基于区域生长法和变差函数的PolSAR影像山脊线提取

山脊线通常是地震引发的山地灾害的起始部位。在监测此类山地灾害时,需要明确山脊线所处位置,从而为制定出相关预防措施提供支持。根据实际经验,由于合成孔径雷达(Synthetic Aperture Radar,SAR)的成像特殊性,在检测含建筑物的全极化SAR(Polarimetric Synthetic Aperture Radar,PolSAR)影像山脊线时,往往受到高散射强度的建筑物干扰,从而出现误判。针对PolSAR影像中山脊线受到建筑物干扰出现误识的问题,提出一种结合区域生长法和变差函数的识别方法。在识别过程中,首先,对采集的PolSAR影像通过区域生长法进行分割处理,再通过模糊C均值(Fuzzy C-Means,FCM)分类方法对变差纹理等特征进行聚类分析,并进行相似度判断,获取建筑物区域,在此基础上,对比建筑物、山脊线的混分成分,进而提取山脊线。通过对该方法进行实验对比分析,发现其相较于阈值分割方法提取精度有明显提高,可以为PolSAR影像中山脊线识别提供一种新思路。     

招平断裂带中段断裂成矿有利度分析

招平断裂带是我国著名的金矿成矿带。断裂的空间展布形态特征对寻找断裂构造控矿型金矿床具有重要作用。通过断裂的遥感解译,研究了招平断裂带主断裂的走向、主断裂地表破碎带宽度以及主断裂起伏程度等成矿有利度指标,构建了基于断裂距离场的成矿有利度分析模型,并圈定研究区域成矿远景区11处,为区域地质、物化探等勘查工作提供了指导性意见。     

A Finite Layer Formulation for Groundwater Flow to Horizontal Wells

A finite layer approach for the general problem of three‐dimensional (3D) flow to horizontal wells in multilayered aquifer systems is presented, in which the unconfined flow can be taken into account. The flow is approximated by an integration of the standard finite element method in vertical direction and the analytical techniques in the other spatial directions. Because only the vertical discretization is involved, the horizontal wells can be completely contained in one specific nodal plane without discretization. Moreover, due to the analytical eigenfunctions introduced in the formulation, the weighted residual equations can be decoupled, and the formulas for the global matrices and flow vector corresponding to horizontal wells can be obtained explicitly. Consequently, the bandwidth of the global matrices and computational cost rising from 3D analysis can be significantly reduced. Two comparisons to the existing solutions are made to verify the validity of the formulation, including transient flow to horizontal wells in confined and unconfined aquifers. Furthermore, an additional numerical application to horizontal wells in three‐layered systems is presented to demonstrate the applicability of the present method in modeling flow in more complex aquifer systems.     

地形对大地电磁测深(MTS)资料的影响

地形影响是山区ＭＴＳ工作的主要问题之一，对此做了理论分析并用均匀半空间表面二维地形模型进行了数值模拟。结果表明，地形影响不仅与ＭＴＳ资料的种类、极化模式、场源电磁波周期及测点位置有关，而且还依赖于不同的地形形态和尺度。此外，还根据悬崖模型计算，给出了关于地形影响范围的估     

江西相山铀矿田地貌剥蚀特征及其控矿意义——磷灰石裂变径迹证据

本文以数字高程(DEM)地貌特征分析为基础,采用磷灰石裂变径迹测试和温度-时间反演模拟研究,分析江西相山铀矿田铀成矿后剥蚀程度的差异性,结合已知矿床的成矿特征,探讨地貌剥蚀程度与矿体保存之间的关系,为区域找矿提供指导.通过DEM合成图像和水系分布特征,表明相山铀矿田是一个遭受中等侵蚀的地貌区,相山主峰南北和东西侧地貌侵蚀差异特征明显.统计分析表明,已经发现的铀矿床、点的分布与次级火山机构关系密切,相山南部的次火山机构剥蚀较深,西部次火山机构剥蚀相对弱,而北部和西北部则处于中等剥蚀程度.磷灰石裂变径迹测试结果表明,相山铀矿田的南部和东部开始剥蚀的时间早于西部,但晚于相山主峰的剥蚀.利用磷灰石的裂变径迹长度和温度参数,进一步开展了温度-时间的反演模拟研究,结果显示相山西部快速隆升发生于40~60 Ma之间,相山南部和东部的快速隆升发生于60~75 Ma之间,相山主峰的快速隆升发生于75~100 Ma之间,表明相山主峰、相山东部及南部较西部经历了较长时间的剥蚀.结合现今区域地质体出露特征及铀矿化蚀变类型的空间展布规律、成矿深度的估算等,推测相山铀矿田东部和南部剥蚀程度较深,早期可能形成的中低温铀矿体被剥蚀殆尽;北部剥蚀程度中等,地表出露了形成深度稍深的碱交代蚀变矿床;而西部剥蚀程度较低,地表发育浅部低温成矿的酸交代蚀变铀矿床.据此推断,相山铀矿田的西部深部具有很好的找矿潜力.     

