麦盖提斜坡奥陶系碳酸盐岩碳氧同位素特征及其意义

依据实测的塔里木盆地麦盖提斜坡玉北地区41个碳酸盐岩碳氧同位素数据,结合岩石学方法,研究了碳氧同位素的组成、演化及其地质意义。数据显示,δ~(13) C值主要分布在-2.6‰~0.7‰,均值为-1.0‰;δ~(18) O值分布在-9.4‰~-3.5‰,均值为-6.9‰。玉北地区古盐度为118.39~126.34,平均为121.94。奥陶系碳酸盐岩淡水改造作用明显。碳氧同位素的组成和演化不但可以指示沉积环境,而且还与生物生产率以及古海平面变化呈正相关性:δ~(13) C的低值对应于局限台地台内滩亚相沉积环境;δ~(13) C的高值对应于开阔台地滩间海、台内滩亚相沉积环境。碳氧同位素组成还对成岩环境有明显响应:鹰山组δ~(13) C与δ~(18) O均向高负值偏移,表明经历过强烈的表生岩溶作用;蓬莱坝组δ~(13) C低—中负值,δ~(18) O表现为高负值,在白云岩储层中可见鞍状白云石及燧石,主要为深埋藏成岩环境;良里塔格组同位素特征为δ~(18) O高负值,δ~(13) C低正值,并且在进入埋藏岩溶阶段之前还经历过风化壳岩溶作用。     

Particle shape effect on thermal conductivity and shear wave velocity in sands

This study presents the correlations between quantified shape parameters and geotechnical properties for nine sand specimens. Four shape parameters, sphericity, convexity, elongation and slenderness, were quantified with two-dimensional microscopic images with the aid of image processing techniques. An instrumented oedometer cell is used to measure compressibility, thermal conductivity and shear wave velocity during loading, unloading and reloading stages. As the particle shape inherently determines the initial loose packing condition, initial void ratio and shape parameters are well correlated with compressibility. The applied stress in soils increases the interparticle contact area and contact quality; round particles tend to achieve higher thermal conductivity and shear wave velocity during stress-induced volume change. Multiple linear regression is implemented to capture the relative contributions of involved variables, revealing that the thermal evolution is governed by the initial packing density and particle shape. The experimental observations underscore the predominant effect that particle shape has on the geomechanical and physical properties upon stress-induced soil behavior.     

A comparative study of landslide susceptibility mapping using weight of evidence,logistic regression and support vector machine and evaluated by SBAS-InSAR monitoring: Zhouqu to Wudu segment in Bailong River Basin,China

The determining of landslide-prone areas in mountainous terrain is essential for land planning and hazard mitigation. In this paper, a comparative study using three statistical models including weight of evidence model (WoE), logistic regression model (LR) and support vector machine method (SVM) was undertaken in the Zhouqu to Wudu segment in the Bailong River Basin, Southern Gansu, China. Six conditionally independent environmental factors, elevation, slope, aspect, distance from fault, lithology and settlement density, were selected as the explanatory variables that may contribute to landslide occurrence based on principal component analysis (PCA) and Chi-square test. The relation between landslide distributions and these variables was analyzed using the three models and the results then used to calculate the landslide susceptibility (LS). The performance of the models was then evaluated using both the highly accurate deformation signals produced by using the Small Baseline Subset Interferometric Synthetic Aperture Radar technique and Receiver Operating Characteristic (ROC) curve. Results show more deformation points in areas with high and very high LS levels, and also more stable points in areas with low and very low LS levels for the SVM model. In addition, the SVM has larger area under the ROC curve. It indicates that the SVM has better prediction accuracy and classified ability. For the interpretability, the WoE derives the class of factors that most contributed to landsliding in the study area, and the LR reveals that factors including elevation, settlement density and distance from fault played major roles in landslide occurrence and distribution, whereas the SVM cannot provide relative weights for the variables. The outperformed SVM could be employed to determine potential landslide zones in the study area. Outcome of this research would provide preliminary basis for general land planning such as choosing new urban areas and infrastructure construction in the future, as well as for landslide hazard mitigation in Bailong River Basin.     

