罗德里格矩阵在共线方程严密解法中的应用

在共线方程严密解法中,人们习用的是以方位元素X_s,Y_s,Z_s,φ,ω,κ为未知数的严密公式。本文则以罗德里格旋转矩阵的三个独立元素b,a,c取代角方位元素φ,ω,κ,并推导了相应的误差方程式。理论表明,新方法在组成旋转矩阵和计算误差方程系数中只需作加、减、乘、除等运算而不需解求三角函数,因而节省了计算工作量。     

离子刻蚀全息光栅的研究

利用国产的光刻胶和国产离子刻蚀机在蒸镀的铝基衬底上进行刻蚀全息光栅,在国内是一项较新的技术。本文介绍和论述了该试验工作的工艺过程、参数计算和测试方法,得出了试验结果和参数计算值基本吻合的结论,并指出了进一步改善质量的方向。     

The Bayesian detection of discontinuities in a polynomial regression and its application to the cycle-slip problem

This paper deals with the problem of detecting and correcting cycle-slips in Global Navigation Satellite System (GNSS) phase data by exploiting the Bayesian theory. The method is here applied to undifferenced observations, because repairing cycle-slips already at this stage could be a useful pre-processing tool, especially for a network of permanent GNSS stations. If a dual frequency receiver is available, the cycle-slips can be easily detected by combining two phase observations or phase and range observations from a single satellite to a single receiver. These combinations, expressed in a distance unit form, are completely free from the geometry and depend only on the ionospheric effect, on the electronic biases and on the initial integer ambiguities; since these terms are expected to be smooth in time, at least in a short period, a cycle-slip in one or both the two carriers can be modelled as a discontinuity in a polynomial regression. The proposed method consists in applying the Bayesian theory to compute the marginal posterior distribution of the discontinuity epoch and to detect it as a maximum a posteriori (MAP) in a very accurate way. Concerning the cycle-slip correction, a couple of simultaneous integer slips in the two carriers is chosen by maximazing the conditional posterior distribution of the discontinuity amplitude given the detected epoch. Numerical experiments on simulated and real data show that the discontinuities with an amplitude 2 or 3 times larger than the noise standard deviation are successfully identified. This means that the Bayesian approach is able to detect and correct cycle-slips using undifferenced GNSS observations even if the slip occurs by one cycle. A comparison with the scientific software BERNESE 5.0 confirms the good performance of the proposed method, especially when data sampled at high frequency (e.g. every 1 s or every 5 s) are available.     

隧道测量的设计和平差

本文对隧道洞外、洞内控制网设计的一般法则进行了简略的论述,采用S-变换通过模拟数据计算验证了这些法则。应用两期变形测量原理将数理统计检验方法用于隧道测量。指出在隧道设计和施工阶段的测量和平差方法。     

Study on the Phenomenon of Geomagnetic Low-value Displacement before Moderately Strong Earthquakes in Gansu

This paper analyzes the distribution characteristics of geomagnetic low-value displacement in Gansu and its adjacent areas from 1995 to 2003 on the basis of the data of the daily amplitude minimum value time of the geomagnetic vertical component. It is shown that in addition to the changing rules of geomagnetic low-value displacement itself, there is a better correlation between geomagnetic low-value displacement and the occurrence of moderately strong earthquakes. There appeared to be geomagnetic low-value displacement before the moderately strong earthquakes in Gansu in the 9 years from 1995 to 2003. This result indicates that geomagnetic low-value displacement is of instructive significance for earthquake prediction to some extents.     

