Discussion on applying an analytical method to optimize the anti-freeze design parameters for underground water pipelines in seasonally frozen areas

Adopting the quasi-three-dimensional (Quasi-3D) numerical method to optimize the anti-freeze design parameters of an underground pipeline usually involves heavy numerical calculations. Here, the fitting formulae between the safe conveyance distance (SCD) of a water pipeline and six influencing factors are established based on the lowest water temperature (LWT) along the pipeline axis direction. With reference to the current widely used anti-freeze design approaches for underground pipelines in seasonally frozen areas, this paper first analyzes the feasibility of applying the maximum frozen penetration (MFP) instead of the mean annual ground surface temperature (MAGST) and soil water content (SWC) to calculate the SCD. The results show that the SCD depends on the buried depth if the MFP is fixed and the variation of the MAGST and SWC combination does not significantly change the SCD. A comprehensive formula for the SCD is established based on the relationships between the SCD and several primary influencing factors and the interaction among them. This formula involves five easy-to-access parameters: the MFP, buried depth, pipeline diameter, flow velocity, and inlet water temperature. A comparison between the analytical method and the numerical results based on the Quasi-3D method indicates that the two methods are in good agreement overall. The analytic method can be used to optimize the anti-freeze design parameters of underground water pipelines in seasonally frozen areas under the condition of a 1.5 safety coefficient.     

Uncertainty analysis of space–time prisms based on the moment-design method

Space–time prism (STP) is an important concept for the modeling of object movements in space and time. An STP can be conceptualized as the result of the potential path of a moving object revolving around in the three-dimensional space. Though the concept has found applications in time geography, research on the analysis and propagation of uncertainty in STPs, particularly under high degree of nonlinearity, is scanty. Based on the efficiency and effectiveness of the moment-design (M-D) method, this paper proposes an approach to deal with nonlinear error propagation problems in the potential path areas (PPAs) of STPs and their intersections. Propagation of errors to the PPA and its boundary, and to the intersection of two PPAs is investigated. Performance of the proposed method is evaluated via a series of experimental studies. In comparison with the Monte Carlo method and the implicit function method, simulation results show the advantages of the M-D method in the analysis of error propagation in STPs.     

Influence of urban expansion on the urban heat island effect in Shanghai

The urban heat island (UHI) effect resulting from rapid urbanization is attracting increasing attention among the global scientific community. This research analyzed the relationship between urban expansion and the UHI effect utilizing an integrated approach, including urban land interpretation and retrieving land surface temperature based on remote sensing, and spatial overlay analysis for revealing the relationship for different time periods between 1984 and 2014 in Shanghai, China. The results show that (1) the spatiotemporal changes in UHI are consistent with the expansion of urban land, and rapid urban expansion leads to an expansion of the UHI, in particular along roadways. (2) The mode of urban expansion is an important factor influencing the UHI effect. Urban sprawl (urban expansion in the edge-expansion way) is a form of typical expansion that leads to the rapid increase in the UHI. When the urban compactness ratio is less than 0.15, a compact design can effectively control the expansion rate of the UHI and mitigate its range of influence and intensity. However, when the urban compactness ratio is greater than 0.15, the urban design has a marked influence on the UHI ratio index: a more compact form produces a stronger UHI effect. So, finding an equilibrium between urban compactness ratio and urban expansion rate is good for effective urban management and planning.     

Effects of experimental warming on soil microbial communities in two contrasting subalpine forest ecosystems,eastern Tibetan Plateau,China

Soil microbial communities are primarily regulated by environmental temperature. Our study investigated the effects of global warming on soil microbial community composition as measured via phospholipid fatty acid (PLFA) analysis and soil chemical characteristics in relation to soil depth in a dragon spruce plantation and a spruce-fir-dominated natural forestin the Eastern Tibetan Plateau. Open-top chambers were utilized to increase the soil and air temperature. Soil samples were collected from the 0-10 cm, 10-20 cm, and 20-30 cm layers after a 4-year warming. Our results showed that the soil microbial community and the contents of TC (Total carbon), TN (Total nitrogen), NO ₃ ^- , and NH ₄ ⁺ responded differently to warming in the two contrasting forests, especially at the 0-10 cm soil depth. Warming increased soil microbial biomass at the 0-20 cm depth of soil in natural forest but reduced it at the 0-10 cm depth ofsoil in the plantation. In contrast, the TC and TN contents were reduced in most soil layers of a natural forest but increased in all of the soil layers of the plantation under warming conditions. This result suggested that the effects of warming on soil microbial community and soil C and N pools would differ according to soil depth and forest types; thus, the two contrasting forests would under go differing changes following the future climate warming in this region.     

Characteristics of viscous debris flow in a drainage channel with an energy dissipation structure

A new type of drainage channel with an energy dissipation structure has been proposed based on previous engineering experiences and practical requirements for hazard mitigation in earthquakeaffected areas. Experimental studies were performed to determine the characteristics of viscous debris flow in a drainage channel of this type with a slope of 15%. The velocity and depth of the viscous debris flow were measured, processed, and subsequently used to characterize the viscous debris flow in the drainage channel. Observations of this experiment showed that the surface of the viscous debris flow in a smooth drainage channel was smoother than that of a similar debris flow passing through the energy dissipation section in a channel of the new type studied here. However, the flow patterns in the two types of channels were similar at other points. These experimental results show that the depth of the viscous debris flow downstream of the energy dissipation structure increased gradually with the length of the energy dissipation structure. In addition, in the smooth channel, the viscous debris-flow velocity downstream of the energy dissipation structure decreased gradually with the length of the energy dissipation structure. Furthermore, the viscous debris-flow depth and velocity were slightly affected by variations in the width of the energy dissipation structure when the channel slope was 15%. Finally, the energy dissipation ratio increased gradually as the length and width of the energy dissipation structure increased; the maximum energy dissipation ratio observed was 62.9% (where B = 0.6 m and L/w = 6.0).     

