Inversely-Mapped Analytical Solutions for Flow Patterns around and within Inclined Elliptic Inclusions in Fluid-Saturated Rocks

In this paper, an inverse mapping is used to transform the previously-derived analytical solutions from a local elliptical coordinate system into a conventional Cartesian coordinate system. This enables a complete set of exact analytical solutions to be derived rigorously for the pore-fluid velocity, stream function, and excess pore-fluid pressure around and within buried inclined elliptic inclusions in pore-fluid-saturated porous rocks. To maximize the application range of the derived analytical solutions, the focal distance of an ellipse is used to represent the size of the ellipse, while the length ratio of the long axis to the short one is used to represent the geometrical shape of the ellipse. Since the present analytical solutions are expressed in a conventional Cartesian coordinate system, it is convenient to investigate, both qualitatively and quantitatively, the distribution patterns of the pore-fluid flow and excess pressure around and within many different families of buried inclined elliptic inclusions. The major advantage in using the present analytical solution is that they can be conveniently computed in a global Cartesian coordinate system, which is widely used in many scientific and engineering computations. As an application example, the present analytical solutions have been used to investigate how the dip angle of an inclined elliptic inclusion affects the distribution patterns of the pore-fluid flow and excess pore-fluid pressure when the permeability ratio of the elliptic inclusion is of finite but nonzero values.     

焦煤集团九里山矿14101工作面突水治理浅析

通过对焦煤集团九里山矿14101工作面底板突水经过的研究,认为工作面底板突水的水源是是Lg灰岩水,其直接补给水源为L2灰岩水,间接补给水源为O2灰岩水;导水通道为底板采动裂隙带。采取了在工作面打水闸墙,利用钻孔对采空区灌注骨料,增加水流阻力,切断导水通道,封堵水源,加固隔水层的地面注浆和井下工程相结合的综合治水方案。通过观察,工作面中间巷无水流出,突水前后水位变化明显,在较短时间内获得了堵水成功。取得了显著的经济效益和社会效益,为矿井突水治理积累了经验。     

Spatial orientation of the spin vectors of the disk galaxies in the Virgo cluster I. A catalogue of the disk galaxies in the Virgo cluster

Based on four UK Schmidt Telescope (UKST) IIIa-j direct plates which had been digitized by the Automated Plate Measuring System (APM), a detailed identification of the disk galaxies in the Virgo cluster has been carried out. The certain and possible member galaxies are mainly selected from the updated Catalogue of 2096 Galaxies in the Virgo Cluster Area (VCC). The area of this identification covers a 85 square degree region centered on this cluster. As a result, we compiled a new catalogue of 340 certain and possible member disk galaxies, including 85 lenticulars (SO), 136 spirals (S) and 119 irregulars (Irr), where the APM-measured values of the position angle (P.A.) and diameters of 299 disk galaxies are provided. For at least 149 galaxies, the values of the P.A. and diameters are published for the first time.Comparison between the APM-measured P.A. and diameters of galaxies and those given by the Uppsala General Catalog of Galaxies (UGC) demonstrates the reliability of our data. The statistical properties and completeness of this database are also discussed. Compared with the UGC-given P.A. and diameters which were determined by eyes, our data has no selection effect owing to the instrument measurements. Within our searching region, this might be the largest and relatively complete photometric database published so far for investigating the spatial orientation of the spin vectors of galaxies in the Virgo cluster.     

铁砚磨穿指蘸墨 不用扬鞭自奋蹄——志《山西地震》创刊20周年

回顾了《山西地震》创刊20年的历史,叙述了《山西地震》.编辑部在自身建设、执行科技期刊编排标准、为防震减灾事业默默奉献的情况,总结了经验、教训,指出了今后努力的方向.     

