环境因素对毛乌素沙地旱柳树干液流的影响分析

在干旱-半干旱地区,研究植物的耗水特征及与气象因子、地下水水位的关系对水资源合理开发利用和生态环境保护具有重要的意义。采用原位监测方法,对气象、树干液流、土壤含水率和地下水水位进行了观测,研究了毛乌素沙地广泛分布及与地下水关系密切的旱柳与气象因子、土壤含水率以及地下水水位的关系。研究表明:水汽压亏缺和潜在蒸散发是控制旱柳耗水最重要的气象因素;研究期内,土壤含水率对旱柳耗水的影响较小;旱柳的耗水与地下水具有密切的关系,随着水位埋深的增大,旱柳的耗水先增大后减小,在水位埋深1.25 m处达到最大。利用地下水的昼夜波动计算了地下水的蒸散发消耗量,发现旱柳的用水与地下水的蒸散发消耗量具有一定的相关性,表明地下水是旱柳重要的用水水源。     

美国声波钻进规程ASTM D6914/D6914M—16浅析

声波钻进技术具有速度快、岩心保真好、适用地层广等优点,广泛应用于工程勘察、环境调查、浅源地热、基础工程、矿山治理等领域。为了提高声波钻进施工质量和过程控制,美国材料与实验协会于2004年制定了第一部声波钻进规程D6914—04,后经多次修订完善,形成最新声波钻进规程D6914/D6914M—16。本文根据该版规程内容,从技术原理、钻进设备、成孔工艺等方面展开了阐述。当振动器与钻柱谐振频率重叠时,声波钻头受到的能量达到峰值。钻机和取心钻具是声波钻进的核心设备。成孔工艺主要以双管高频振动、低速回转为主,实现多种目的层的原位取心作业。标准相关内容对声波钻进技术在我国的持续推广具有参考意义。     

内蒙古西乌旗罕乌拉地区下二叠统寿山沟组碎屑锆石LA-ICP-MS U-Pb年龄及其地质意义

中亚造山带南缘二叠纪的构造背景一直存在争议。以内蒙古西乌旗罕乌拉地区发育的寿山沟组为研究对象,开展了野外地质、岩石学、碎屑锆石LA-ICP-MS U-Pb年龄研究。2个样品锆石阴极发光图像和Th/U值指示,锆石为岩浆成因锆石。103颗碎屑锆石年龄测试结果显示,年龄信息可划分为5组:285~328Ma,峰期年龄302Ma;338~361Ma;455~490Ma;757Ma;1278Ma、2380Ma。最年轻的年龄为285Ma,结合侵入其中的花岗岩同位素年龄,指示西乌旗罕乌拉地区寿山沟组沉积时限介于285~280Ma之间,主体沉积时代应为早二叠世Sakmarian期—Artinskian期。寿山沟组碎屑锆石反映出近源、快速沉积的特点,沉积物源中含有较多的火山碎屑物,可能代表弧后盆地沉积,为早二叠世古亚洲洋闭合前洋壳俯冲消减作用的沉积响应。结合区域资料,寿山沟组碎屑锆石的年龄对应于东北地区的变质基底及其后的构造岩浆事件,物源区物质主要来自于苏尼特左旗—锡林浩特—西乌旗一带早石炭世末—晚石炭世岩浆弧及贺根山—东乌旗一带,并进一步限制了华北与西伯利亚两大板块的缝合线应位于寿山沟组发育地区的南部,即索伦缝合带,拼合时代最可能为晚二叠世—早三叠世。     

Landslides triggered by the 2016 Mj 7.3 Kumamoto,Japan, earthquake

The aim of this study is to establish a detailed and complete inventory of the landslides triggered by the Mj 7.3 (Mw 7.0) Kumamoto, Japan, earthquake sequence of 15 April 2016 (16 April in JST). Based on high-resolution (0.5–2 m) optical satellite images, we delineated 3,467 individual landslides triggered by the earthquake, occupying an area of about 6.9 km². Then they were validated by aerial photographs with very high-resolution (better than 0.5 m) and oblique field photos. Of them, 3,460 landslides are distributed in an elliptical area about 6000 km², with a NE-SW directed 120-km-long long axis and a 60-km-long NW-SE trending short axis. Most of the landslides are shallow, disrupted falls and slides, with a few flow-type slides and rock and soil avalanches. The analysis of correlation between the landslides and several control factors shows the areas of elevation 1000–1200 m, stratum of Q₃-Hvf, seismic intensity VIII and VIII+, and peak ground acceleration (PGA) 0.4–0.6 g register the highest landslide abundance. This study also discussed the relationship between the spatial pattern of the landslides and the seismotectonic structure featured by a strike-slip fault with a normal component and the volcanism in the study area.     

Study on the deformation and failure modes of filling slope in loess filling engineering: a case study at a loess mountain airport

Lvliang airport is a typical loess filling engineering located in 20.5 km north of Lvliang City in Shanxi Province, China. By the end of March 2012, 14 fissures extending more than 7.5 m were observed in a loess-filled slope, of which the longest fissure is up to 82 m. Field monitoring and laboratory tests have been performed to investigate the slope failure modes. The test program includes wetting tests on unsaturated compacted samples and stress path tests on saturated samples. Field monitoring and observations show that differential settlement caused by non-homogeneity in compacted loess density might lead to the formation of fissures in the loess-filled slope. It was founded that the wetting deformation contributed to the development of differential settlement. Fissures are the essential factor for the loess-filled slope failure. Four deformation stages exhibit in the loess-filled slope prior final failure including development of the fissures, softening of the compacted loess, creeping of the slope leading edge and fissuring of the trailing edge and formation of the through-sliding surface. Development of the sliding surface mainly includes upward and downward expansion of the fissures. Upward expansion is a wetting failure process in loading condition, while downward expansion is a load-off wetting process. In addition, development of the sliding surface is accelerated by softening of the compacted soils as a result of water infiltration. Therefore, the key for taking countermeasures against filling landslides is to monitor and control the development of differential settlement and fissures in the slope shoulders. Digging out and extra-filling the fissures are an effective way for preventing these landslides.     

