Traction image method for irregular free surface boundaries in finite difference seismic wave simulation

In this study, we propose a new numerical method, named as Traction Image method, to accurately and efficiently implement the traction-free boundary conditions in finite difference simulation in the presence of surface topography. In this algorithm, the computational domain is discretized by boundary-conforming grids, in which the irregular surface is transformed into a 'flat' surface in computational space. Thus, the artefact of staircase approximation to arbitrarily irregular surface can be avoided. Such boundary-conforming gridding is equivalent to a curvilinear coordinate system, in which the first-order partial differential velocity-stress equations are numerically updated by an optimized high-order non-staggered finite difference scheme, that is, DRP/opt MacCormack scheme. To satisfy the free surface boundary conditions, we extend the Stress Image method for planar surface to Traction Image method for arbitrarily irregular surface by antisymmetrically setting the values of normal traction on the grid points above the free surface. This Traction Image method can be efficiently implemented. To validate this new method, we perform numerical tests to several complex models by comparing our results with those computed by other independent accurate methods. Although some of the testing examples have extremely sloped topography, all tested results show an excellent agreement between our results and those from the reference solutions, confirming the validity of our method for modelling seismic waves in the heterogeneous media with arbitrary shape topography. Numerical tests also demonstrate the efficiency of this method. We find about 10 grid points per shortest wavelength is enough to maintain the global accuracy of the simulation. Although the current study is for 2-D P-SV problem, it can be easily extended to 3-D problem.     

Vertical distribution and water solubility of phosphorus and heavy metals in sediments of the St. Lucie Estuary, South Florida, USA

Accumulation and distribution of heavy metals and phosphorus in sediments impact water quality. There has been an increasing concern regarding fish health in the St. Lucie Estuary, which is related to increased inputs of nutrients and metals in recent decades. To investigate vertical changes of contaminants (P, Cd, Cr, Co, Cu, Ni, Pb, Zn, and Mn) in sediments of the St. Lucie Estuary in South Florida, 117 layer samples from six of the 210 to 420 cm depth cores were analyzed for their total and water-soluble P and heavy metals, clay, total Fe, Al, K, Ca, Mg, Na, and pH. Principal component analysis (PCA) was used in two sets of analytical data (total and water-soluble contaminant concentrations) to document changes of contaminants in each core of sediments. The PCA of total contaminants and minerals resulted in two factors (principal components). The first and second factors accounted for 61.7 and 17.2 % of the total variation in all variables, and contrast indicators associated with contaminants of P, Cd, Co, Cr, Ni, Pb, Zn, and Mn and accumulation of Fe and Al oxides, respectively. The first factor could be used for overall assessment of P and heavy metal contamination, and was higher in the upper 45–90 cm than the lower depths of each core. The concentrations of P and heavy metals in the surface layers of sediments significantly increased, as compared with those in the sediments deeper than 45–90 cm. The PCA of water-soluble contaminants developed two factors. The second factor (Cu–P) was higher in the upper than the lower depths of the sediment, whereas the highest score of the first factor (Cd–Co–Cr–Ni–Pb–Zn–Mn) occurred below 100 cm. The water-soluble Cu and P concentrations were mainly dependent on their total concentrations in the sediments, whereas the water-soluble Cd, Co, Cr, Ni, Pb, Zn, and Mn concentrations were mainly controlled by pH.     

吉林伊通盆地莫里青断陷古近系双阳组储集层成岩作用研究

古近系双阳组是在吉林省伊通盆地莫里青断陷中，油气赋存的主要层位,储层主要为湖底扇和扇三角洲的砂体。依据双阳组储层的大量薄片、扫描电镜、粘土矿物分析的资料研究了该储集层的成岩作用。研究结果表明双阳组储集层：成岩作用经历了压实、压溶、胶结、交代和溶解6方面的作用。双储集层中的自生粘土矿物蒙皂石向伊利石转化具有明显的特征：主要演化过程经历了蒙皂石渐变带，第一迅速转化带和第二迅速转化带，相应的成岩作用阶段可划分为早成岩阶段B期、晚成岩阶段A1期和晚成岩阶段A2期。依据在垂向上的成岩变化,建立了莫里青断陷双阳组储集层的成岩作用演化序列。在垂向上成岩作用的类型和强度均存在明显的差异，造成了储层物性的垂向分带。     

小型水电站建设用地地质灾害评估技术研究——以湄尼多河小型水电站为例

现阶段,地质灾害评估技术人员在评估实践中,往往不注重各评估对象的差异性,采取同一评估模式,结果达不到评估的目的。在对小型水电站进行评估时,野外调查的重点,评估过程中所使用的方法以及危险性现状、预测及综合分区评估等与大型水电站、路线工程、矿山开采、民用建筑等工程有所不同。湄尼多河小型水电站工程位于云南省怒江州福贡县马吉乡境内,地质环境条件复杂,评估级别综合为二级。文章以该电站建设用地地质灾害危险性评估为例,对小型水电站建设用地地质灾害危险性评估的方法与理论进行探讨。     

遥感技术在煤炭地质中的应用现状及前景

介绍了遥感技术在煤炭资源调查和评价、煤矿区地质灾害调查和评估、生态环境及污染调查评价和监测以及煤矿三维可视化仿真规划系统建设方面的应用研究现状及所取得的主要成果，并结合遥感技术的发展方向，展望了其在煤炭地质中的应用前景。     

油页岩综合利用对周围环境的影响——以抚顺矿区为例

世界能源日益减少的局面为油页岩的开发应用带来广阔的前景，但油页岩工业所带来的环境影响亦不容忽视。以抚顺油页岩为例，从油页岩综合利用和油页岩工业对环境的影响等方面系统讨论了在我国发展油页岩工业时，如何本着节约能源、保护环境、实现可持续发展的观念，利用现有先进技术，科学发展油页岩工业，降低生产过程中的固、液、气污染物对环境的危害。     

基于微电子系统（MEMS）加速度地震勘探三分量数字检波器简介

基于微电子机械系统（MEMS）制成的微加速度三分量数字地震检波器。集数据采集、处理及传输功能干一体，在结构模型、工作原理、性能指标控制等方面不同于常规检波器，其信号幅值在低于自然频率范围内没有衰减。因其独特的制造技术，MEMS检波器具有超低噪声，大动态范围和极高的向量保真度性能。     

邢台矿区山字型构造的发现及其地质意义

邢台山字型构造位于河北省邯邢煤田内，其前弧向ES突出，脊柱呈ES-WN走向。分别分析了山字型构造脊柱及其东、西翼反射弧构造形迹特征，对研究区找矿具有重要意义。