铜陵地区老鸦岭层状钼矿床铅同位素组成研究

安徽铜陵老鸦岭矿床中二叠系大隆组(P2d)顶部的含矿(钼矿化)黑色页岩以及附近(立新煤矿)同一层位不含矿黑色页岩的实测铅同位素组成分别为：^206Pb/^204Pb20.20～22.37,^207Pb/^204Pb15.67～15.82,^208Pb/^204Pb38.47～38.60和^206Pb/204Pb18.83～20.80,^207Pb/^204Pb15.65～15.76,^208Pb/^204Pb38．84～39．22。对137Ma的放射成因Pb进行校正后的铅同位素组成表明，含矿黑色页岩和不含矿黑色页岩均与燕山晚期火成岩无关，老鸦岭含矿黑色页岩可能具沉积成因。对沉积(约250Ma)以来的放射成因Pb进行校正后的铅同位素组成表明：不含矿黑色页岩的Pb源自上地壳，而含矿黑色页岩的Pb(因而推测其他成矿金属)可能源于上地壳物质(与不含矿黑色页岩的Pb源相似)与下地壳物质的混合。     

沸石在水环境治理中的应用现状与前景

文章叙述了沸石的基本结构以及吸附、离子交换特性，总结了近年来国内外有关沸石在水环境保护方面的研究与应用成果，提出了沸石在今后的水环境保护和改善方面将具有广泛的应用前景。     

时域瞬变场电磁场有限差分法

模拟电磁场在地下介质中的传播规律是理解地下介质响应的重要手段，直接应用有限差分法在时间域对二维、三维瞬变场进行数值分析是一种有效方法。应用反映电磁场基本规律的麦克斯韦方程组，导出时域场量的齐次扩散方程，对所研究的空间区域作差分离散，源作为初始条件加入，采用合适的边界条件，利用差分方程进行计算，从而得到场量的数值结果，展现瞬变场在地下随时间扩散的全过程，对电磁场的瞬态响应有更加直观的了解。     

冬小麦遥感冠层温度监测土壤含水量的试验研究

在冬小麦主要生育期(2002年4月初到5月底),对不灌溉的冬小麦测定了冠层温度、地温、气温以及土壤含水量,计算了冠气温差且分析了冠层温度和冠气温差与不同土层厚度的土壤含水量相关关系。结果表明:14:00的冠层温度能较好地反映20cm土层的土壤含水量变化,但与其它各土层相关性有较大的波动性;14:00的冠气温差能较好地反映40cm以上土层的土壤含水量变化,二者的相关性很高,在20cm、40cm土层,两者相关系数R2分别为0.98866、0.99389,这为用区域遥感数据反演主要生育期冬小麦的冠气温差进而监测区域40cm土壤含水量提供了实验性的依据;拔节期和灌浆期,用14:00冠气温差来拟合各土壤层的土壤含水量有较高的精度,从而为用区域遥感数据监测区域土壤含水量提供了经验性的模型。     

南秦岭十里坪锑矿床成矿时代及成因的初步研究

十里坪锑矿床受赵川陆缘隆_滑构造的主滑脱拆离带的控制。矿体呈脉状赋存于韧_脆性主滑脱带上部的脆性次级断层_节理中,矿石类型主要为萤石石英辉锑矿型。围岩为太古宙_元古宙变质岩系,围岩蚀变弱。成矿流体属H2O_CO2_NaCl体系,流体包裹体盐度w(NaCleq)为3.6%～11.3%,均一温度为109～232℃,形成压力大致为800×105Pa。硫、铅同位素研究表明,矿质主要来源于变火山岩围岩;氢、氧同位素显示,成矿流体以大气降水为主,初步将该矿床定为变质岩源就地式大气降水热液矿床。矿石中萤石Sm_Nd等时线年龄为(392±24)Ma,与南秦岭北部晚古生代拗陷区热水喷流_沉积成矿时代相一致,它们都形成于秦岭微板块泥盆纪非造山裂解阶段。     

