Jurassic Tectonics of North China: A Synthetic View

This paper gives a synthetic view on the Jurassic tectonics of North China, with an attempt to propose a framework for the stepwise tectonic evolution history. Jurassic sedimentation, deformation and magmatism in North China have been divided into three stages. The earliest Jurassic is marked by a period of magmatism quiescence （in 205-190 Ma） and regional uplift, which are considered to be the continuation of the “Indosinian movement” characterized by continent-continent collision between the North and South China blocks. The Early to Middle Jurassic （in 190-170 Ma） was predominated by weak lithospheric extension expressed by mantle-derived plutonism and volcanism along the Yanshan belt and alongside the Tan-Lu fault zone, normal faulting and graben formation along the Yinshan- Yanshan tectonic belt, depression and resuming of coal-bearing sedimentation in vast regions of the North China block （NCB）. The Middle to Late Jurassic stage started at 165y.5 Ma and ended up before 136 Ma; it was dominated by intensive intraplate deformation resulting from multi-directional compressions. Two major deformation events have been identified. One is marked by stratigraphic unconformity beneath the thick Upper Jurassic molasic series in the foreland zones of the western Ordos thrust-fold belt and along the Yinshan-Yanshan belt; it was predated 160 Ma. The other one is indicated by stratigraphic unconformity at the base of the Lower Cretaceous and predated 135 Ma. During this last stage, two latitudinal tectonic belts, the Yinshan-Yanshan belt in the north and the Qinling-Dabie belt in the south, and the western margin of the Ordos basin were all activated by thrusting; the NCB itself was deformed by the NE to NNE-trending structural system involving thrusting, associated folding and sinistral strike-slip faulting, which were spatially partitioned. Foliated S-type granitic plutons aged 160-150 Ma were massively emplaced in the Jiao-Liao massif east of the Tan-Lu fault zone and indicate important crustal thicken     

ArcGIS与AutoCAD结合在1：50000数据库更新工程中的应用

由于GIS软件平台与CAD软件平台各自具有的优势不一样,如何把ArcGIS和AutoCAD相结合,利用各自优势,快速有效地进行地形图数据库内业编辑、数据分析;本文重点讨论了GIS和CAD数据交换的问题。     

基于最小二乘配置的三维空间坐标转换

在求解未知转换参数时,鉴于公共点坐标本身的误差,提出利用最小二乘配置法进行空间坐标转换,即将公共点本身坐标作为随机参数,把转换参数作为非随机参数进行处理,最后通过实验对比分析表明,该方法明显优于一般坐标转换方法。     

隧道围岩强度不均地段塌方成因及其处理方法

由于地质构造作用以及风化作用,工程场地岩体中多存在围岩强度不均地段.在隧道施工过程中就经常遇到软硬岩石交汇而形成的地质条件复杂地段;给隧道的施工带来了很多不利情况,并且也是导致隧道塌方的原因之一.2006年1月,承德韩郭线二级公路工程,喇嘛梁隧道软硬岩石交汇地段由于地下水作用导致围岩风化程度不均,产生软弱结构面并造成了大面积塌方.基于现场的追踪调查与考察,本文详细描述了利用拱顶架设工字钢梁并配合超前注浆小导管的支护方法来处理这类围岩.     

Response of riparian vegetation to water-table changes in the lower reaches of Tarim River, Xinjiang Uygur, China

The lower reaches of Tarim River in the Xinjiang Uygur region of western China had been dried out for more than 30 years before water began to be diverted from Konqi (Peacock) River via a 927-km-long channel in year 2000, aimed at improving the riparian ecological systems. Since then, eight intermittent water deliveries have been carried out. To evaluate the response of riparian vegetation to these operations, the groundwater regime and vegetation changes have been monitored along the 350-km-long stem of the river using a network of 40 dug wells at nine transects across the river and 30 vegetation plots at key sites. Results show that the water table rose remarkably, i.e. from a depth of 9.87 m before the water delivery to 3.16 m after the third water delivery. The lateral distance of affected water table extended to 1,050 m from the riverbank after the fourth water delivery. The riparian vegetation has changed in composition, type, distribution, and growing behavior. This shows that the water deliveries have had significant effects on restoration of riparian ecosystems.     

数字化测图中指向箭头的设计

提出在数字化测图的外业编码数据采集过程中,对于未能连线的方向给与一个指向箭头,以便于在内业的地形图编辑中,根据指向箭头进行连线,提高连线率,减小外业作图工作量,提高工作效率。     

有限元法模拟开挖引起的基坑水平位移和邻近建筑物沉降

以徐州某采用水泥土墙支护的基坑为例,采用有限元数值模拟的方法,对基坑开挖引起的水平位移量和邻近建筑物沉降量进行了计算,并与实际监测值进行了对比分析,得到了一些关于如何控制基坑水平位移和减少基坑周边建筑沉降的结论。     

上海市长江口及邻近海域地质调查现状及展望

海洋区域地质调查近年来逐渐得到重视,海洋地质调查技术的发展也为开展海洋区域地质调查奠定了基础。上海地区社会经济发展对地质工作的需求,为摸清上海市长江口及邻近海域的地质现状提出了必然要求。本文在系统整理长江口及邻近海域地质资料的基础上,重点分析了区内存在的重点地质问题和研究存在的问题,根据海洋地质调查的技术发展,结合国内相关地区的调查经验,对长江口及邻近海域内区域地质调查进行了展望,提出了采用综合物探技术、地质取样和测试分析进行综合地质环境调查的建议,并对具体采用的调查技术和调查内容进行了论述。     

内蒙古桌子山煤田火区特征及灭火方法探讨

内蒙古自治区桌子山煤田赋存着较为稀缺的煤种一焦煤,煤田内存在的火区不仪烧掉了宝贵的焦性煤炭资源,给煤矿生产带来严重的事故隐患,对当地生态环境也造成极大的破坏。经查明区内有26处子火区,分布面积约760万m^2,通过煤田地质特征、煤质特征、地表指示特征、同位素氡气的浓度相对分布特征、物性特征分析了区内煤层发火原因,根据桌子山煤田火区特点,建议采用浅剥、深灌与覆盖相结合的灭火方法,并对火区进行动态监测。     

贵州省大方县五凤井田水文地质特征初探

五风井田位于贵州省大方县城东侧,面积89.22km^2,含煤地层为二叠系上统龙潭组,主要可采煤层为6中、26、33号煤层,煤炭总资源量26 130万t。井田内主要含水层为三叠系茅草铺组岩溶溶洞含水层（T1m）,夜郎组玉龙山灰岩岩溶裂隙含水层T1y2）,二叠系中统长兴组岩溶裂隙含水层（P3c）、茅口组岩溶溶洞-暗河含水层（P2m）。矿床属于以岩溶充水为主,水文地质条件中等的矿床。井田的充水水源为地表水、地下水和小煤矿、采空区的老窑积水,充水通道为断裂破碎带及采矿冒落裂隙带。