On the intrinsic shape of the gamma-ray spectrum for Fermi blazars

The curvature of the γ-ray spectrum in blazars may reflect the intrinsic distribution of emitting electrons, which will further give some information on the possible acceleration and cooling processes in the emitting region. The γ-ray spectra of Fermi blazars are normally fitted either by a single power-law(PL) or a log-normal(call Logarithmic Parabola, LP) form. The possible reason for this difference is not clear. We statistically explore this issue based on the different observational properties of 1419 Fermi blazars in the 3 LAC Clean Sample. We find that the γ-ray flux(100 Me V–100 Ge V) and variability index follow bimodal distributions for PL and LP blazars, where the γ-ray flux and variability index show a positive correlation. However, the distributions of γ-ray luminosity and redshift follow a unimodal distribution. Our results suggest that the bimodal distribution of γ-ray fluxes for LP and PL blazars may not be intrinsic and all blazars may have an intrinsically curved γ-ray spectrum, and the PL spectrum is just caused by the fitting effect due to less photons.     

秦皇岛近岸海域绿藻微观繁殖体的分布以及在绿潮形成中的作用

2015年以来,秦皇岛近岸海域暴发了绿潮,对北戴河旅游区的环境和生态系统造成了严重影响。绿藻微观繁殖体在绿潮的形成过程中起到重要作用,主要包括孢子、配子、幼苗和营养片段。绿藻微观繁殖体作为绿潮的“种源”,其分布规律可以反映绿潮的“藻源”位置。本研究于2016年4-9月和2017年1月对秦皇岛近岸海域绿藻微观繁殖体的调查,探究了其分布规律以及生物量变化。结果显示,绿藻微观繁殖体主要分布在近岸海域,由近岸向远岸海域逐渐降低。绿藻微观繁殖体的数量在7、8月份最高,在冬季最低。受绿潮影响严重的海域微观繁殖体数量高于其它海域。秦皇岛近岸海域的绿藻微观繁殖体为该海域绿潮的种源,其分布规律表明秦皇岛近岸海域绿潮起源于本地。     

Enhancing the mechanical properties of marine clay using cement solidification

Abstract

The use of soft clay and dredged marine clays as the construction material is challenging. This is because the high water content, high compressibility and low permeability of the clay causing the instability of ground and structure. This detrimental effect of soft clay can be improved by the cement solidification process, which is relatively cheap and efficient. This paper mainly focuses on the study of improvement on the mechanical behavior of cement mixed marine clay. The soil is reconstituted by using ordinary Portland cement of 5%, 10%, 15% and 20% by its mass. The study reveals that cementation of clay significantly improves the peak and residual strength of soil. Similarly, the primary yield stress of the soil is also improved from 16 to 275?kPa as cement content increases from 5% to 20%, respectively. By using statistical tools, the relationships between various parameters are established, which are very important to define the mechanical behavior of the clay. This study reveals that the yield surface of the solidified marine clay is not a smooth elliptical surface. Rather it is composed of two linear surfaces followed by a log-linear surface which can be modeled by using simple parameters obtained from triaxial tests.     

Nitrogen fixation driven by mesoscale eddies and the Kuroshio Current in the northern South China Sea and the East China Sea

N₂ fixation rates(NFR, in terms of N) in the northern South China Sea(nSCS) and the East China Sea(ECS) were measured using the acetylene reduction assay in summer and winter, 2009. NFR of the surface water ranged from 1.14 nmol/(L·d) to 10.40 nmol/(L·d)(average at(4.89±3.46) nmol/(L·d), n=11) in summer and 0.74 nmol/(L·d) to 29.45 nmol/(L·d)(average at(7.81±8.50) nmol/(L·d), n=15) in winter. Significant spatio-temporal heterogeneity emerged in our study: the anticyclonic eddies(AE)(P...     

软悬挂状态下隔水管动力特性分析

建立了软悬挂状态下隔水管动力分析模型,采用有限单元法对模型进行离散,结合Newmark-β法对动态方程求解,并对模型进行验证,最后选取南海某口深水井实际参数,对软悬挂状态下隔水管动力特性进行分析。研究结果表明:软悬挂状态下隔水管底端横向位移最大,顶部铰接处弯矩最大。软悬挂状态下,隔水管横向位移与弯矩随着海底隔水管总成(LMRP)重量增加而减小,随着平台运动速度、平台航向与海流方向夹角增大而增大;回收隔水管减小悬挂长度有利于减小最大横向位移,但会造成弯矩轻微增加;采用旋转刚度适当较大的挠性接头则有利于减小隔水管挠性接头以下整体位移与弯矩。研究成果为钻井平台避台撤离时隔水管的安全提供理论指导。     

潮汐和风对马六甲海峡海流的影响

基于非结构有限体积法海洋模型FVCOM(Finite-Volume Community Ocean Model), 建立了马六甲海峡及其毗邻海域高分辨率水动力数值模型, 研究了风和潮流作用下的余环流结构以及水体输运特征。结果表明, 马六甲海峡航道中央潮流运动以往复流为主, 边缘存在旋转流; 主要研究区域内落潮流速略大于涨潮流速, 东南窄道处流速最大; 因峡道束窄变浅, 在涨落潮过程中潮流发生汇聚与分离; 主要研究区域东南段存在3个显著的潮致余环流; 东北季风驱动时模型响应为海峡海流整体向西北方向流动, 西南季风时反之; 季风期间潮致表层余环流结构被破坏, 但底层余流仍存在水平环流结构, 且随着风速增加, 底层余环流的数目、大小、形状、位置均会产生变化; 季风过渡期余环流结构也会发生部分改变, 尤其是小潮期间风场影响效果显著。     