北大西洋高纬度海区湍流热通量对全球增暖的响应

大西洋经向翻转环流(the Atlantic Meridional Overturning Circulation,AMOC)由低纬输送大量热量至高纬度北大西洋海区,并通过热通量由海洋输送给大气,主导了附近区域的气候形态,并对北半球尺度的气候变化产生显著影响。本文根据CMIP5多模式多增暖情景的预估模拟结果,通过与增暖前控制试验的对比发现,全球增暖可导致该海区湍流热通量的减小,且减小的幅度随增暖强度增大,模拟结果与观测一致。进一步研究发现,热通量的减小存在季节差异,冬季的减小幅度远大于夏季。结合淡水扰动试验的分析表明,全球增暖下AMOC强度的减弱导致大西洋经向热输送减少,进而导致高纬度北大西洋海洋向大气的热输送减小。     

Computational model coupling mode II discrete fracture propagation with continuum damage zone evolution

We propose a numerical method that couples a cohesive zone model (CZM) and a finite element‐based continuum damage mechanics (CDM) model. The CZM represents a mode II macro‐fracture, and CDM finite elements (FE) represent the damage zone of the CZM. The coupled CZM/CDM model can capture the flow of energy that takes place between the bulk material that forms the matrix and the macroscopic fracture surfaces. The CDM model, which does not account for micro‐crack interaction, is calibrated against triaxial compression tests performed on Bakken shale, so as to reproduce the stress/strain curve before the failure peak. Based on a comparison with Kachanov's micro‐mechanical model, we confirm that the critical micro‐crack density value equal to 0.3 reflects the point at which crack interaction cannot be neglected. The CZM is assigned a pure mode II cohesive law that accounts for the dependence of the shear strength and energy release rate on confining pressure. The cohesive shear strength of the CZM is calibrated by calculating the shear stress necessary to reach a CDM damage of 0.3 during a direct shear test. We find that the shear cohesive strength of the CZM depends linearly on the confining pressure. Triaxial compression tests are simulated, in which the shale sample is modeled as an FE CDM continuum that contains a predefined thin cohesive zone representing the idealized shear fracture plane. The shear energy release rate of the CZM is fitted in order to match to the post‐peak stress/strain curves obtained during experimental tests performed on Bakken shale. We find that the energy release rate depends linearly on the shear cohesive strength. We then use the calibrated shale rheology to simulate the propagation of a meter‐scale mode II fracture. Under low confining pressure, the macroscopic crack (CZM) and its damaged zone (CDM) propagate simultaneously (i.e., during the same loading increments). Under high confining pressure, the fracture propagates in slip‐friction, that is, the debonding of the cohesive zone alternates with the propagation of continuum damage. The computational method is applicable to a range of geological injection problems including hydraulic fracturing and fluid storage and should be further enhanced by the addition of mode I and mixed mode (I+II+III) propagation. Copyright © 2016 John Wiley & Sons, Ltd.     

阿拉善高原古湖岸堤释光测年与晚第四纪湖面变化

阿拉善高原位于现代西风环流与东亚季风环流过渡带,该地区分布的湖泊对全球性气候变化响应极为敏感,阿拉善高原广泛分布的古湖岸堤为较准确地重建晚第四纪湖泊水位变化提供了良好载体。近年对黑河、石羊河尾闾湖泊以及吉兰泰盐池、雅布赖盆地等地的古湖岸堤的沉积地层以及石英和钾长石释光测年研究,重建了不同区域较高分辨率的末次间冰期以来湖泊时空演化过程。发现早在300 ka以前阿拉善高原就已经形成了高水位湖泊,黑河尾闾额济纳盆地在MIS 11或更早、MIS 9、MIS 7、MIS 5和MIS 1形成了高湖面湖泊,高湖面湖泊形成存在100 ka的周期。阿拉善高原在末次间冰期及全新世形成了稳定高湖面湖泊,但间冰期内部湖面波动具有空间差异性,东部区域湖泊高湖面出现在MIS 5e~5c和中全新世,西部湖泊高湖面出现在MIS 5a~5c和晚全新世。湖面变化的空间差异性很可能与冰期-间冰期旋回尺度及间冰期内部东亚夏季风与西风气候系统在阿拉善高原的相互作用密切相关。

     

重复航空摄影测量方法在乌鲁木齐河流域冰川变化监测中的应用

介绍重复航空摄影测量对比成图方法在监测乌鲁木齐河流域冰川规模和形态要素变化中的应用，以及成图过程中对控制加密和精度等问题的处理。检验表明，航空摄影测量对比成图方法能较准确地量测冰川长度、面积和储量等全形态要素的变化量，可以用于区域冰川变化的监测研究。测量资料表明，１９６４～１９９２年间，乌鲁木齐河流域１５５条冰川的规模均在缩小，冰川末端平均后退率为１２．４％，面积平均缩小率为１３．８％，冰储量减少１５．５％。