山西大同市农村民居震害特征及防震对策

1989年10月18日山西大同-阳高发生了6.1级地震,在这次地震中,倒塌房屋31 348间,其中,倒塌的大部分是土窑洞.可见,减轻地震灾害的关键是提高建筑物的抗震性能.     

Ruthenium-ion-catalyzed oxidation of asphaltenes and oil-source correlation of heavy oils from the Lunnan and Tahe oilfields in the Tarim Basin, NW China

The identification of marine source rocks in the Tarim Basin is debated vigorously. The intention of this paper is to investigate the asphahenes in heavy oils from the Lunnan and Tabe oilfields and Well TD2 with ruthenium-ions-catalyzed oxidation technique (RICO), in order to explore its role in oil-oil and oil-source correlations, The RICO products included n-alkanoic acids, α,ω-di-n-alkanoic acids, branched alkanoic acids, tricyclic terpanoic acids, hopanoic acids, gammacerane carboxylic acid , regular sterane carboxylic acids and 4-methylsterane carboxylic acids. The n-alkyl chains and biomarkers bounded on the asphaltenes were of unsusceptibility to biodegradation. The distribution and absolute concentrations of n-alkanoic acids in the RICO products of heavy oils from the Lunnan and Tabe oilfields are different from those of Well TD2. The biomarkers bounded on the asphahenes, especially steranes, have a distribution trend similar to that of the counterparts in saturates. The sterane carboxylic acids and 4-methylsterane carboxylic acids in the RICO products of heavy oils from the Lunnan and Tahe oilfields, dominated by C30 sterane and C31 4-methylsterane carboxylic acids, respectively, are significantly different from those of the heavy oils of Well TD2, whose dominating sterane and 4-methylsterane carboxylic acids are C28 sterane and C29 4-methylsterane acids, respectively. The RICO products of the asphaltenes further indicate that the Middle-Upper Ordovician may be the main source rocks for heavy oils from the Lunnan and Tabe oilfields.     

Climatic response of thick leaf spruce (Picea crassifolia) tree-ring width at different elevations over Qilian Mountains, northwestern China

Tree-ring cores of thick leaf spruce (Picea crassifolia) taken from four sites at different elevations, in the middle of the Qilian Mountains, in the arid and semi-arid region of northwestern China, were used to develop four tree-ring width chronologies using standard dendrochronological methods. Results indicate that with increasing altitude the chronologies’ year-to-year variations decreased. Hence, the sensitivity of the tree-ring chronologies to climate decreases with altitude. Further analysis showed that the significant limiting factor on tree growth is spring precipitation. Measurements of stomata density and leaf dry weight suggest the species’ ecological adaptation strategy changes with elevation. At high elevation the metabolic rate of thick leaf spruce decreases, thus showing the effect of the climate.     

云南沿边境地带生态环境3S监测、 评价与调控研究

本文利用全球新千年整体生态系统评估的理论，以云南省沿边境地带生态系统变化跨境生态安全为研究对象，探寻并揭示我国陆疆系统的跨境生态系统变化监测、评价和生态安全综合调控的基础理论与信息机理；进而研究基于“3S”云南沿边境地带的生态环境监测、评价与综合调控的方法和关键技术，包括方法和技术体系的建立、指标体系的建立、多尺度效应和尺度转换、数学模型的建立、综合调控模式和决策方案的建立等；在案例研究部分，建立了背景数据库，然后选择大、中、小尺度进行了全区生态环境现状评价，重点河道、典型路段和重点口岸的影响评价和预测预报研究，最后进行了综合调控模式和方案的探讨，并对研究结果进行了动态仿真和虚拟表达研究。     

古尔班通古特沙漠生物结皮的分布特征

新疆古尔班通古特沙漠是我国最大的固定和半固定沙漠，其间广泛发育着以地衣植物为主的生物结皮，是除种子植物以外的固定沙面的重要生物因子。研究表明，选择适当的时段，应用遥感技术并结合地面调查来研究沙漠生物结皮的空间分布格局是可行的，遥感制图与地面调查的结果基本一致。该沙漠南部是生物结皮最为丰富的区域，各种类型的生物结皮均有充分发育，呈连续分布，但其分布模式向北、向西和向东变得破碎。通过统计生物结皮像元的面积，得到生物结皮覆盖率超过33％的像元面积占研究区总面积的28．7％。生物结皮的分布对地貌部位有较强的选择性，生物结皮的不同发育阶段种类组成亦有较大的差别。     

Refined modeling and movement characteristics analyses of irregularly shaped particles

Irregularly shaped (IRS) particles widely exist in many engineering and industrial fields. The macro physical and mechanical properties of the particle system are governed by the interaction between the particles in the system. The interaction between IRS particles is more complicated because of their complex geometric shape with extremely irregular and co‐existed concave and convex surfaces. These particles may interlock each other, making the sliding and friction of IRS particles more complex than that of particles with regular shape. In order to study the interaction of IRS particles more efficiently, a refined method of constructing discrete element model based on computed tomography scanning of IRS particles is proposed. Three parameters were introduced to control the accuracy and the number of packing spheres. Subsequently, the inertia tensor of the IRS particle model was optimized. Finally, laboratory and numerical open bottom cylinder tests were carried out to verify the refined modeling method. The influence of particle shape, particle position, and mesoscopic friction coefficient on the interaction of particles was also simulated. It is noteworthy that with the increase of mesoscopic friction coefficient, the fluidity of IRS particle assembly decreases, and intermittent limit equilibrium state may appear. Copyright © 2014 John Wiley & Sons, Ltd.     

