Characterization of spatial and temporal variation of suspended sediments in the Yellow and East China Seas using satellite ocean color data

Total suspended sediment (TSS) data concentrations are retrieved from two sets of satellite ocean color data (the Moderate Resolution Imaging Spectroradiometer (MODIS) onboard Aqua and the Korean Geostationary Ocean Color Imager (GOCI)) using an existing regional model to characterize spatial and temporal variation of TSS in the Yellow and East China Seas. MODIS-derived TSS maps show that TSS concentrations are, in general, high along the Korean and Chinese coasts including the Bohai Sea and the Yangtz River estuary, and lower in the middle of the Yellow Sea and the southeastern area of the East China Sea. The monthly average of 10-year MODIS data reveals that TSS values are highest during winter (January to February) and lowest in summer (July to August). Short-term TSS concentrations retrieved from GOCI data showed the dominant influence of semi-diurnal tidal changes on sediment dynamics through temporal (hourly) and spatial distribution in coastal zones of the Yellow sea. The results presented here demonstrate that the satellite-derived TSS products can be utilized as an application tool for future studies on long- and short-term sediment dynamics of turbid coastal waters. In particular, GOCI observations provide unique important capabilities to characterize and quantify the water properties at high temporal (hourly) and spatial (0.5 km) resolutions in the turbid coastal waters of the Yellow Sea and its vicinities.     

利用TrackRT进行GPS实时动态形变监测研究

在相对实时动态定位软件TrackRT的基础上进行二次开发,完善了数据流实时传输与解码,并设计了两组模拟地面运动的观测实验,分别对TrackRT水平向和垂直向上的内外符合精度进行了评定。结果表明,在观测数据质量较好的情况下,实时定位水平分量精度优于2cm,垂向分量精度优于4cm。     

矿山开采沉陷预计空间插值方法分析研究

文章首先对GIS中5种常用的空间插值方法原理进行了详细阐述,采用交叉验证法来对比分析不同插值方法的精度。应用反距离权重法、克里金法、自然邻域法、样条函数法、趋势面法5种常用的空间插值方法对兖矿集团济三煤矿1308工作面开采沉陷预计数据进行插值,对比分析了各种插值方法的精度,并对插值的误差影响因素进行了实验分析。结果表明：5种常用的空间插值方法中,克里金插值和样条函数插值精度最高,自然邻域插值和反距离权重插值精度居中,趋势面插值精度最低;对插值结果造成影响的因素与沉陷预计点的数量和密度有关,沉陷预计点的密度越大、数量越多,空间插值结果的精度就越高。研究成果可为矿山开采沉陷预计插值方法的选取提供借鉴。     

机载激光雷达数据的建筑物三维模型重建

机载激光雷达技术可以快速获取建筑物高精度高密度的三维空间信息.文章提出一种建筑物三维模型重建方法,该方法利用栅格数据使用RANSAC算法提取建筑边界上的长线段,采用规则化策略获取建筑轮廓;在模型生成阶段,基于原始点云和屋顶拓扑关系约束,获取屋顶间的交线和交点,并结合已得到的建筑边界、屋顶间交线和交点获取三维建筑模型.实验结果表明,该方法思路清晰、科学可行且适用性强,提取的建筑边界和模型垂直精度高.     

主元分析变换空间上的鉴别共同矢量人脸识别方法

给出了在主元分析(PCA)变换空间上求取DCV投影矩阵的方法(PCA+DCV),在保留所有鉴别信息的条件下,显著降低了算法复杂度,提高了运算效率。进一步提出了依据主元成分对应特征值进行适度权重的DCV识别方法(WPCA+DCV),一定程度上减小因光照、饰物遮挡等造成的面部变化带来的识别影响,增强表征信息,提高识别率。在ORL、YALE和AR人脸库上的实验结果证实了本方法的性能。     

月面形貌的3维可视化算法

基于大范围地形可视化算法研究的基础上,对平面geometry clipmaps算法进行改进,利用GPU的顶点着色器实现平面地形向球面地形的投影变换,并综合利用球面视域裁剪、球面视点控制等技术,使geometry clipmaps算法适用于球面海量地形数据的3维可视化;收集处理月球全球影像和形貌高程数据,对算法进行验证,实现月球表面形貌的实时动态3维可视化.试验表明:绘制算法可不受数据量大小的限制、绘制效率高、效果逼真,但存在两极变形较大的缺点.

Abstract：

Based on the study of visualization arithmetic of large area terrain, plane geometry clipmaps algorithm is improved. Projection transformation from plane landform to sphere landform was realized by using GPU vertex shader. In that improved algorithm, methods such as sphere vision field culling and sphere viewpoint control are used.That makes geometry clipmops algorithm more effective in 3D visualization of massive sphere terrain data. The whole moon image and DEM data are collected and disposed, which are used to verify the capability of that algorithm, realizing dynamic and real time 3D visualization of moon surface. The experiments show that the graphic algorithm isn't limited by data quantity, which is of high efficiency and reality simulation, but the two-pole distortion is serious.     

Exploring uncertainty in remotely sensed data with parallel coordinate plots

The existence of uncertainty in classified remotely sensed data necessitates the application of enhanced techniques for identifying and visualizing the various degrees of uncertainty. This paper, therefore, applies the multidimensional graphical data analysis technique of parallel coordinate plots (PCP) to visualize the uncertainty in Landsat Thematic Mapper (TM) data classified by the Maximum Likelihood Classifier (MLC) and Fuzzy C-Means (FCM). The Landsat TM data are from the Yellow River Delta, Shandong Province, China. Image classification with MLC and FCM provides the probability vector and fuzzy membership vector of each pixel. Based on these vectors, the Shannon's entropy (S.E.) of each pixel is calculated. PCPs are then produced for each classification output. The PCP axes denote the posterior probability vector and fuzzy membership vector and two additional axes represent S.E. and the associated degree of uncertainty. The PCPs highlight the distribution of probability values of different land cover types for each pixel, and also reflect the status of pixels with different degrees of uncertainty. Brushing functionality is then added to PCP visualization in order to highlight selected pixels of interest. This not only reduces the visualization uncertainty, but also provides invaluable information on the positional and spectral characteristics of targeted pixels.     

计算机串口记时延迟的测量与分析

动态测量中,需要记录观测量的观测时刻,时刻作为测量的基本观测量,需要较高的计时精度,通过串口利用计算机计时是一种便捷可行的方法,但串口的时延是必须要考虑的因素。本文介绍了计算机串口计时的原理及影响其时延的相关因素,阐述了进行时延测量的方法,并通过实验对影响串口时延的5种因素进行了相应的测试和分析,实验结果表明,通常情况下串口时延在毫秒级,通过提高计时程序优先级的方法可成功将时延减小至0.35m s以内;低动态条件下串口时延对动态测量的影响较小,在某些检测设备中甚至可以忽略。     

基于小波分解的动态变形预报

阐述了小波变换和多分辨率分析的基本原理,简要地介绍了离线预报和在线预报两种不同的变形预报方式,并在此基础上提出了基于小波分解的动态变形预报的方法,并通过实际算例证明了这种方法的有效性。     

使用价值分析优化方法在功能-技术矩阵求解中的应用

功能-技术矩阵,经众多工作者的努力研究,已渐趋成熟与实用。但如何利用功能-技术矩阵构造在广义现代设计领域中适用的科学模式,解决多学科设计方案的组成与评价问题,还存在薄弱环节。本文利用\