Reproductive cycle of Ophiopholis mirabilis (Echinodermata: Ophiuroidea) in Zhangzi Island area,northern Yellow Sea

Ophiopholis mirabilis is a common species with a high population density on the western coasts of the northern Pacifi c Ocean.The number of O.mirabilis has been increasing recently in the scallop aquaculture zone(the Zhangzi Island area,northern Yellow Sea)in China.To explore the mechanism of its population variation,the reproductive cycle of O.mirabilis was investigated in this area(39°04′N;122°51′E)from February 2017 through January 2018 and determined by the monthly gonad index(GI),histological examinations of the gonads and the oocyte size-frequency distribution.O.mirabilis had a clear annual reproductive cycle that was synchronous between males and females.Sea temperature and food availability played important roles in O.mirabilis reproduction.The GI value was less reliable for determining reproductive activity in O.mirabilis because the nutritive tissues within the gonads may be utilized to synthesize gametes,leading to a decrease in GI during maturation.The histological results also show that abundant nutritive phagocytes were present in the gonads of O.mirabilis,which,together with the germ cells,aff ected the weight of the gonads.In addition,the mature oocytes of O.mirabilis were relatively small(75–150μm),indicating that the larval development was planktotrophic.This study provided insights into the reproductive patterns and biology of O.mirabilis and is an essential basis for the quantity control of this species in aquaculture areas.     

Using stable isotopes to understand seasonal and interannual dynamics in moisture sources and atmospheric circulation in precipitation

Stable isotopes in precipitation are useful tracers to strengthen understanding of climate change and hydrological processes. In this study, the moisture sources of 190 precipitation events in Beijing were analysed using the Hybrid Single‐particle Lagrangian Integrated Trajectory model, based on which we studied the relation between variations in precipitation δ¹⁸O and dynamics in moisture sources and atmospheric circulation in seasonal and interannual timescales. Categorization of 7 groups of moisture sources was performed, among which oceanic moisture sources presented lower δ¹⁸O in precipitation than continental moisture sources. The results show that seasonal variations of precipitation δ¹⁸O were caused by changes of moisture sources. In summer, moisture from proximal oceans dominated vapour transport to Beijing due to increasing monsoon strength and resulted in a relatively small variation of precipitation δ¹⁸O. At the interannual timescale, the variations of δ¹⁸O in summer precipitation were related to dynamics in oceanic moistures, showing depleted values when the contribution of oceanic moistures, especially the proportion of long‐distance oceanic moisture, was high. Further analysis indicated that changes of oceanic moisture sources were controlled by the strength of summer monsoons. These findings address the complexity of moisture sources in midlatitude monsoon areas and suggest that isotopic signals in precipitation have the potential to deduce changes in moisture sources and atmospheric circulation and can therefore serve for palaeoclimate reconstruction.     

Polygonal grain‐based distinct element modeling for mechanical behavior of brittle rock

The microstructure of rock was numerically reproduced by a polygonal grain‐based model, and its mechanical behavior was examined by performing the uniaxial compression test and Brazilian tests via the Universal Distinct Element Code. The numerical results of the model demonstrated good agreement with the experimental results obtained with rock specimens in terms of the stress–strain behavior, strength characteristics, and brittle fracture phenomenon. An encouraging result is that the grain‐based model‐Universal Distinct Element Code model can reproduce a low ratio of tensile to compressive strength of 1/20 to 1/10 without the need for an additional process. This finding is ascribed to the fact that the geometrical features of polygons can effectively capture the effects of angularity, finite rotation, and interlocking of grains that exist in reality. A numerical methodology to monitor the evolution of micro‐cracks was developed, which enabled us to examine the progressive process of the failure and distinguish the contribution of tensile cracking to the process from that of shear cracking. From the observations of the micro‐cracking process in reference to the stress–strain relation, crack initiation stress, and crack damage stress, it can be concluded that the failure process of the model closely resembles the microscopic observations of rock. We also carried out a parametric study to examine the relationships between the microscopic properties and the macroscopic behavior of the model. Depending on the micro‐properties, the model exhibited a variety of responses to the external load in terms of the strength and deformation characteristics, the evolution of micro‐cracks, and the post‐peak behavior. Copyright © 2016 John Wiley & Sons, Ltd.     

Generation of continuous surface soil moisture dataset using combined optical and thermal infrared images

Surface soil moisture (SSM) is a critical variable for understanding water and energy flux between the atmosphere and the Earth's surface. An easy to apply algorithm for deriving SSM time series that primarily uses temporal parameters derived from simulated and in situ datasets has recently been reported. This algorithm must be assessed for different biophysical and atmospheric conditions by using actual geostationary satellite images. In this study, two currently available coarse‐scale SSM datasets (microwave and reanalysis product) and aggregated in situ SSM measurements were implemented to calibrate the time‐invariable coefficients of the SSM retrieval algorithm for conditions in which conventional observations are rare. These coefficients were subsequently used to obtain SSM time series directly from Meteosat Second Generation (MSG) images over the study area of a well‐organized soil moisture network named REMEDHUS in Spain. The results show a high degree of consistency between the estimated and actual SSM time series values when using the three SSM dataset‐calibrated time‐invariable coefficients to retrieve SSM, with coefficients of determination (R²) varying from 0.304 to 0.534 and root mean square errors ranging from 0.020 m³/m³ to 0.029 m³/m³. Further evaluation with different land use types results in acceptable debiased root mean square errors between 0.021 m³/m³ and 0.048 m³/m³ when comparing the estimated MSG pixel‐scale SSM with in situ measurements. These results indicate that the investigated method is practical for deriving time‐invariable coefficients when using publicly accessed coarse‐scale SSM datasets, which is beneficial for generating continuous SSM dataset at the MSG pixel scale.