Probabilistic calibration of a coupled hydro-mechanical slope stability model with integration of multiple observations

Multiple types of responses, such as displacements, ground water level, pore water pressures, water contents, etc., are usually measured in comprehensive monitoring programmes for rainfall-induced landslide prevention. In this study, a probabilistic calibration method for coupled hydro-mechanical modelling of slope stability is presented with integration of multiple types of measurements. A numerical example of a soil slope under rainfall infiltration is illustrated to compare the effects of single and multiple types of responses on parameter estimation and model calibration. The results show that the soil parameters can be estimated with less uncertainty and total uncertainty bounds are narrower with multiple types of responses than with a single type of response. Model calibration based on multiple types of responses can compromise different responses and hence the means and standard deviations of model error are the smallest. A feasible correlation coefficient between soil modulus and permeability can be obtained from model calibration with multiple types of responses and single type of response as long as the responses include displacement data.     

Study on the quantitative relationship between soil in situ strength and drilling parameters

The rational use of drilling parameters is a hot issue in the field of geotechnical engineering and geological engineering. A new method, for evaluating the bearing capacity of soils using drilling parameters was proposed. First, through the mechanical analysis of the drill bit, the preconditions and theoretical formulas for calculating the bearing capacity of soils using the bit’s torque are clearly defined. Next, drilling tests and dynamic cone penetration tests were performed on miscellaneous fill, silty clay, sandy clay, medium coarse sand and gravel sand, and the empirical formula for calculating the bearing capacity of these soils were given. Then, using the new method and the empirical formula, the bearing capacity of the soil under the roadbed was examined. The test results show that the bit’s torque is a good parameter for the evaluation of the bearing capacity of the soil. Finally, the application scope of the new method and the empirical formula is discussed, and the subsequent research directions are pointed out.     

Characterization,modeling, and remediation of karst in a changing environment

This introductory editorial paper provides a review and prospective outlook of the achievements and challenges in karst research under a changing environment. A brief discussion of the past and future karst research has been focused on: (1) data and new technologies; (2) modeling of karst flow and reactive transport; (3) responses of karst hydrosystems to climate variability and changes across scales.     

Study on the natural radioactivity level of stone coal-bearing strata in East China

Based on γ-radiation dose rate and radon concentration measurements and ²³⁸U, ²³²Th, ²²⁶Ra, and ⁴⁰K radionuclide testing, this study identifies the radioactive anomalies of stone coal-bearing strata in East China and evaluates the natural radioactivity levels in the air, solid, water and plant media in the typical area of the regional stone coal-bearing layers. The stone coal-bearing strata in East China occur in the lower Cambrian system along the margin of the Yangtze block; additionally, the radioactive anomaly area is sporadically distributed in the stone coal-bearing layers. The background values of ²³⁸U, ²³²Th, ²²⁶Ra, and ⁴⁰K are higher in the stone coal-bearing areas, and the spatial distribution of these natural radionuclides shows significant variability. ²³⁸U and ²²⁶Ra clearly accumulate in the coal, coal gangue and soil and are the main sources of the environmental radiation in coal mines. The γ-radiation shows a higher background value in the stone coal-bearing area, and this radioactive pollution cannot be ignored. Typically, the effective dose of γ-radiation exceeds the limit value of 5 mSv/a, and the total α and total β concentrations of the groundwater are 10–30 times the limit value at some points. The residents near the mining area are subjected to a higher radiation dose, and the groundwater, building materials, and plants have been contaminated by the radioactive pollution sporadically through time. It is necessary to strengthen the monitoring work of radioactive environments and to take appropriate control measures.     

Laboratory investigations of inert gas flow behaviors in compact sandstone

The seepage evolution behavior of compact rock is significant for the stability and safety of many engineering applications. In this research, both hydrostatic and triaxial compression tests were conducted on compact sandstone using an inert gas, namely argon. A triaxial compression test with a water permeability measurement was carried out to study the difference between the gas permeability and water permeability evolutions during the complete stress–strain process. Based on the experimental data, the hydrostatic stress-dependent gas permeability was discussed firstly. A second-order function was proposed to predict and explain the gas slippage effect. The mechanical properties and crack development of the sandstone samples were discussed to better understand the permeability evolution with crack growth during the complete stress–strain process. The results show that the gas permeability evolution can be divided into five stages according to the different crack growth stages. Then, the permeability changes in the crack closure stress \( \sigma_{\text{cc}} \), crack initiation stress \( \sigma_{\text{ci}} \), crack damage stress \( \sigma_{\text{cd}} \) and peak stress \( \sigma_{\text{p}} \) with confining pressures were analyzed. Finally, we found that the difference between the corrected gas permeability and water permeability can be attributed to the interaction between the water and sandstone grains.