基于COM/AutoCAD的SPOT5卫星影像地物半自动成图方法

对使用COM ActiveX自动控件接口操作AutoCAD进行介绍,针对利用SPOT5 HRS立体影像进行地物要素成图问题提出基于COM/AutoCAD的矢量化方法,并着重阐述利用该方法制作1∶50 000地形图的主要问题。     

基于GIS的案件预测建模与实现

在系列案件中,如果能预测案件发生的地点和时间,就可以合理安排警力,也可以采取富有针对性的案件侦破策略,提高刑事案件的侦破效率。探讨如何对这一问题进行数学建模,并基于ESR I公司的ArcEngine进行编程实现。     

Out-of-sequence thrusts and paleogeography of the Rhenodanubian Flysch Belt (Eastern Alps) revisited

The Oberstdorf nappe of the Western and the Laab nappe of the Eastern Rhenodanubian Flysch (ERF) were independently identified as out-of-sequence thrust units by facies studies (Mattern 1999) and zircon analyses (Trautwein et al. 2001a, b, c), respectively. A new look at both areas reveals mutual similarities and new evidence for the out-of-sequence concept. Paleocurrent and heavy mineral data make it possible to reconstruct the sediment influx directions. From the Barremian to the mid-Campanian, the western and eastern basin segments were fed with south-derived garnet and north-derived zircon/”ZTR” (i.e., zircon, tourmaline, and rutile). Because both out-of-sequence units are relatively rich in zircon/ZTR they must have occupied the northernmost basin position. In the Western Rhenodanubian Flysch segment, the Sigiswang nappe occupied the central and the Üntschen nappe the southernmost basin position. In the ERF segment the central basin is represented by the Greifenstein nappe and the southernmost basin by the Kahlenberg nappe. Both out-of-sequence units do not occur in the northernmost and tectonically lowest position in their respective nappe piles as they were thrust over the other nappes. The reconstructed basin positions of the thrust units are suggested by the observation of a gradient in heavy mineral content in the thrust units. This paleogeographic arrangement is least problematic and renders models with differently positioned thrust units, requiring debris-shedding intrabasinal ridges, as unnecessarily complicated. Instead, we suggest that gradual changes in heavy mineral composition existed in across-basin direction. Garnet may stem from the Central Gneiss Complex of the Tauern window and formerly exposed lateral equivalents, all representing the southern Mid-Penninic zone. We assign the Falknis/Tasna nappe and formerly exposed lateral equivalents to the northern Mid-Penninic zone which served as the zircon/ZTR source. Interpreting Ebbing’s (Ph.D. thesis, Freie Universität Berlin, pp 1-143, 2002; Fig. 6.10) density section, we suggest that Mid-Penninic crust exists beneath the Central Gneiss Complex. During the latest Cretaceous much garnet was also N-derived. This may reflect processes related to the consumption of the North Penninic basin.     

塔里木盆地巴楚地区中奥陶统一间房组露头礁滩复合体储层地质建模及其对塔中地区油气勘探的启示

通过1：5万礁滩复合体地质填图,在巴楚地区共发现大小不等的礁滩复合体90余个,层位为中奥陶统一间房组二段．台缘为礁滩复合体密集发育区,礁滩体规模大,台内为礁滩复合体零星发育区,礁滩体规模小。通过对6个典型礁滩复合体的解剖,研究了礁滩复合体的微相类型、组合和各微相的岩石特征、生物群落,并对其生长发育阶段进行了分析。根据6个典型礁滩复合体及礁间的大量铸体薄片鉴定和物性资料,分析了储层的特征、成因和非均质性,建立了台缘礁及礁间、台内礁及礁间2种背景条件下的储层地质模型。巴楚地区露头礁滩复合体储层地质模型对塔中地区上奥陶统良里塔格组礁滩复合体的勘探具有重要的指导意义,并为勘探实践所证实。     

滇西北兰坪地区金顶超大型铅锌矿床架崖山-北厂 矿段岩石地层特征

详细描述了滇西北兰坪金顶矿区架崖山-北厂主矿段露采剖面的岩石地层学特征。架崖山-北厂矿段出露正常沉积岩和非正常沉积岩两大岩石系列,分别由灰白色白云质灰岩、黑色泥晶灰岩、青灰色泥灰岩、杂色泥质粉砂岩、砖红色粉砂岩、红色膏溶角砾岩和浅灰色钙质砂岩、灰褐色灰岩角砾岩、杂色垮塌角砾岩组成。空间上以非正常沉积岩系列灰褐色灰岩角砾岩和浅灰色钙质砂岩为中心,正常沉积岩系列灰白色白云质灰岩、黑色泥晶灰岩、杂色泥质粉砂岩、青灰色泥灰岩和红色膏溶角砾岩分布于其周围。灰褐色灰岩角砾岩和浅灰色钙质砂岩构成了金顶矿区的2种主要矿石类型,二者空间上密切共生,近直立的灰岩角砾岩分布于近水平的钙质砂岩层的下部,构成似“蘑菇”状的几何形态。架崖山-北厂矿段岩石地层学的特征揭示了兰坪金顶铅锌矿泥底辟机制的成因特点,为矿区勘查和外围寻找金顶式矿床提供了新恩路。     

