水岩作用下泥质板岩软化非线性机制研究

水岩作用下泥质板岩表现出明显的软化特征。通过单轴压缩试验分析了泥质板岩软化过程中单轴压缩强度、弹性模量和泊松比与吸水时间之间的关系;借助核磁共振试验研究了水岩作用下泥质板岩软化过程中孔隙的产生、扩展和贯通规律,分析了泥质板岩软化过程中孔隙度与吸水时间之间的关系;采用电镜扫描试验分析了水岩作用下泥质板岩软化过程中微观结构的演变规律,基于分形理论研究了不同浸泡时间下泥质板岩分形维数的变化规律;运用非线性动力学理论,选取微观结构孔隙形状分维值、孔隙度、单轴抗压强度、弹性模量作为描述泥质板岩与水溶液相互作用系统的变量,建立了水岩作用下泥质板岩的软化模型,结合试验数据验证了模型的适用性。结果表明:泥质板岩单轴抗压强度、弹性模量随吸水时间增大而减小,呈负线性相关,而泊松比与吸水时间之间的关系不明显;在浸泡初期,水岩作用强烈,泥质板岩内部微孔隙会发生扩展贯通进而形成更大尺寸的孔隙,孔隙度在浸泡初期增长较快;随着浸泡时间的延长,水岩作用减弱,孔隙度增长速率趋缓;随着吸水时间的推移,泥质板岩内部孔隙相互连通,进而形成复杂网状结构的大孔,泥质板岩分形维数呈对数增长,最终趋于稳定;采用非线性模型计算的结果与...     

Molybdenum Mass Fractions and Isotopic Compositions of International Geological Reference Materials

The double‐spike method with multi‐collector inductively coupled plasma‐mass spectrometry was used to measure the Mo mass fractions and isotopic compositions of a set of geological reference materials including the mineral molybdenite, seawater, coral, as well as igneous and sedimentary rocks. The long‐term reproducibility of the Mo isotopic measurements, based on two‐year analyses of NIST SRM 3134 reference solutions and seawater samples, was ≤ 0.07‰ (two standard deviations, 2s, n = 167) for δ^98/95Mo. Accuracy was evaluated by analyses of Atlantic seawater, which yielded a mean δ^98/95Mo of 2.03 ± 0.06‰ (2s, n = 30, relative to NIST SRM 3134 = 0‰) and mass fraction of 0.0104 ± 0.0006 μg g^?1 (2s, n = 30), which is indistinguishable from seawater samples taken world‐wide and measured in other laboratories. The comprehensive data set presented in this study serves as a reference for quality assurance and interlaboratory comparison of high‐precision Mo mass fractions and isotopic compositions.     

农作物长势遥感监测业务化应用与研究进展

农作物长势监测可为田间管理提供及时的决策支持信息和早期估产提供依据。为了更好地研究作物生长过程中不同遥感监测作物长势方法的适用性,从多光谱遥感数据、高光谱遥感数据和微波遥感数据的应用及遥感监测指标与模型模拟方面综述了国内外农作物长势遥感监测研究及业务化应用的最新进展,指出了未来拟重点加强的研究任务,包括高时空分辨率和高光谱分辨率遥感数据的业务化技术、多遥感反演参数协同监测作物长势技术研发、基于遥感信息与作物过程模型的集合预报技术研究、全球尺度作物长势监测业务运行系统研发。     

天宝GEOXT数据采集模式及精度研究

随着经济的不断发展,移动GIS越来越受到人们的关注,而GEOXT的出现正是符合这一发展趋势的产物。GEOXT这一款仪器将GPS与GIS结合在一起,利用GPS技术得出GIS的成果。文中在说明天宝GEOXT数据采集系统配置及特点的基础上,通过实验总结了数据采集的3种模式：单机码相位测距、后差分改正和实时差分改正数据采集,并对数据采集的技术流程、点位精度、特点和应用范围进行了阐述。最后对不同采集时间间隔对精度的影响进行了试验研究。     

野山河码头隧道爆破设计

分析野三河码头隧道爆破施工要求,通过相应的经验公式计算,确定野山河码头隧道的爆破参数,以保证隧道爆破施工过程中所引起的振动速度不大于邻近建筑物的安全允许振速,并保证开挖过程中的效率。     

