxides in the selected industrial area, these can be used as sites for dumping hazardous waste, which can be further treated by methods like bioremediation.     

碱金属离子及碱溶液对膨润土性能影响的研究进展

基于前人有关膨润土在碱性环境下的室内试验和数值模拟的研究结果 ,重点阐述了碱金属离子及碱溶液对膨润土矿物成分、微观结构、膨胀性和渗透性等方面的影响,讨论了温度、pH值与溶液浓度等对上述过程的影响。碱金属离子及碱性溶液不仅可交换膨润土中蒙脱石层间阳离子,而且可溶解膨润土中的蒙脱石,生成非膨胀性矿物,并随着温度和pH值升高,蒙脱石被溶解程度增加,从而导致了膨润土膨胀力减小,且随着温度、溶液浓度及pH值的增加,膨胀力削弱程度加强;同时,膨润土与碱金属离子及碱溶液接触时孔隙增多,进而渗透性增强,随着温度和溶液浓度增加,渗透性也明显增强。数值模拟可实现膨润土与碱性溶液长期接触时发生的矿物成分及渗透性变化的预测。高温、不同pH值的低碱性溶液及其耦合作用对膨润土的矿物化学成分、微观结构、膨胀力和渗透性的影响及机理研究应该是今后研究的重点。     

Observation of abnormal thermal and infrasound signals prior to the earthquakes: a study on Bonin Island earthquake M7.8 (May 30, 2015)

Scientists from all over the world try to incorporate multi-disciplinary precursors to forecast the earthquake on a short-term basis. The authors here have analyzed outgoing longwave radiations acquired from polar-orbiting National Oceanic and Atmospheric Adminstration (NOAA) satellites and long-period infrasound waves recorded by the ground observatories in China prior to the recent Bonin Islands, Japan region earthquake which occurred on May 30, 2015 with the magnitude of 7.8. The anomalous outgoing longwave radiation (OLR) was observed on May 15, 2015, and was recorded by “NOAA 18” satellite during its “night pass.” Similarly, an abnormal infrasound spike was recorded at the Beijing station on May 17, 2015. The delay in observing anomalous infrasound waves compared to the OLR anomaly is due to these low-frequency waves traveling at low speed with the velocity range of 10–15 m/s. From the analysis of the results, it can be inferred that there is a substantial relation between parameters like OLR and infrasound waves; hence, the authors conclude that it is possible to forecast the earthquake on a short-term basis with reasonable accuracy.     

Helium and argon isotope geochemistry of natural gases in China’s petroliferous basins

The age-accumulation effect of 40Ar in hydrocarbon source rocks was discussed in accordance with the decay law of radioactive elements. In terms of the mean values of 40Ar/36Ar, the old Sinian gas reservoirs (mean values of 40Ar/36Ar: 7009) were definitely distinguished from the Permian gas reservoirs (mean values of 40Ar/36Ar: 1017) in Weiyuan, Sichuan Province, and the gas source of the Permian gas reservoir (mean values of 40Ar/36Ar: 5222) in well Wei-7 with the Weiyuan structure is defined as the Sinian system. Based on the values of 40Ar/36Ar, the coal-type gases (The source rocks are of the C-P system; mean values of 40Ar/36Ar: 1125) are definitely distinguished from the oil-type gases (The source rocks are of the Tertiary system; mean values of 40Ar/36Ar: 590) in the Tertiary reservoirs of the Zhongyuan Oilfield. Besides, 40Ar/36Ar values also have a positive effect on the oil-source correlation of oil reservoirs in ancient hidden mountains. According to the crust-mantle interchange information reflected by 3He/4He values, petroliferous provinces in China can be divided into three major tectonic regions. (1) The eastern active region: The crust-mantle volatile matter exchanges actively, and the 3He/4He values are mainly around 10-6, partly around 10-7. (2) The central stable region: The 3He/4He values are all around 10-8. (3) The western sub-stable region: The 3He/4He values are mainly around 10-8, and around 10-7 on the edges of the basins. Helium contents of some gas wells in China’s eastern petroliferous region reach the industrial abundance (He≈0.05%–0.1%), the 3He/4He values reach 10-6, and the equivalent values for the mantle-source components in helium gas can reach 30%–50%. As viewed from this, a new type of crust-mantle composite helium resources has been proposed. Geneses of some CO2 gas reservoirs in the east of China and some issues concerning mantle-source methane were discussed in the light of the helium and carbon isotopes of CO2 and CH4 in natural gases. In the discussion on helium isotopic characteristics of inclusions in the reservoirs, it was discovered that the 3He/4He values are close to those in natural gases. That is to say, this phenomenon is related to regional tectonism. The 3He/4He, CO2/3He and CH4/3He data were used to discuss the tectonic activities of fault zones in a certain number of regions in China.     