岷江上游第四纪叠溪古堰塞湖的演化

采用岩性相和沉积体系的分析方法对岷江上游流域的阶地进行了研究．发现叠溪较场到太平村以北约28km的沿江河段内断续分布有湖相沉积。对太平村一带的三级阶地沉积识别出冲积扇沉积体系、湖泊沉积体系、河流沉积体系和风成、表生沉积体系。认为古堰塞湖发育2期高湖平面,其间存在低湖面期形成的古土壤层。根据最高湖泊沉积与堵江滑坡体的顶部高度对比和堰塞湖发育的时间计算,太平村地区相对叠溪校场地区存在着平均3．18m／ka的抬升运动。     

冀东马兰峪背斜南翼与西部倾伏端盖层变形特征及其构造意义

燕山中部冀东遵化、迁西、青龙一带以太古宇深变质结晶岩系为核部的东西向构造形迹长期以来被认为是一个复式背斜构造,近年来又有学者提出它是一个中生代变质核杂岩。这2种不同认识涉及到华北克拉通北部中生代区域大地构造演化和稳定克拉通内部大型基底结晶岩系的剥露机制问题。对马兰峪背斜南翼和西部倾伏端盖层岩系开展的详细构造研究表明,变形总体表现为连续的褶皱变形及伴生的逆冲构造;构造样式表现为基底卷入式的厚皮构造与盖层内部软弱岩系控制的薄皮构造共存的特征;变形机制表现为顺层挤压导致的纵弯弯曲和相关的断裂构造;近南北向的缩短率介于16%～27%之间。盖层岩系中未发现变质核杂岩构造模型所预期的系列高角度正断层。基底与盖层不整合面接触带尽管在后期构造变形过程中曾经发生过局部的差异性滑动,但并不是造成大规模构造剥蚀和地壳柱切失的剥离断层。因此,冀东马兰峪背斜不是中生代的变质核杂岩,而是水平挤压背景下基底结晶岩系与盖层共同卷入纵弯褶皱变形的厚皮式褶皱构造。     

Spatial distribution features and environment effect of heavy metal in intertidal surface sediments of Guanhe estuary, Northern Jiangsu Province

In northern Jiangsu coastal zone area, Guanhe River is the biggest river and has the best navigation conditions among rivers which flow into the Yellow Sea. The grain sizes show gradual increase from the high intertidal zone to lower intertidal zone. The heavy metal values have slight changes along both sides of the river mouth, but show an evident change perpendicular to the tidal flat. In the latter case, they show a good correlation with grain size fluctuation, that is, the heavy metal values gradually decline when the grain size increases from the high intertidal zone to the lower intra-tidal zone. Analyses of the heavy metal elements show that on the Guanhe estuary surface sediment, the content of the elements Hg, As and Cu is above background values; Pb and Zn contents are rather close to the background values; and Cd content is less than the background values. The element Hg comes out to be harmful in a medium level to ecological environment, while the elements of Cr, As, Cu, Pb, Zn and Cd fall in a safe range of MPL. On the whole, Guanhe estuary tidal flat is not very harmful to the ecology in terms of the heavy metals. __________ Translated from Marine Geology & Quaternary Geology, 2007, 27(5): 23–32 [译自: 海洋地质与第四纪地质]     

贵州糯东井田水文地质条件分析

通过对井田内泉和暗河流量的调查研究,认为永宁镇组一、三段碳酸盐岩裂隙溶洞水为井田的主要含水层,含水层主要接受大气降水及河流的渗透补给;煤层上覆地层飞仙关组为相对隔水层,厚度大于500m,下覆无强含水层,其地下水对煤层的开采影响不大,井田水文地质条件较简单。采用比拟法对井田的涌水量进行了预算,推算该矿井开采设计涌水量为13 238m^3/d。     

基于本体的地理空间信息集成框架与实现

论述了地理本体的基本概念、结构,介绍了地理本体的建模方法,提出了基于地理本体的空间数据集成框架,包括构建地理本体、数据预处理、概念映射、数据映射和数据抽取与转换5个步骤;设计了基于本体的空间数据集成方案,以数字地形图数据、海图数据向标准本体的集成为例对方案进行验证试验,并取得了初步成果。