Slope inclinometers for landslides

Slope inclinometers/indicators are used to determine the magnitude, rate, direction, depth, and type of landslide movement. This information is usually vitally important for understanding the cause, behavior, and remediation of a landslide. However, many inclinometer measurements fail to achieve these intended aims because of lack of appreciation of the many factors that need to be correctly implemented during installation, monitoring, and data reduction to yield useful data. This paper presents some guidelines for understanding, installing, and interpreting slope inclinometers and presents three case histories that illustrate some of the pitfalls that can develop if these guidelines are not followed.     

初至层析静校正在复杂山地三维地震勘探中的应用

随着地形高差增大、地貌单元多变、近地表模型复杂,目前被广泛应用的初至折射静校正的精度已无法满足精细勘探的要求。初至层析静校正技术,由给定的初始模型进行正演,用射线追踪方法得到初始模型的初至波,利用该初至波和实际拾取的初至波进行比较,计算地表模型的修正量,反复迭代求得准确的地表模型。山西省国阳新能股份有限公司二矿390水平九采扩区地表标高940～1100m,地貌单元复杂,在对该区资料处理时,利用初至层析折射静校正,经9次迭代计算后,真实地刻划出近地表模型。在二种静校正技术对比中,初至折射静校正不但近地表模型精度低于层析折射静校正,而且其叠加剖面精细程度也远低于层析静校正,如在初至折射静校正叠加剖面同相轴上呈现的凹凸形态,在层析静校正叠加剖面并无显示,且后者剖面的信噪比也比前者明显提高。     

Using Sequential Self-Calibration Method to Identify Conductivity Distribution: Conditioning on Tracer Test data

An iterative inverse method, the sequential self-calibration method, is developed for mapping spatial distribution of a hydraulic conductivity field by conditioning on nonreactive tracer breakthrough curves. A streamline-based, semi-analytical simulator is adopted to simulate solute transport in a heterogeneous aquifer. The simulation is used as the forward modeling step. In this study, the hydraulic conductivity is assumed to be a deterministic or random variable. Within the framework of the streamline-based simulator, the efficient semi-analytical method is used to calculate sensitivity coefficients of the solute concentration with respect to the hydraulic conductivity variation. The calculated sensitivities account for spatial correlations between the solute concentration and parameters. The performance of the inverse method is assessed by two synthetic tracer tests conducted in an aquifer with a distinct spatial pattern of heterogeneity. The study results indicate that the developed iterative inverse method is able to identify and reproduce the large-scale heterogeneity pattern of the aquifer given appropriate observation wells in these synthetic cases.     

The Tau Model for Data Redundancy and Information Combination in Earth Sciences: Theory and Application

Many decision-making processes in the Earth sciences require the combination of multiple data originating from diverse sources. These data are often indirect and uncertain, and their combination would call for a probabilistic approach. These data are also partially redundant with each other or with all others taken jointly. This overlap in information arises due to a variety of reasons—because the data arises from the same geology, because they originate from the same location or the same measurement device, etc. The proposed tau model combines partially redundant data, each taking the form of a prior probability for the event being assessed to occur given that single datum. The parameters of that tau model measure the additional contribution brought by any single datum over that of all previously considered data; they are data sequence-dependent and also data value-dependent. Data redundancy depends on the sequence in which the data is considered and also on the data values themselves. However, for a given sequence, averaging the tau model parameters over all possible data values leads to exact analytical expressions and corresponding approximations and inference avenues. Information on multiple-point connectivity of permeability arrives from core data, well-test data and seismic data which are defined over varying supports with complex redundancy between these information sources. In order to compute these tau weights for determining connectivity, one needs a model of data redundancy, here expressed as a vectorial training image (Ti) constructed using a prior conceptual knowledge of geology and the physics of data measurement. From such a vectorial Ti, the tau weights can be computed exactly. Neglecting data redundancy leads to an over-compounding of individual data information and the possible risk of making extreme decisions.     

