Rock Mass Deformation Characteristics in High-Steep Slopes Influenced by Open-Pit to Underground Mining

In Daye Iron Mine, the open-pit mining has ended and the underground mining started in 2003. The present pit slopes are as high as 430 m and the slope angle is up to 43°. During the process of open-pit to underground mining, the high-steep pit slopes would be affected by both open-pit mining and underground mining, and its deformation characteristics would become more complex. So in this paper, the trinity method of numerical simulation, model experiment and field test was adopted to analyze the displacement and stress fields systematically. The results show that: (1) Prominent rebound deformation occurs near the slope foot, which is induced by the unloading in open-pit mining. When it is backfilled to 0 m level, the rebound deformation decreases, which indicate that backfilling mass can restrict the deformation and improve the slope stability; (2) Subsidence dominates the slope deformation in open-pit to underground mining and it increases with an increasing elevation of monitoring point; the maximum horizontal displacement occurs in the lower part of the slopes, because the backfilled part is squeezed by both the north slope and the south slope, and it has a lower elastic modulus than the previous orebody; (3) The stress and its variability near the slope foot are much larger than other places, indicating that the slope foot is most affected by stress redistribution and stress concentration may occur here; the stress at other stress monitoring points changes little, indicating that the influence of open-pit to underground mining is local; (4) The effect of underground mining on the deformation of the faults is not prominent; (5) Mining operations in near-ground part affect more on the variation of deformation and stress of pit slopes than that in deeper part.     

Modification of strain wedge method for lateral soil-pile interaction in sandEI北大核心CSCD

A modified strain wedge (SW) method for analyzing the behavior of laterally loaded single piles in sand is proposed. The modified model assumes that the lateral displacements of a pile behind the three-dimensional passive soil wedge are nonlinear, which makes the horizontal soil strain variable with depths instead of a constant value in the original strain wedge model, and also employs two different hyperbolic models, one for describing horizontal stress increment-strain behavior of soil in the wedge, and the other for describing the shear stress-displacement property at the interface between soil and pile shafts. An example is analyzed to demonstrate the effectiveness of the modified method, and a good agreement is obtained. Finally, the effects of modifications on the lateral bearing capacity of pile shafts are discussed. The results show that the problem of overestimating the lateral bearing capacity of piles with strain wedge method can be ameliorated by introducing the assumption of nonlinear lateral displacements of piles. It makes the SW method more convenient and effective in analyzing the behavior of laterally loaded piles by introducing the new relationships of horizontal stress increment-strain and shear stress-displacement.     

基于热储法的鲁西平原地热资源评价

鲁西平原地处山东省的西南部,热储层主要有新近系馆陶组、明化镇组,古近系东营组和奥陶系。通过野外勘察和室内分析结果,选取合理的计算参数,利用热储法等对鲁西平原地热资源进行了评价。结果表明鲁西平原地区地热资源量达1.735 5×1021J,折合标准煤5.923 3×1010t;可利用地热资源量达3.252×1020J,折合标准煤1.110×1010t;热储层百年地热水储存量为4.229×1011 m3,地热水允许开发量为4.229×1011 m3。     

基于层区带刻度区地质特点的资源评价方法适用性分析

针对新型的层区带刻度区进行资源评价方法的适应性研究是长庆四次资评一项重要内容。采用油藏规模序列法、油藏过程模型法、容积法和饱和探井法4种资源评价方法,对具不同成藏特点的刻度区进行了深入的方法适用性分析和参数研究。研究结果表明,过程类资源评价方法对低渗透、特低渗透连续性岩性油藏,在以储量提交单元作为统计单元进行油藏发现序列与规模序列模拟时,计算参数的合理性与计算结果认知度很难达到统一。而勘探程度类资源评价方法,在深入的地质分析基础上,选择合理适宜的关键参数,是可以求得较为可信的地质资源量。当然,评价者对评价对象的认识程度和对评价方法的掌握程度也影响着资源评价的结果。     

底水油层水平井产液剖面均衡性评价

胜利油田开采底水特征高含水油层的水平井数量多,其中油层向水平井非均衡供液现象普遍。为评价此类水平井产液剖面均衡性,量化其生产动态改善潜力,定义了产液剖面基尼系数GN,并结合现场案例介绍其计算方法,随后统计胜利油田60口样本井,分析GN对见水时间tRL和底水突破前累积产油量QRL的影响,最后据此对GN分级。计算和分析结果表明:GN可以整体表征实际非均衡产液剖面偏离理想均衡产液剖面的程度,通常取值0~1之间,数值越大,均衡性越差;划分GN0.1为产液剖面不均衡,其样本井数54口,占比90%,以理想均衡产液状态为基准,tRL和QRL分别至少有100%和69.5%的提升潜力。     

The effect of slight to minor biodegradation on C<Subscript>6</Subscript> to C<Subscript>7</Subscript> light hydrocarbons in crude oils: a case study from Dawanqi Oilfield in the Tarim Basin,NW China