Size distributions and source function of sea spray aerosol over the South China Sea

The number concentrations in the radius range of 0.06 – 5 μm of aerosol particles and meteorological parameters were measured on board during a cruise in the South China Sea from August 25 to October 12, 2012. Effective fluxes in the reference height of 10 m were estimated by steady state dry deposition method based on the observed data, and the influences of different air masses on flux were discussed in this paper. The number size distribution was characterized by a bimodal mode, with the average total number concentration of(1.50 ± 0.76)×10~3 cm~(-3). The two mode radii were 0.099 μm and 0.886 μm, both of which were within the scope of accumulation mode. A typical daily average size distribution was compared with that measured in the Bay of Bengal. In the whole radius range, the number concentrations were in agreement with each other; the modes were more distinct in this study than that abtained in the Bay of Bengal. The size distribution of the fluxes was fitted with the sum of log-normal and power-law distribution. The impact of different air masses was mainly on flux magnitude, rather than the shape of spectral distribution. A semiempirical source function that is applicable in the radius range of 0.06 μmr_(80)0.3 μm with the wind speed varying from 1.00 m s~(-1) to 10.00 m s~(-1) was derived.     

Study on biogenic amines in various dry salted fish consumed in China

This study was carried out to investigate the biogenic amines（BAs）, physicochemical property and microorganisms in dry salted fish, a traditional aquatic food consumed in China. Forty three samples of dry salted fish were gathered from retail and wholesale markets and manufacturers, which had been produced in various regions in China. Cadaverine（CAD） and putrescine（PUT） were quantitatively the most common biogenic amines. About 14% of the samples exceeded the histamine content standards established by the FDA and/or EU. The highest histamine content was found in Silver pomfret（Pampus argenteus）(347.79 mg kg^-1). Five of forty three samples exceeded the acceptable content of TYR(100 mg kg^-1), and 23.26% of dried-salted fish contained high contents of biogenic amines(above 600 mg kg^-1). In addition, species, regions, pickling processes and drying methods made the physicochemical property, microorganisms and biogenic amines in dry salted fish to be different to some extents. The total plate count（TPC） was much higher than that of total halophilic bacteria in all samples. The biogenic amines, physicochemical property and microbiological counts exhibited large variations among samples. Furthermore, no significant correlation between biogenic amines and physicochemical property and TPC was observed. This study indicated that dry salted fish may still present healthy risk for BAs, depending on the processing methods, storage conditions among others.     

新疆额尔宾山花岗岩侵位年龄和成因及其对南天山洋闭合时代的限定

额尔宾山花岗岩岩体位于南天山晚古生代侵入岩带,对该花岗岩进行锆石U-Pb定年获得296.1±1.8Ma的年龄,为早二叠世。岩石主量元素分析结果表明,该花岗岩的Si O2含量为66.96%~67.3%,富碱(Na2O+K2O=7.53%~7.97%),K2O/Na2O1(1.15~1.27),属高钾钙碱性系列岩石;Al2O3为15.56%~15.62%,Al2O3K2O+Na2O+Ca O,属于过铝型。岩石稀土元素配分模式呈现轻稀土元素(LREE)富集((La/Yb)N=27.03~30.62)、重稀土元素(HREE)亏损((LREE/HREE)=18.2~20.1)、具有中等程度的负Eu异常(δEu=0.64~0.68)。微量元素判别结果显示,其具有I-A型花岗岩过渡的特征。结合区域地质背景综合分析,初步认定该岩体可能形成于南天山同碰撞向后碰撞构造体制转换时期,据此可以推测南天山洋盆闭合时限至少应该在早二叠世以前。     

Preparation of iron phosphate from sludge sourced from the electrocoagulation treatment of source-separated urine

In order to prepare iron phosphate by waste sludge, we report a method for effective utilization of the sludge obtained from the electrocoagulation treatment of source-separated urine. The sludge was dissolved with hydrochloric acid and pretreated with H₂O₂ and Na₃PO₄; finally, NaOH was added to precipitate iron phosphate from the solution. Thermal treatment of the precipitate at 750 °C in air yielded crystalline quartz-like anhydrous FePO₄. The precipitate was characterized by a number of thermal techniques such as thermogravimetry/differential thermal analysis, scanning electron microscopy, and X-ray powder diffraction.     

New variogram modeling method using MGGP and SVR

A critical step for kriging in geostatistics is estimation of the variogram. Traditional variogram modeling comprise of the experimental variogram calculation, appropriate variogram model selection and model parameter determination. Selecting of the variogram model and fitting of model parameters is the most controversial aspect of geostatistics. Shapes of valid variogram models are finite, and sometimes, the optimal shape of the model can not be fitted, leading to reduced estimation accuracy. In this paper, a new method is presented to automatically construct a model shape and fit model parameters to experimental variograms using Support Vector Regression (SVR) and Multi-Gene Genetic Programming (MGGP). The proposed method does not require the selection of a variogram model and can directly provide the model shape and parameters of the optimal variogram. The validity of the proposed method is demonstrated in a number of cases.