DFT study of the carbonation on mineral aerosol surface models of olivine: effect of water

Mineral aerosols play a significant role in gas–solid interfacial and atmospheric chemistry. Carbonation of olivine aerosol, which takes place in a multiphase reaction processes, can be an effective means to reduce the concentration of atmospheric carbon dioxide. Due to the presence of a huge reserve of silicate minerals in nature, olivine aerosol could be an ideal potential raw material for mineral carbonation for its higher reactivity with H₂O and CO₂. However, quantitative information about the carbonation process on the surface of natural olivine aerosol is not available. In this paper, calculations on the carbonation reaction processes with and without a H₂O molecule using a periodic olivine model has been carried out via the density functional theory. The pathways and their corresponding energies and structures in the carbonation reactions have been established, and the effect of water as means to reduce the energy barriers and stabilize the carbonated structures by forming hydrogen bonds has been confirmed.     

Seismic design and testing of buckling‐restrained braces with a thin profile

A thin‐profile buckling‐restrained brace (thin‐BRB) consists of a rectangular steel casing and a flat steel core that is parallel to a gusset plate. A thin configuration reduces the width of the restraining member and thus saves usable space in buildings. However, deformable debonding layers, which cover the steel core plate in order to mitigate the difference between the peak tensile and compressive axial forces, provide a space for the steel core to form high mode buckling waves when the thin‐BRB is under compression. The wave crests squeeze the debonding layers and produce outward forces on the inner surface of the restraining member. If the restraining member is too weak in sustaining the outward forces, local bulging failure occurs and the thin‐BRB loses its compression capacity immediately. In order to investigate local bulging behavior, a total of 22 thin‐BRB specimens with a ratio of steel core plate to restraining steel tube depth ranging from 0.3 to 0.7 and axial yield force capacities ranging from 421 kN to 3036 kN were tested by applying either cyclically increasing, decreasing, or constant axial strains. The restraining steel tube widths of all the specimens were smaller than 200 mm and were infilled with mortar with a compressive strength of 97 MPa or 55 MPa. Thirteen of the 22 thin‐BRB specimens' restraining members bulged out when the compressive core strains exceeded 0.03. A seismic design method of the thin‐BRB in preventing local bulging failure is proposed in this study. Test and finite element model (FEM) analysis results suggest that the outward forces can be estimated according to the BRB compressive strength, steel core high mode buckling wavelength, and the debonding layer thickness. In addition, the capacity of the restraining member in resisting the outward forces can be estimated by using the upper bound theory in plastic analysis. Both the FEM analysis and test results indicate that the proposed method is effective in predicting the possibility of local bulging failure. Test results indicate that the proposed design method is conservative for thin‐BRB specimens with a large steel core plate to restraining steel tube depth ratio. This paper concludes with design recommendations for thin‐BRBs for severe seismic services. Copyright © 2015 John Wiley & Sons, Ltd.     

不同围压和流体饱和状态下致密砂岩弹性各向异性特征

为研究致密砂岩声波速度及其各向异性随围压的变化规律以及不同流体饱和状态下的弹性各向异性特征,钻取了不同方向的岩心并在实验室超声波频率下对致密砂岩的声学特性进行了测量,分别给出干燥和饱和水状态下,不同方向样品纵横波速度、刚性系数以及各向异性系数随围压的变化规律,并对实验结果进行了分析讨论.实验结果表明致密砂岩纵横波速度、纵横波速度比以及刚性系数均随围压增加而增加,但其在不同饱和状态下的变化率却截然不同;纵横波速度比、各向异性系数在饱和水状态下变化规律不明显,表明孔隙流体的存在对于岩石物理性质有着非常重要的影响.这方面的实验工作不但对于考察不同流体性质对致密岩石弹性各向异性影响是必要的,而且有助于致密砂岩油水和气层的识别.     

中国房间空气调节器行业节能减排潜力分析

2012年,中国房间空气调节器（空调器）保有量约为3.57亿台,依据抽样调查数据计算得到保有量装机容量,采用各省市夏季平均温度估算超过26℃的时间作为运行时间计算得出年电力消耗约3.28×1011 kW?h,折合碳排放约为318 Mt CO₂当量。由于空调器国内需求量将进一步增长,预计到2030年保有量将达到当前的4～5倍。在电力结构不变情景下,空调器总体能效提高1倍,2030年空调器电力消耗产生的温室气体排放约为603 Mt CO₂当量。假设空调器总体能效提高1倍、高能效产品消费比例进一步提高并伴随中国能源结构调整,如水电、核电、太阳能等低碳能源比例不断提高,在满足中国空调器需求的前提下,2030年中国空调器电力消耗产生的温室气体排放可以争取控制在当前的水平。