LiDAR数据提取等高线的方法研究

介绍LiDAR系统的特点,以及用高精度LiDAR数据提取等高线的方法,并在生产中通过大面积提取等高线进行验证。     

Virtual geographic environment-based integrated rockfall risk simulation method for canyon bridges

Bridges located in mountainous areas are vulnerable to rockfall accidents, posing a threat to bridge engineering construction and operation safety in these regions. Under the coupling effect of complex environments and engineering disturbances, integrated rockfall risk simulation has become increasingly important for canyon bridge structural protection in long-term construction and operation phases. One of the main scientific challenges in rockfall risk simulation is studying the interaction between rockfalls and the topography and engineering environments during consecutive contacts. To systematically simulate the integrated bridge rockfall risk, an integrated construction of multivariable elements coupled with rockfall risk environments and scenarios is required. In this article, we proposed a VGE-based integrated rockfall scenario simulation method that uses the “associated representation—integrated modelling—interactional simulation” core strategy. Our method constructs a virtual rockfall risk environment by fusing multisource data to represent rockfall factors that induce rockfall disasters, hazard-forming environments, and elements at risk. We design rockfall scenarios under different bridge engineering construction conditions and extreme environmental conditions to analyze the interactional rockfall risks. The results demonstrate that our method enables a systematic analysis of the potential integrated rockfall risk, providing realistic reference value for the timely and effective disposal of emergencies, and reducing the harm and losses caused by such emergencies.     

EVKG: An interlinked and interoperable electric vehicle knowledge graph for smart transportation system

Over the past decade, the electric vehicle (EV) industry has experienced unprecedented growth and diversification, resulting in a complex ecosystem. To effectively manage this multifaceted field, we present an EV-centric knowledge graph (EVKG) as a comprehensive, cross-domain, extensible, and open geospatial knowledge management system. The EVKG encapsulates essential EV-related knowledge, including EV adoption, EV supply equipment, and electricity transmission network, to support decision-making related to EV technology development, infrastructure planning, and policy-making by providing timely and accurate information and analysis. To enrich and contextualize the EVKG, we integrate the developed EV-relevant ontology modules from existing well-known knowledge graphs and ontologies. This integration enables interoperability with other knowledge graphs in the Linked Data Open Cloud, enhancing the EVKG's value as a knowledge hub for EV decision-making. Using six competency questions, we demonstrate how the EVKG can be used to answer various types of EV-related questions, providing critical insights into the EV ecosystem. Our EVKG provides an efficient and effective approach for managing the complex and diverse EV industry. By consolidating critical EV-related knowledge into a single, easily accessible resource, the EVKG supports decision-makers in making informed choices about EV technology development, infrastructure planning, and policy-making. As a flexible and extensible platform, the EVKG is capable of accommodating a wide range of data sources, enabling it to evolve alongside the rapidly changing EV landscape.     

无锡市水利普查成果展示系统的设计与实现

全国第一次水利普查完成数据成果汇总后,成果展示及开发应用相即展开。无锡市水利局结合自身工作及管理需要,构建了完善且适合本地需要的水利空间成果库和属性库,以地理信息技术为支撑,实现了无锡市水利普查成果"一张图"展示。无锡市水利普查成果展示系统建设以水利管理部门需求为依托,分析各项管理工作对地理信息系统提出的功能需求,系统实现对无锡市河湖水系、水利设施等进行定位、搜索、属性信息存取与分析处理等。使水利普查成果成为动态服务地图,既方便使用者查看,也便于分析水利要素周围情况及合理性,同时为水利管理工作人员规划决策提供依据。本系统将无锡市水利普查成果应用到实际工作中,为无锡市水利信息化服务,使水利普查成果为民所用。     

Scale-oriented temporal analysis of movement data: A series-based approach

The ubiquity of movement data has led to new research interest in aspects of temporal scale. Few of the approaches analyzing movement data have been developed specifically for scale-oriented temporal analysis. To overcome this limitation, this article proposes a series-based approach to perform scale-oriented temporal analysis of movement data. Key to the proposed approach is the construction of four types of series (one type of identical-scale series and three types of cross-scale series) based on the continuous triangular model (CTM). Two distinct research goals are derived from this: to investigate the changes in motion attributes of moving individuals across different temporal scales, and to detect the time intervals during which active events might have occurred. The results based on real football movement data show that finer changes in motion attributes can be found and more accurate time intervals can be detected through the proposed approach.     