流体在岩浆型铬铁矿和铂族元素成矿过程中的作用及意义

镁铁- 超镁铁岩是揭示地幔物质组成和壳幔相互作用的重要窗口，也是Ni- Cu- PGE- Cr等金属矿产资源的重要载体。不同的镁铁- 超镁铁岩体赋矿特征明显不同：蛇绿岩以产出铬铁矿床为特征，阿拉斯加型岩体主要赋含铂族元素(PGE)矿床，大型层状岩体则可同时产出铬铁矿床、PGE矿床和Cu- Ni硫化物矿床。这种成矿差异显然与赋矿岩体形成的构造背景、母岩浆经历的岩浆演化过程有关，但缺少关键控制因素的研究。前人对上述不同种类矿床的研究工作主要集中于地幔源区的部分熔融、上升过程中或岩浆房内的围岩混染和结晶分异等岩浆过程，而极少关注流体作用。近年来，实验岩石学和岩石地球化学的研究均表明幔源岩浆演化过程中的流体活动可能对成矿元素的富集迁移起到至关重要的作用，同时这些成矿元素的赋存状态和分配系数也在不断更新。厘清Cr和PGE在熔体演化——尤其是流体出溶过程中的地球化学行为，刻画并揭示其迁移富集、分离和再富集的成矿过程及控制因素，已成为当前岩浆矿床研究的热点。本文围绕富水流体与铬铁矿和PGE成矿关系的科学问题，总结了不同镁铁- 超镁铁岩体的成矿差异以及铬铁矿和PGE矿床成矿过程中的流体活动记录，提出流体性质和组分对铬铁矿和PGE迁移富集的控制作用，强调有必要开展蛇绿岩、大型层状镁铁- 超镁铁岩体和阿拉斯加型岩体的对比研究。     

随钻测录井地质导向二维分解实时绘图方法

根据随钻测录井实时地质导向和大斜度、水平井评价成图技术需求，针对传统绘图方法存在的弊端，提出了将测录井信息、井眼轨迹和地质模型进行二维分解的实时绘图方法。针对二维分解绘图方法绘图时空复杂度较高的问题，给出了不同事件驱动下的局部实时计算和拷屏重绘算法，控制了对CPU和内存的消耗、提高了绘图效率，消除了实时绘图的闪烁和卡顿现象。应用实例表明，二维分解实时绘图方法能够实现大尺度随钻测录井地质导向图形的流畅、无卡顿实时绘图，可提高大斜度、水平井储层模型评价的刻画精度和时效。     

科尔沁沙地土地利用与耕作方式对土壤风蚀的影响

土壤风蚀造成的直接生态后果是土地资源的退化。在春播前两次沙尘暴事件中,对科尔沁沙地几种具有代表性的土地类型的土壤风蚀量及土壤特性进行了野外测定、分析,结果表明:(1)在同一沙尘暴天气下,由于土地利用和耕作方式的不同,土壤风蚀量存在着差异,新垦农地和翻耕农地的风蚀量显著高于未垦草地、免耕农地和麻黄地;免耕农地则与未垦草地的风蚀量相差不大,风蚀危害较轻;麻黄地几乎不受风蚀侵害。新垦农地、翻耕农地、免耕农地、未垦草地、麻黄地两次观测的土壤风蚀量平均值依次为24.59、15.60、2.26、1.46和0.22 g/h.cm2。(2)基于土壤特性计算的土壤退化指数结果表明,新垦农地和翻耕农地发生了较为严重的退化。     

Spectral Simulation and Conditioning to Local Continuity Trends in Geologic Modeling

Spectral simulation has gained application in building geologic models due to the advantage of better honoring the spatial continuity of petrophysical properties, such as reservoir porosity and shale volume. Distinct from sequential simulation methods, spectral simulation is a global algorithm in the sense that a global density spectrum is calculated once and the inverse Fourier transform is performed on the Fourier coefficient also only once to generate a simulation realization. The generated realizations honor the spatial continuity structure globally over the whole field instead of only within a search neighborhood, as with sequential simulation algorithms. However, the disadvantage of global spectral simulation is that it traditionally cannot account for the local information such as the local continuity trends, which are often observed in reservoirs and hence are important to be accounted for in geologic models. This disadvantage has limited wider application of spectral simulation in building geologic models. In this paper, we present ways of conditioning geologic models to the relevant local information. To account for the local continuity trends, we first scale different frequency components of the original model with local-amplitude spectrum ratios that are specific to the local trend. The sum of these scaled frequency components renders a new model that displays the desired local continuity trend. The implementation details of this new method are discussed and examples are provided to illustrate the algorithm.