Group Time Delay in the Reflection of P-Polarized Electromagnetic Plane Waves at a Stratigraphic Interface

The group time delay (GTD) formulae of quasi-total reflection of inhomogeneous P-polarized electromagnetic waves (P-PEW, whose electric field parallels to the plane of incidence), caused by the Goos–Hänchen effect, is derived by the phase shift of the wave. A numerical example where the frequency equals to 1 GHz is given. The curves of calculating results show that there are three discontinuous points at the critical angle of phase shift vector, the critical angle of attenuation vector and 90^○. When the angle of incidence is equal to one of these three angles, the GTD will become infinite, and the electromagnetic wave will propagate along the interface. The GTD will be very large, when the angle of incidence is close to one of these three angles. The results indicate that there is an important relationship between the two critical angles and the conductivity and permittivity of the two strata, and that the GTD has an important relationship with the angle of incidence. These results can be used to determine the lithology of the strata and to delimit the interfaces of strata more effectively. It is suggested that this research may prove useful in electromagnetic logging analysis and, perhaps, in the design of logging instruments.     

Stability Analysis and Numerical Simulation of Differential Frost Heave

Differential frost heave is often implicated in the formation of patterned ground in regions subject to recurrent freezing and thawing. A linear stability analysis (LSA) indicates that a continuum model of frost heave is linearly unstable under typical natural freezing conditions of silty-clay soils. A two-dimensional non-linear numerical analysis corroborates the frozen time LSA results, and also indicates the importance of non-linear and time-dependent terms that ultimately lead to a preferred mode, which the LSA fails to predict. Instability of the one-dimensional solution occurs at shallow freezing depths and near-zero surface loads when positive perturbations in the ice content at the freezing front lead to a concomitant increase in thermomolecular pressure and upward ice velocity. Differential frost heave can then occur because of the increased heat flux from the perturbed surfaces. A three-dimensional model using random initial surface perturbations indicates that regular surface patterns will evolve with a length scale in the order of 2–4 meters, which corresponds quite closely with naturally-occurring non-sorted patterned ground.     

Non-Linear Theory and Power-Law Models for Information Integration and Mineral Resources Quantitative Assessments

Singular physical or chemical processes may result in anomalous amounts of energy release or mass accumulation that, generally, are confined to narrow intervals in space or time. Singularity is a property of different types of non-linear natural processes including cloud formation, rainfall, hurricanes, flooding, landslides, earthquakes, wildfires, and mineralization. The end products of these non-linear processes can be modeled as fractals or multifractals. Hydrothermal processes in the Earth’s crust can result in ore deposits characterized by high concentrations of metals with fractal or multifractal properties. Here we show that the non-linear properties of the end products of singular mineralization processes can be applied for prediction of undiscovered mineral deposits and for quantitative mineral resource assessment, whether for mineral exploration or for regional, national and global planning for mineral resource utilization. In addition to the general theory and framework for the non-linear mineral resources assessment, this paper focuses on several power-law models proposed for characterizing non-linear properties of mineralization and for geoinformation extraction and integration. The theories, methods, and computer system discussed in this paper were validated using a case study dealing with hydrothermal Au mineral potential in southern Nova Scotia, Canada.     

Inversely-Mapped Analytical Solutions for Flow Patterns around and within Inclined Elliptic Inclusions in Fluid-Saturated Rocks

In this paper, an inverse mapping is used to transform the previously-derived analytical solutions from a local elliptical coordinate system into a conventional Cartesian coordinate system. This enables a complete set of exact analytical solutions to be derived rigorously for the pore-fluid velocity, stream function, and excess pore-fluid pressure around and within buried inclined elliptic inclusions in pore-fluid-saturated porous rocks. To maximize the application range of the derived analytical solutions, the focal distance of an ellipse is used to represent the size of the ellipse, while the length ratio of the long axis to the short one is used to represent the geometrical shape of the ellipse. Since the present analytical solutions are expressed in a conventional Cartesian coordinate system, it is convenient to investigate, both qualitatively and quantitatively, the distribution patterns of the pore-fluid flow and excess pressure around and within many different families of buried inclined elliptic inclusions. The major advantage in using the present analytical solution is that they can be conveniently computed in a global Cartesian coordinate system, which is widely used in many scientific and engineering computations. As an application example, the present analytical solutions have been used to investigate how the dip angle of an inclined elliptic inclusion affects the distribution patterns of the pore-fluid flow and excess pore-fluid pressure when the permeability ratio of the elliptic inclusion is of finite but nonzero values.     

鲍店煤矿突水条件分析

对影响鲍店3煤安金井采的3煤顶、底部砂岩和红层的水文地质条件进行了分析,对其突水特征作了简明讨论,应用突水判别模式对本矿十采区作了安全开采评价,划分了可能突水的工作面,对今后的安全开采有一定的指导意义.