Gridded reconstruction of the population in the traditional cultivated region of China from 1776 to 1953

Using modern census and environmental factor data,this study first identified the environmental factors that significantly affect the population distribution through Geodetector analysis and then constructed a population spatial distribution model based on the random forest regression algorithm.Finally,with this model and historical population data that were examined and corrected by historians,gridded population distributions with a spatial resolution of 10 km by 10 km in the traditional cultivated region of China(TCRC,hereafter)were reconstructed for six time slices from 1776 to 1953.Using the reconstruction dataset,the spatiotemporal characteristics of the population distribution were depicted.The results showed that(1)the environmental factors that significantly affected the population density differences among counties in the TCRC mainly consisted of elevation,slope,relief amplitude,distances to the nearest prefectural and provincial capitals,distance to the nearest river and the climatology moisture index.(2)Using the census data of 1934 counties in the TCRC in 2000 and the abovementioned environmental factor data,a random forest regression algorithm-based population spatial distribution model was constructed.Its determination coefficient(R²)is 0.81.In 88.4%of the counties(districts),the relative errors of the model predictions were less than 50%.(3)From 1776 to 1953,the total population in the study area showed an uptrend.Prior to 1851,the population increased mainly in the Yangtze River Delta.During this period,the number of grid cells in which the population densities were greater than 500 persons per km² increased from 292 to 683.From 1851 to 1953,the population increased extensively across the study area.In the North China Plain and the Pearl River Delta,the number of grid cells in which the population densities were greater than 500 persons per km² increased from 36 to 88 and from 4 to 35,respectively.The spatial clustering pattern of the population distribution varied temporally.The potential reasons included the shifts in economic development hot spots,traditional beliefs,wars,famine,and immigration policies.(4)Between our reconstructions and the HYDE dataset,there are large differences in the data sources,selected environmental factors and modeling methods.As a consequence,in comparison to our reconstructions,there were fewer populations in the eastern area and more populations in the western area from 1776 to 1851 and more populations in urban areas and fewer populations in rural areas after 1851 in the HYDE dataset.     

利用端元光谱内插的青海植被覆盖度估算研究

针对利用像元二分模型估算植被覆盖度的精度不高的问题,该文基于OSAVI,提出了选定模型参数(OSAVIs和OSAVIv)的方法,并将该方法应用于青海省植被覆盖度估算。该方法通过高分辨率影像在研究区内选取纯裸地和纯植被样点,并将纯裸地样点的OSAVI作为纯裸地样点像元的OSAVIs,将纯植被样点的OSAVI作为纯植被样点像元的OSAVIv,利用样点像元的OSAVIs和OSAVIv值,通过普通克里金内插法,求得研究区每个像元对应的OSAVIs和OSAVIv。经精度验证结果表明:此方法较常规的参数选取方法,RMSE由0.170降至0.156,MAE由0.137降至0.124。经进一步分析表明,此方法对边缘验证点和非边缘验证点的估算精度都有所提高,由于配准误差和周围地表漫反射的影响,边缘验证点的估算精度低于对非边缘验证点的估算精度。     

GNSS+SINS组合导航地固系高度阻尼算法

GNSS+SINS组合导航在地固系中计算有诸多优点,但GNSS信号缺失时的高度阻尼比较复杂。本文从空间直角坐标系与大地坐标系的关系出发,结合地固系捷联惯导的导航方程,提出了一种地固系高度阻尼算法。经仿真测试证明,应用此算法在地固系高度阻尼,可以达到与导航系相同的效果,证明了算法的有效性。     

A real-time inertial-aided cycle slip detection method based on ARIMA-GARCH model for inaccurate lever arm conditions

GPS Solutions - The GPS satellite transmitter antenna phase center offsets (PCOs) can be estimated in a global adjustment by constraining the ground station coordinates to the current International...     

地基合成孔径雷达技术研究与初步应用

阐述了地基合成孔径雷达测量的技术原理和应用方向,归纳了地基雷达形变测量的主要技术流程.通过实地测试验证其精度,地基合成孔径雷达技术具备探测毫米-亚毫米级形变信息的能力,地基雷达设备稳定可靠,具有广泛的应用前景.最后揭示地基合成孔径雷达技术在变形监测及预警中的问题,同时提出下一步的工作安排.