2022年1月8日青海门源M6.9地震余震精确定位与断层面拟合

利用青海和周边87个地震台站于2022年1月8—13日记录的青海门源M6.9地震主震及680次余震资料,经双差地震定位重新进行震源位置的修定,获得633个地震重新定位后的震源信息。结果显示,此次地震的余震分布明显以昌马—俄博断裂南末梢端为界分为东、西两段,西段呈近EW向沿托勒山断裂东段分布,东段呈NWW向沿冷龙岭断裂西段分布。重新定位前余震初始震源深度集中分布在5~15 km,重新定位后变化为在0~20 km深度范围内偏正态分布。根据重新定位后余震分布特点并参考地表破裂带的展布,依据成丛地震发生在断层附近的原则,选取2个矩形区域,基于这2个区域内重新定位后的震源信息,利用模拟退火与高斯\|牛顿相结合的算法进行断层面拟合计算,完整地获得每一个拟合区域的断层面参数。结果表明托勒山断裂东段断层面与冷龙岭断裂西段断层面分别为长约15 km总体走向为近EW向的高倾角左旋走滑断裂与长约12 km总体走向为NWW向的高倾角大型左旋走滑断裂。此次青海门源地震可能是上述两断层面末端相互挤压共同破裂形成的。     

苍山5.2级地震的地形变特征及机制

运用新方法对苍山地震前后的形变资料进行了异常识别，重点分析形变异常的变化特征及机制。结果显示；（１）苍山地震是大面积应力积累、调整的结果；（２）以外围区１００－２００ｋｍ中短及短期异常为主，而震中１００ｋｍ内的近源区异常并不显著；（３）进入短期的异常标志是中短期异常出现转折或反向。     

真江蓠杭州湾海域栽培试验及生态因子对藻体生长的影响

在杭州湾上海金山海域进行了真江蓠(Gracilaria verrucosa)栽培试验并在实验室内研究了温度、盐度和光照强度对真江蓠生长的影响。结果表明,温度、盐度和光照强度对真江蓠的生长影响极显著(P0.01)。真江蓠生长适宜温度为20~30℃;适宜盐度为15~25;适宜光照强度在90μmol/(m2.s)左右。温度、盐度和光照强度对真江蓠生长存在显著的交互效应(P0.05),三者的最佳组合为温度25℃、盐度20和光照强度90μmol/(m2.s)。海区栽培实验表明真江蓠可在杭州湾海域正常生长,全年平均特定生长率(RSG)为9.42%/d。     

Crude-oil hydrocarbon composition characteristics and oil viscosity prediction in the northern Songliao Basin

Crude oil hydrocarbon composition characteristics and oil viscosity prediction are important bases in petroleum exploration.A total of 54 oil/heavy-oil samples and 17 oil sands were analyzed and quantified using both comprehensive 2D gas chromatography(GC×GC)and comprehensive 2D gas chromatography/time-of-flight mass spectrometry(GC×GC/TOFMS).The results show that crude oil in the West slope is mainly heavy oil and its hydrocarbon composition is characterized overall by paraffinsmono-aromaticsnaphthenesnon-hydrocarbonsdi-aromaticstri-aromaticstetra-aromatics.Aromatics are most abundant and non-hydrocarbons are least abundant,whilst content differences among paraffins,naphthenes,aromatics,and non-hydrocarbons are less than 15%.There are two types of heavy oil,secondary type and mixing type.Biodegradation is the main formation mechanism of heavy oil.Biodegradation levels cover light biodegradation,moderate biodegradation,and severe biodegradation.With increasing biodegradation,paraffin content decreases while contents of aromatics and nonhydrocarbons increase.In contrast,naphthene content increases first and then decreases with increasing biodegradation.In severe biodegradation stage,naphthenes decrease more quickly than aromatics and non-hydrocarbons.This provides a new method for studying oil/heavy-oil biodegradation mechanism and biodegradation resistance of different hydrocarbons at different biodegradation stages.In the Longhupao-Daan terrace and Qijia-Gulong depression,most crude oil is conventional oil.Its composition is dominated by paraffins with the lowest content of aromatics.In some casual oil wells from the Longhupao-Daan terrace,crude oil from Saertu oil reservoirs is moderately biodegraded whereas crude oil from Putaohua oil reservoir is lightly biodegraded.Chemical parameters using saturate hydrocarbons and aromatics are usually not suitable for determining organic type and thermal maturity of biodegraded oil,especially of moderately or severely biodegraded oil,whilst Ts/(Ts+Tm)ratio can be used to determine thermal maturity of both conventional crude oil and heavy oil.