Computational model coupling mode II discrete fracture propagation with continuum damage zone evolution

We propose a numerical method that couples a cohesive zone model (CZM) and a finite element‐based continuum damage mechanics (CDM) model. The CZM represents a mode II macro‐fracture, and CDM finite elements (FE) represent the damage zone of the CZM. The coupled CZM/CDM model can capture the flow of energy that takes place between the bulk material that forms the matrix and the macroscopic fracture surfaces. The CDM model, which does not account for micro‐crack interaction, is calibrated against triaxial compression tests performed on Bakken shale, so as to reproduce the stress/strain curve before the failure peak. Based on a comparison with Kachanov's micro‐mechanical model, we confirm that the critical micro‐crack density value equal to 0.3 reflects the point at which crack interaction cannot be neglected. The CZM is assigned a pure mode II cohesive law that accounts for the dependence of the shear strength and energy release rate on confining pressure. The cohesive shear strength of the CZM is calibrated by calculating the shear stress necessary to reach a CDM damage of 0.3 during a direct shear test. We find that the shear cohesive strength of the CZM depends linearly on the confining pressure. Triaxial compression tests are simulated, in which the shale sample is modeled as an FE CDM continuum that contains a predefined thin cohesive zone representing the idealized shear fracture plane. The shear energy release rate of the CZM is fitted in order to match to the post‐peak stress/strain curves obtained during experimental tests performed on Bakken shale. We find that the energy release rate depends linearly on the shear cohesive strength. We then use the calibrated shale rheology to simulate the propagation of a meter‐scale mode II fracture. Under low confining pressure, the macroscopic crack (CZM) and its damaged zone (CDM) propagate simultaneously (i.e., during the same loading increments). Under high confining pressure, the fracture propagates in slip‐friction, that is, the debonding of the cohesive zone alternates with the propagation of continuum damage. The computational method is applicable to a range of geological injection problems including hydraulic fracturing and fluid storage and should be further enhanced by the addition of mode I and mixed mode (I+II+III) propagation. Copyright © 2016 John Wiley & Sons, Ltd.     

Quantifying the impact of landscape changes on hydrological variables in the alpine and cold region using hydrological model and remote sensing data

Quantifying the impact of landscape on hydrological variables is essential for the sustainable development of water resources. Understanding how landscape changes influence hydrological variables will greatly enhance the understanding of hydrological processes. Important vegetation parameters are considered in this study by using remote sensing data and VIC-CAS model to analyse the impact of landscape changes on hydrology in upper reaches of the Shule River Basin (URSLB). The results show there are differences in the runoff generation of landscape both in space and time. With increasing altitude, the runoff yields increased, with approximately 79.9% of the total runoff generated in the high mountains (4200–5900 m), and mainly consumed in the mid-low mountain region. Glacier landscape produced the largest runoff yields (24.9% of the total runoff), followed by low-coverage grassland (LG; 22.5%), alpine cold desert (AL; 19.6%), mid-coverage grassland (MG; 15.6%), bare land (12.5%), high-coverage grassland (HG; 4.5%) and shrubbery (0.4%). The relative capacity of runoff generation by landscapes, from high to low, was the glaciers, AL, LG, HG, MG, shrubbery and bare land. Furthermore, changes in landscapes cause hydrological variables changes, including evapotranspiration, runoff and baseflow. The study revealed that HG, MG, and bare land have a positive impact on evapotranspiration and a negative impact on runoff and baseflow, whereas AL and LG have a positive impact on runoff and baseflow and a negative impact on evapotranspiration. In contrast, glaciers have a positive impact on runoff. After the simulation in four vegetation scenarios, we concluded that the runoff regulation ability of grassland is greater than that of bare land. The grassland landscape is essential since it reduced the flood peak and conserved the soil and water.     

δ18O and δ13C in fossil shells of Radix sp. from the sediment succession of a dammed palaeo‐lake in the Yarlung Tsangpo valley,Tibet, China

A series of confirmed and suspected dammed palaeo‐lake sedimentary successions is scattered within the middle Yarlung Tsangpo valley in Tibet. However, the chronology, the genesis of the dam and its location, the water level of the dammed lake, the process of dam failure and the spatiotemporal relationships between the sedimentary successions remain controversial. Here, we focus on one sedimentary succession of the suspected dammed palaeo‐lake at Xigazê. We measured the grain‐size distribution, magnetic susceptibility, organic and inorganic carbon content, and δ¹³C_org and δ¹⁵N_total ratios of the sediments. In addition, we measured the δ¹⁸O_shell and δ¹³C_shell values of modern and fossil Radix sp. shells, and the δ¹⁸O_water and δ¹³C_DIC values of the ambient water with different hydrological regimes. The results indicate that the δ¹⁸O_shell values of modern Radix sp. and the δ¹⁸O_water of the ambient water body significantly depend on its hydrological status. In addition, a strong positive relationship was observed between δ¹⁸O_shell values of modern Radix sp. shells and the δ¹⁸O_water of the ambient water on the Tibetan Plateau. According to this correlation, the δ¹⁸O_water values of the palaeo‐water body are reconstructed using the δ¹⁸O_shell values of Radix sp. fossil shells in the Xigazê section. Further, based on the δ¹⁸O_shell values of fossil Radix sp., the reconstructed δ¹⁸O_water of the palaeo‐water body and the specific habitats of Radix sp., we infer that the sedimentary succession in the Xigazê broad valley was mainly formed within the backwater terminal zone of a dammed palaeo‐lake and that the elevation of the water level of the lake was approximately 3811 m a.s.l. AMS ¹⁴C dating indicates that the deposits of the dammed palaeo‐lake were formed at about 33–22 cal. ka BP. Finally, the presence of Radix sp. fossil shells within the Xigazê section suggests that Radix sp. survived the late Last Glacial Period on the Tibetan Plateau.