新疆天山表壳元素地球化学特征

根据天山地区(42～44^oN，81～89^oE)1：20万，七探采集的900余个岩石样品的分析结果，基于全样本统计和迭代剔除方法，得到新疆天山地区表壳(出露地壳)的39种元素丰度值；对其中的SiO2、TiO2、Al2O3、TFe2O3、MgO、MnO、CaO、Na2O、K2O、P2O5 10种常量元素，按氧化物之和为100％进行归算。与全球大陆上地壳元素丰度值相比，天山地区表壳元素丰度富集SiO2、MnO和Ag、As、Hj、Sb元素，明显亏损CaO和。Be、Co、Cr、Ni、Mo、Sn，V、W等元素。从元素比值来看，该区表壳的Ba/La、K／La、K／Th、Nb/La、Th/La、Y／La值与全球大陆上地壳相应元素值相当；而K／Na、La／As、La／Sb值明显低于全球大陆上地壳。该区表壳化学成分相当于花岗闪长岩，同时表现出相对富钠和As、Sb元素的特征；这一地球化学特征与区内出露的表壳岩石主要是加里东期和海西期岛弧造山作用的产物有关，相对富钠的成分特征与岛弧岩浆活动中的Adakite质岩浆作用有关。     

Web-cam’s potential for collaborative activities in the Earth sciences

We report here our experiences from using easily acquired web-cam components for collaborative ventures in the Earth sciences. We have used a variety of hardware and different software. We demonstrate from various locations in the U.S.A. the feasibility of using web-cam in multitudinous activities, relevant for conducting research and knowledge dissemination. We summarize the quality of the connections from the various combinations of communicating parties. Today, web-cams can be utilized as an economical and viable means of point-to-point communication in the Earth science community. Greater bandwidth is sorely needed for activities such as multi-party conferencing on the present internet network. We propose that web-cam can be readily deployed as a web-service for facilitating collaborative research over the GRID infrastructure, using the middleware Narada-Brokering. Web-cam will play an important role in the emerging field of geoinformatics.     

Indicator Simulation Accounting for Multiple-Point Statistics

Geostatistical simulation aims at reproducing the variability of the real underlying phenomena. When nonlinear features or large-range connectivity is present, the traditional variogram-based simulation approaches do not provide good reproduction of those features. Connectivity of high and low values is often critical for grades in a mineral deposit. Multiple-point statistics can help to characterize these features. The use of multiple-point statistics in geostatistical simulation was proposed more than 10 years ago, on the basis of the use of training images to extract the statistics. This paper proposes the use of multiple-point statistics extracted from actual data. A method is developed to simulate continuous variables. The indicator kriging probabilities used in sequential indicator simulation are modified by probabilities extracted from multiple-point configurations. The correction is done under the assumption of conditional independence. The practical implementation of the method is illustrated with data from a porphyry copper mine.     

Applicability of a Backprojection Algorithm to Reconstruct Images of Subsurface Horizontal Planes for Laboratory Experiments in Electrical Resistance Tomography

This paper describes the use of a backprojection algorithm to reconstruct subsurface images of the electrical resistivity in horizontal planes parallel to the surface. The algorithm can be applied to detect buried objects such as tanks or pipes and possible leakages from them. Two imaging strategies are compared: juxtaposition of vertical planes, and 3D reconstruction from the sensitivity matrix corresponding to the entire volume whose surface is explored. The electrode arrays used for voltage measurement are the dipole–dipole array and a modified Schlumberger array. A personal computer controls current injection, electrode switching, and voltage detection. The system injects 1 kHz, 20 V peak-to-peak square waveforms, thus avoiding electrode polarization effects. Experimental laboratory measurements show that the algorithm detects localized objects such as an insulating sphere and a conductive cylinder immersed in water. Furthermore, covering half of the cylinder by a rubber sleeve to simulate a nonconductive leak, yields a distinct image for the leak. The backprojection algorithm does not need any regularization parameter and it is very fast in inverting the sensitivity matrix because it approximates the inverse matrix by its transposed. The dipole–dipole array usually yields a lower overall pixel error than the modified Schlumberger array but both allow the detection of simulated underground leaks.     

地心非旋转坐标系中的TWSTT计算模型

根据卫星双向时间传递(TWSTT)的基本原理，详细推导了地心非旋转坐标系中TWSTT的计算模型．并与地固系中的计算模型进行了分析比较，证明了两种计算模型在0．1ns亚纳秒量级上的等价性。