珠江河口铜、铅、锌、铬和镉对单细胞藻类生长的影响

通过现场采水样和实验室模拟,研究珠江河口环境在一连串变化过程中,当各种浓度的Cu,zn,Pb,Cr和Cd单独存在或共存时,对单细胞藻类——硅藻和扁藻的毒性影响。     

气溶胶光学厚度的时空变化

在大气中气溶胶微粒是一种重要的大气微量成分。气溶胶光学厚度也是大气校正所需的重要大气参数，同时也是海洋水色卫星主要的数据产品。由于气溶胶光学厚度的时空变化较大，所以如何准确获取大气校正和卫星数据产品真实性检验所需的气溶胶光学厚度则是至关重要的。在简述气溶胶光学性质的基础上，并结合2002年6月HY—1南海实验数据来阐述现场气溶胶光学厚度的准确获取。     

九龙江流域水葫芦打捞去除水体营养盐模型研究

水葫芦被收获时,水体中的营养盐也将包含在植物组织中而被去除.本研究首先通过野外实验和参考国内外有关文献,建立了九龙江流域水葫芦生长数学模型和持续生产模型,确定了模型的各有关参数:水葫芦生长容量K值为25.6 kg/m2、最大生长速率rmax为0.12d-1;水体中氮和磷的半饱和系数hN和hP值分别为0.2和0.03;水葫芦最低生长温度(mθin)为7℃,最适水温(oθpt)为30℃,最高生长温度(θmax)为40℃.随后采用所建立的模型计算了研究区水葫芦打捞的营养盐去除效果,研究区面积6 000m2的水体实施水葫芦打捞策略后,1a所能收获的水葫芦最大产量为9.18×105kg,去除的TP为214.4kg,TN为966.6kg.     

近海海洋石油平台导管架喷涂金属层防腐

锌、铝及其合金涂层对钢铁的防护，不仅对阴极起保护作用(Gartland，1987)， 对涂层本身也具有良好的抗腐蚀性能。此外，涂层中金属微粒表面形成的致密氧化膜，也起到了防腐蚀的作用。在不同大气环境下，锌、铝有良好的耐蚀性，其腐蚀速率比钢铁要低得多(李言涛，1998)。采用热喷涂锌、铝及其合金涂层对钢铁构件和构筑物进行长效防护早在20世纪20年代就已开始应用，至今仍是普遍采用的防护措施，并在继续发展(李守本等，1989)。20年代初，法国首先用于海水闸门的防腐；40年代美国用于墨西哥湾的海上井架和海上输油管以及舰船的防腐；60年代英、法、德等国海军将这一技术扩大应用到舰船的上部结构和船壳。而金属热喷涂技术在海洋工程中使用非常有限，第一次使用热喷铝涂层防护近海平台的实例是Conoco公司在北海的Murchison结构上的锥形塔，并且已获得了4a良好的使用效能(Fisher et al.，1987；Shaw et al.，1985)。1984年6月，Hutton张力支柱平台(TLP)在北海下水(水深148 m)安装。系链、升降机和锥形塔均采用火焰热喷涂技术喷涂铝涂层进行防护(Tyson，1985)。1992年6月，Hotton平台使用8a后，对升降机绳索进行观察，在飞溅区没有发现腐蚀现象，也没有检测到褐色渗漏效应(Fisher et al.，1995)。     

陀螺经纬仪的读数方法比较研究

介绍了陀螺定向测量中三种不同的数据采集方法，分析了各种方法的优缺点。作者认为传感器采集数据自动化程度高，精度高，特别是运用位置敏感探测器（PSD）采样数据量大，具有一定的抗干扰能力，但在运用传感器采样时必须注意克服非线性误差。     

南极海冰与西北太平洋台风

本文利用最大熵谱分别计算了南极４个区海冰和西北太平洋台风发生频数的变化周期，并对前３年的南极海冰强弱和当年的台风发生频率数进行了逐月时间序列相关分析。     

Design of Mooring System for Oil Storage Vessels

The floating oil storage system has been proposed as a new facility for Strategic Petroleum Reserve (SPR) in China. Mooring is one of the key technologies to ensure the safety, reliability, and performance of the oil storage system. This paper describes the concept, analysis, design and reliability of the mooring system. For mooring system design of these oil vessels, analysis is essential of the behavior of the vessel in connection with mooring facilities of nonlinear resilience. A nonlinear mathematical model for analyzing a moored vessel is established and solved. Some results of numerical simulations are presented. Assessment of the safety regarding the mooring system in terms of failure probability is carried out. Another simulation model for calculating the failure probability of the mooring system is proposed. The design parameters that have an influence on the characteristics of the failure probability have been identified. The simulation results show that the mooring system has an annual reliab     

Experimental Investigation of Instantaneous Properties of Wave Slamming on the Plate

The purpose of this paper is to investigate the instantaneous properties of wave slamming on the plate structure of an open structure.The advanced instantaneous measuring technique-Particle Image Velocimetry(PIV) is applied to acquire the instantaneous velocity field of wave slamming.From the cross-correlation analysis results of the images captured by the CCD camera,the flow fields of wave impacting on the structure are displayed visually,and the instantaneous whole-field fluid velocity vectors are obtained.The relation between the instantaneous peak impacting pressures and the instantaneous velocities of water particles is studied by probability analysis.     

星载SAR浅海水下地形和水深测量模拟仿真──水下地形高度、坡度和方向与可测水深分析

根据星载合成孔径雷达(SAR)浅海水下地形和水深成像机理,建立了浅海水下地形和水深雷达后向散射截面仿真模型.利用该模型模拟并分析了不同地形条件下,浅海水下地形的雷达后向散射截面.分析结果表明,水下地形高度越高,SAR可测量的水深越深;水下地形坡度越大,越易被SAR所观测.水下地形的星载SAR测量还与水下地形的方向有关,与卫星飞行方向平行的水下地形最易被SAR观测,与卫星飞行方向垂直的水下地形最不易被SAR观测.     

TECTONIC FRAMEWORKS OF THE BOHAI GULF AND COASTAL, BASINS

The Bobai Gulf and its coastal basin is an important oil and gas province of China that covers an area of 200,000 sq. km.It is a polycylic superimposed basin. Its history of development can be subdivided into four stages: (i) Late Proterozoic parageosydine stage (Sinian); (ii) Early palaeozoic cratonic stage (Lower Cambrian-Middle Ordovician): (iii) Late palaeozoic intracratonic coal bearing sequences stage (Middle Carboniferous-Permian); (iv) Mesozoic and Cenozoic taphrogenic rifting and subsidence stages.During the Paieogene rifting stage, three NNE trough systems and three nearly E-W trough systems were initialed as the results of regional extensional stresses. Central rift valleys, low angle gravity faults and a series of asymmetrical half-grabens were developed surrounding the "Bohai Mantle Plume ". Th- riftitip troughs were egtended ard widened gradually. During the Neocene, a large saucer-shaped sedimentary basins was developed into a thick blanket covering the whole areas of either the Paleogene