A 3D discrete FEM iterative algorithm for solving the water pipe cooling problems of massive concrete structures

Water pipe cooling has been widely used for the temperature control and crack prevention of massive concrete structures such as high dams. Because both under‐cooling and over‐cooling may reduce the efficiency of crack prevention, or even lead to great harm to structures, we need an accurate and robust numerical tool for the prediction of cooling effect. Here, a 3D discrete FEM Iterative Algorithm is introduced, which can simulate the concrete temperature gradient near the pipes, as well as the water temperature rising along the pipes. On the basis of the heat balance between water and concrete, the whole temperature field of the problem can be computed exactly within a few iteration steps. Providing the pipe meshing tool for building the FE model, this algorithm can take account of the water pipe distribution, the variation of water flow, water temperature, and other factors, while the traditional equivalent algorithm based on semi‐theoretical solutions can only solve problems with constant water flow and water temperature. The validation and convergence are proved by comparing the simulated results and analytical solutions of two standard second‐stage cooling problems. Then, a practical concrete block with different cooling schemes is analyzed and the influences of cooling factors are investigated. In the end, detailed guidance for pipe system optimization is provided. Copyright © 2015 John Wiley & Sons, Ltd.     

广东新会市人口,耕地,粮食问题及灰色模型预测

在我国改革开放政策实行较早的广东珠江三角洲地区，我们对地处西南部的新会市进行了为期两年的全面、典型抽样调查。发现全市的耕地面积和播种面积呈下降趋势，单产虽有较大幅度的增长但粮食总产量的增长缓慢，速度低于全市总人口的自然增长率，因此人均粮食产量呈下降趋势。根据建立的灰色ＧＭ（１，１）模型预测，新会市２０１０年人均耕地面积只有０．０２５ｈｍ＾２，在“人均４分保命田”之下。因此，本文对该地区作出的粮食及     

人工心肺机流量计的研制

本文介绍了如何应用单片微型计算机和光电传感器组成人工心肺机(或称体外循环机)流量计。该仪器对人工心肺机的泵的各种转速能够准确地采集,对不同的患者能够精确地计算出所需血液流量,从而定量地控制输送给病人的血液流量,以保证心脏手术顺利进行,改变了临床手术时手工计算的落后情况。流量计是一台新型的智能化仪表。     

中长期地震预测方案综合信度评价的层次分析法

由于存在各种复杂的不确定因素的影响，正确合理地评价地震观测结果的可信度，具有一定的难度。本文首先引入具有广泛应用途的层次分析法，并以华北北部为例，结合Ｄｅｌｐｈｉ专家咨询结果，给出了反映各个预测方案结果的可信度及具有满意一致性的相对重要性权系数。其结果可作为综合各种预测方案，确定该地区中长期地震危险区的参考依据。     

技术创新是工程设计的灵魂

南昌有色冶金设计研究院是建国初期创建的有色行业综合甲级设计研究院,现有职工925人,设有36个专业。建院以来为国家基本建设提供了2000余项大中型综合工程和单项设计。共获国家和省(部)级优秀设计奖81项,国家和省(部)级科技进步奖87项。改革开放以来,在铜冶炼方面,先后承担了江西贵溪冶炼厂、安徽铜     

Confidence Evaluation of Medium-and Long-Term Earthquake Prediction by Use of the Analytical Hierarchy Process

This paper offers an approach to the relative confidence level of medium- and long-term earthquake prediction methods by use of the analytical hierarchy process (AHP). We construct the criterion judgment matrices according to the results of an expert questionnaire known as the Delphi scheme. From the matrices we can obtain a scale for the relative preference or priority weight of each factor. The quantitative weights might be applied to make synthetic prediction of earthquake risk areas in the northern part of the North China seismic region.     