顾及用户体验的三维城市模型自适应组织方法

传统基于“图层付象”的组织方法,没有考虑三维城市模型的不同内容以及不同细节层次的粒度差异,导致在网络环境下的传输效率低,难以满足多用户并发访问的流畅可视化。深入分析了大范围漫游与小范围聚焦的用户体验特点,通过元数据统筹管理和对象离散化,即时响应用户请求,减少无效数据传输,保证了多用户并发环境下的高效调度和浏览。针对模型LoI)和分解的对象,设计了结构统一的对象ID,隐式存储关联关系并支持分布式模型存储管理。以分布式数据库MongoDB为平台进行实验,验证了本文方法的可行性和有效性。     

The determination of potential difference by the joint application of measured and synthetical gravity data: a case study in Hungary

In an elementary approach every geometrical height difference between the staff points of a levelling line should have a corresponding average g value for the determination of potential difference in the Earth’s gravity field. In practice this condition requires as many gravity data as the number of staff points if linear variation of g is assumed between them. Because of the expensive fieldwork, the necessary data should be supplied from different sources. This study proposes an alternative solution, which is proved at a test bed located in the Mecsek Mountains, Southwest Hungary, where a detailed gravity survey, as dense as the staff point density (~1 point/34 m), is available along a 4.3-km-long levelling line. In the first part of the paper the effect of point density of gravity data on the accuracy of potential difference is investigated. The average g value is simply derived from two neighbouring g measurements along the levelling line, which are incrementally decimated in the consecutive turns of processing. The results show that the error of the potential difference between the endpoints of the line exceeds 0.1 mm in terms of length unit if the sampling distance is greater than 2 km. Thereafter, a suitable method for the densification of the decimated g measurements is provided. It is based on forward gravity modelling utilising a high-resolution digital terrain model, the normal gravity and the complete Bouguer anomalies. The test shows that the error is only in the order of 10⁻³mm even if the sampling distance of g measurements is 4 km. As a component of the error sources of levelling, the ambiguity of the levelled height difference which is the Euclidean distance between the inclined equipotential surfaces is also investigated. Although its effect accumulated along the test line is almost zero, it reaches 0.15 mm in a 1-km-long intermediate section of the line.     

半参数模型统计诊断与粗差检验

This paper systematically studies the statistical diagnosis and hypothesis testing for the semiparametric linear regression model according to the theories and methods of the statistical diagnosis and hypothesis testing for parametric regression model.Several diagnostic measures and the methods for gross error testing are derived.Especially,the global and local influence analysis of the gross error on the parameter X and the nonparameter s are discussed in detail;at the same time,the paper proves that the d...     

Using gravity and topography-implied anomalies to assess data requirements for precise geoid computation

Many regions around the world require improved gravimetric data bases to support very accurate geoid modeling for the modernization of height systems using GPS. We present a simple yet effective method to assess gravity data requirements, particularly the necessary resolution, for a desired precision in geoid computation. The approach is based on simulating high-resolution gravimetry using a topography-correlated model that is adjusted to be consistent with an existing network of gravity data. Analysis of these adjusted, simulated data through Stokes’s integral indicates where existing gravity data must be supplemented by new surveys in order to achieve an acceptable level of omission error in the geoid undulation. The simulated model can equally be used to analyze commission error, as well as model error and data inconsistencies to a limited extent. The proposed method is applied to South Korea and shows clearly where existing gravity data are too scarce for precise geoid computation.     

A hierarchical model for estimating methane emission from wetlands using MODIS data and ARIMA modeling

A three-step hierarchical Semi Automated Empirical Methane Emission Model (SEMEM) has been used to estimate methane emission from wetlands and waterlogged areas in India using Moderate Resolution Imagine Spectroradiometer (MODIS) sensor data onboard Terra satellite. Wetland Surface Temperature (WST), methane emission fluxes and wetland extent have been incorporated as parameters in order to model the methane emission. Analysis of monthly MODIS data covering the whole of India from November 2004 to April 2006 was carried out and monthly methane emissions have been estimated. Interpolation techniques were adopted to fill the data gaps due to cloudy conditions during the monsoon period. AutoRegressive Integrated Moving Average (ARIMA) model has been fitted to estimate the emitted methane for the months of May 2006 to August 2006 using SPSS software.