Light hydrocarbons (LHs) are one of the main petroleum fractions in crude oils, and carry much information regarding the genetic origin and alteration of crude oils. But secondary alterations—especially biodegradation—have a significant effect on the composition of LHs in crude oils. Because most of the LHs affected in oils underwent only slight biodegradation (rank 1 on the biodegradation scale), the variation of LHs can be used to describe more the refined features of biodegradation. Here, 23 crude oils from the Dawanqi Oilfield in the Tarim Basin, NW China, eleven of which have been biodegraded to different extents, were analyzed in order to investigate the effect of slight to minor biodegradation on C₆–C₇ LHs. The study results showed that biodegradation resulted in the prior depletion of straight-chained alkanes, followed by branched alkanes. In slight and minor biodegraded oils, such biodegradation scale could not sufficiently affect C₆–C₇ cycloalkanes. For branched C₆–C₇ alkanes, generally, monomethylalkanes are biodegraded earlier than dimethylalkanes and trimethylalkanes, which indicates that branched alkanes are more resistant to biodegradation, with the increase of substituted methyl groups on parent rings. The degree of alkylation is one of the primary controlling factors on the biodegradation of C₆–C₇ LHs. There is a particular case: although 2,2,3-trimethylbutane has a relative higher alkylation degree, 2,2-dimethylpentane is more resistant to biodegradation than 2,2,3-trimethylbutane. 2,2-Dimethylpentane is the most resistant to biodegradation in branched C₆–C₇ alkanes. Furthermore, the 2-methylpentane/3-methylpentane and 2-methylhexane/3-methylhexane ratios decreased steadily with increasing biodegradation, which implies that isomers of bilateral methyl groups are more prone to bacterial attack relative to mid-chain isomers. The position of the alkyls on the carbon skeleton is also one of the critical factors controlling the rate of biodegradation. With increasing biodegradation, Mango’s LH parameters K1 values decrease and K2 values increase, the values of n-heptane and isoheptane decrease, and the indices of methylcyclohexane and cyclohexane increase. LH parameters should be applied cautiously for the biodegraded oils. Because biodegraded samples belong to slight or minor biodegraded oils, the values of n-heptane and isoheptane from Dawanqi Oilfield can better reflect and determine the “Biodegraded” zone. When the heptane value is 0–21 and the isoheptane value is 0–2.6, the crude oil in Dawanqi Oilfield is defined as the “Biodegraded” zone.     

Review of Earth Critical Zone Research

Since the Earth Critical Zone put forward by National Research Council of America in 2001, it has got a lot of attention and some significant progresses have been made. This paper summarized those Earth Critical Zone projects and related research plans organized and implemented by the United States of America, Germany, Australia, France, China and the European Union, as well as main scientific problems and future development direction in the study of Earth Critical Zone. According to research status of China, the four main research contents should be strengthened including structure, formation and evolution mechanism of Earth Critical Zone, the coulpling interaction mechanism between migration and transformation of material and multi-processes, sevice function and evolution features of Earth Critical Zone and its support and effect on sustainable development, model simulation of process and system of Earth Critical Zone. In addition, our country should actively conduct cooperation and communication with the advanced countries, and enhance our involvement in international key research plans.     

Study on the Global Carbon Assimilation System Based on Multisource Remote Sensing Data

The Paris agreement signed in April, 2016 aims to balance global anthropogenic carbon emissions and terrestrial carbon sinks by the middle of the 21^st century. To fulfill this goal, it is necessary to calculate carbon fluxes of different regions reliably. The global carbon assimilation system is an effective technique for achieving this goal. The Ministry of Science and Technology of China supports the project entitled as study on the global carbon assimilation system based on multisource remote sensing data through the national key research and development programs for global change and adaptation during the thirteen-five period. This project will develop synergic inversion techniques for retrieving key parameters of biological and atmospheric cycles and for assimilating multisource remote sensing and ground based data. Then, the high resolution global carbon assimilation system coupled with an ecological model will be constructed. This system is able to assimilate jointly multisource observation data and to optimize key model parameters, photosynthesis and respiration carbon fluxes of global terrestrial ecosystems, and anthropogenic carbon emission fluxes of key regions. This system will be used to study quantitatively the spatial and temporal patterns of carbon fluxes of global terrestrial ecosystems and anthropogenic carbon emission fluxes of key regions and to identify the mechanisms driving the global terrestrial carbon sinks and sources. The outputs of this study will be helpful for the fulfillment of the key research and development programs for global change and adaptation and provide valuable data and technical support for the decision-making in China.     

Characteristic and Geological Significance of Microbially Induced Sedimentary Structures(MISS) in Terrestrial P-T Boundary in Xingyang,Western He’nan Province

Microbially Induced Sedimentary Structures (MISS) are primary sedimentary structures that arise syndepositionally from microbial community activity. Especially valuable are MISS for the analysis of early Archean (and extraterrestrial) deposits. However, most reports of MISS have focused on the Precambrian and Phanerozoic mass extinction marine sediments, and only a few and terrestrial MISS have been studied. The MISS presented in this paper, which mainly consists of mat growth feature, mat destruction feature and mat decay feature, are well preserved in terrestrial clastic rocks around the P-T boundary in Xiyang area, western Henan. Large U ridges, oriented sand quartz, mica grains and thin clayey laminae arranged parallel to bedding plane are the main features visible under the microscope. Several lines of evidence indicate that the Xingyang MISS are of biogenic origin. Abundant MISS in Xingyang may indicate the degradation of terrestrial ecosystems and proliferation of microbial mats immediately after the severe Permian-Triassic mass extinction. Study aiming at MISS helps to analyze their space distribution in the globe and to probe into links between microbial proliferation and environmental stresses following the end-Permian mass extinction in terrestrial ecosystems.