Bayes判别分析法与地震短临预测

建立了一套完整的Bayes判别分析方法,并提出了明确的衡量综合预测结果所冒风险大小的风险代价比Kdn该方法可用于不同时间尺度的地震综合预测。选取云南地区1994～1996年的水氡观测资料,采用X2统计检验法识别前兆异常,利用Bayes判别分析方法对云南地区的强震活动性进行了内符检验和外推预测。在风险代价比Kdn取4的情况下,内符检验的R值可达0．54,外推时空占有率0．07,获得了满意的效果。     

热带气旋生成指数对印度洋热带气旋频数变化的适用性研究

本文利用ERA5 1979-2019年逐月大气再分析资料计算南北印度洋热带气旋生成指数，并和IBTrACS观测数据进行比较，探讨用热带气旋生成指数研究南北印度洋热带气旋变化特征的适用性.研究发现热带气旋生成指数能较好地刻画南北印度洋热带气旋的空间分布特征、北印度洋热带气旋个数月变化的双峰结构，以及南印度洋比北印度洋热带气旋发生概率高等特征.最新的IBTrACS v4.0观测资料显示，40年来北印度洋热带气旋每年总生成个数平均每10年增加1.3个，频数的增加主要来源于热带低压和热带风暴，而南印度洋热带气旋每年总生成个数每10年减少2.8个.热带气旋生成指数能很好地描述北印度洋热带气旋生成个数的上升趋势，但对南印度洋热带气旋生成个数趋势的刻画与观测不一致，可能原因需要进一步深入研究.     

Trends in phosphatase activity along a successional gradient of tidal freshwater marshes on the Cooper River South Carolina

Phosphatase activity was measured in sediments from tidal freshwater habitats adjacent to the Cooper River in South Carolina representing different stages of ecological succession. It was found that sediment (0–5 cm) acid phosphatase activity, alkaline phosphatase activity and phosphodiesterase activity increased with increasing successional stage and phytomass. Acid phosphatase activity in creased from 7.5±1.2 (±1 SD) in subtidal sediment from a shallow open water habitat without vegetation to 61.2±4.9 μmol g⁻¹ hr⁻¹ (μmol of p-nitrophenol released per gram of dry sediment per hour) in intertidal sediments colonized by emergent macrophytes, while alkaline phosphatase activity increased from 2.1±0.1 to 19.01±1.5 μmol g⁻¹ hr⁻¹. Phosphodiesterase activity increased from 1.8±0.1 to 20.2±2.0 μmol g⁻¹ hr⁻¹ along the same gradient. Acid phosphatase activity was highly correlated (R²=0.92, P<0.001) with the organic matter content of the sediment. A study of phosphatase kinetics showed that V_max of all phosphatases also increased along the successional gradient. Trends in phosphatase activity and V_max correlated positively with plant biomass and negatively with concentrations of soluble reactive phosphorus in porewater, sediment extractable phosphorus, and total phosphourus. The porewater N∶P atom ratio decreased along the succession gradient from 25.3 in an early stage, open water community to 13.0 in a community dominated by emergent vegetation. The data also show that the distribution of the forms of phosphorus changed with successional stage. The change in distribution and the increased biological demand for phosphorus that paralleled succession were mediated by the activity of phosphatase enzymes.     

黔东南锦屏-天柱地区构造控岩控金特征模拟实验及其力学分析

在前人工作基础上,侧重研究石英脉型金矿床成矿的地质背景,建立了该类型金矿的成矿模式。进而开展三轴温压条件下的成岩成矿实验,构造形变特征及其与成矿物质活化、迁移、富集之间的相互关系的模拟实验。实验结果表明:(1)该区岩石、矿石在高温高压条件下,产生塑性变形(褶皱)和脆性变形(破裂);(2)在变形过程中使成矿物质活化、迁移和富集,形成顺层及穿层的含金石英脉,并在多期多次变形过程中使成矿物质叠加富集;(3)在褶皱(背斜)轴部形成富矿体。模拟实验结果与所建立的该类型金矿构造控矿和成矿模式非常相似。实验资料的力学分析表明,由轴压所产生的构造附加压力大大地提高了实际围压,从而促进了岩石流变、变形和物质的迁移,由此促进含矿流体向构造附加压力小的部位定向迁移、充填和成矿。构造附加压力是促进该区金成矿的重要动力条件。