Effects of natural attenuation processes on groundwater contamination caused by abandoned waste sites in Berlin

The aim of this research project is to identify, characterize and quantify natural attenuation (NA) processes in groundwater affected by emissions of abandoned waste disposal sites in Berlin-Kladow/Gatow, Germany. It is part of the funding priority called KORA established by the Federal Ministry for Education and Research (BMBF) to explore the extent to which NA can be used for remedial purposes for varied forms of soil and groundwater contamination. Information on the emission behaviour of individual parameters is generated on the basis of hydrogeochemical comparison of 20 years old and new data. Using groundwater-modelling and CFC-analysis, information on the transport and retention of pollutants in groundwater is compiled. The microbial colonization of contaminated aquifers is characterized by molecular biological methods [polymerase chain reaction (PCR) and denaturing gradient gel electrophoresis (DGGE)] to differentiate between contaminated and not contaminated zones.     

Chromium speciation in oxide-type compounds: application to minerals,gems, aqueous solutions and silicate glasses

Cr K-edge XANES spectra were obtained for a variety of Cr-bearing model compounds containing Cr(II), Cr(III), Cr(IV), Cr(V) and Cr(VI), in which the Cr-site symmetry is D4h, Oh and Td. The centroid position of the pre-edge feature is a better indicator of the Cr valence than the edge position. In Cr-rich oxides, higher-energy transitions must be excluded in order to refine a robust valence for Cr. The pre-edge for chromates is not unique and varies as a function of the CrO₄ ^2? moiety distortion, which is often related to Cr-polymerization (monochromate vs. dichromate). Both the analogy with the Mn K-pre-edge information and ab initio FEFF calculations of the pre-edge feature for Cr(III) and Cr(VI) confirm the experimental trends. This methodology is applied to the Cr K-edge pre-edge feature collected in gems (emerald, spinel and ruby), the layered minerals fuchsite and kämmererite, two Cr-bearing aqueous solutions and a set of sodo-calcic silicate glasses used for bottling sparkling white wine. In emerald and fuchsite, the Cr-site is differently distorted than its ruby or spinel counterpart. In a Cr(III)-bearing aqueous solution and sodo-calcic glass, no evidence for Cr(III) with Td and C3v symmetry is detected. However, minor amounts of chromate moieties (most likely monomeric) are detected in a glass synthesized in air. Preliminary spectra for the wine bottle glass suggest that only trace amounts of chromates might possibly be present in these glasses.     

An application of a new method in permafrost environment assessment of Muli mining area in Qinghai-Tibet Plateau,China

The permafrost environment in the Muli mining area, an opencast mining site in the Qinghai-Tibet Plateau, China, is now undergoing significant degradation because of the ongoing mining activities. The permafrost environment in this mining site had already been evaluated by previous study, in which analytic hierarchy process was applied. Although this method can roughly characterize the permafrost environment of this mining site, it has limitations by being easily affected by man-made factors. In view of this limitation, this study attempts to employ a new method, the catastrophe progression method, to estimate the current stage of the permafrost environment in this mining area. The results show that, by catastrophe progression method, currently the calculated indexes of the permafrost freezing–thawing disintegration, permafrost thermal stability, permafrost ecological fragility, and the permafrost environment are 0.43 (general situation), 0.77 (general situation), 0.71 (bad situation) and 0.83 (general situation), respectively. These values imply that the permafrost environment has been damaged by anthropologic activities to a certain degree and potentially may be further degenerated. However, at this degree, a new equilibrium stage of permafrost environment could be achieved if the current state of environmental degradation is stabilized and treatments are constructed against further damages.