辉钼矿Re-Os同位素定年方法的改进与应用

公认的Re-Os同位素定年代表物辉钼矿,目前已在金属硫化物矿床年代学研究领域获得了广泛的应用。本研究采用浓HNO₃分解辉钼矿样品,大大地简化了Re和Os的化学制备过程,并根据辉钼矿中正常Os含量水平相对放射成因¹⁸⁷Os可以忽略的特点,以正常Os标准为稀释剂,实现了仪器测量过程中Os同位素质量分馏的在线校正,改善了分析数据的质量。该方法经辉钼矿国家标准物质进行验证,获得了满意的Re、Os含量及Re-Os年龄数据,并且在南岭地区与连阳复式岩体相关的姓坪夕卡岩型钼矿床成矿年龄研究中获得了成功应用。在实际应用中,为了获得有意义的能反映真实地质事件的年龄数据,辉钼矿样品不仅要有足够的取样量,而且还要保证粒度细、混合均匀。     

临沂市开发区土地集约利用评价工作分析

土地集约利用评价成果对增强政府调控土地利用的能力,构建资源节约型社会,促进经济社会可持续发展都具有重要的意义。该文在分析及评价临沂市开发区土地利用现状、结构的基础上,提出了合理化建议,对促进临沂市土地可持续利用具有重要意义。     

赵东油田老平台T型管节点极限承载力弱化规律研究

赵东油田一期建设的导管架平台在长达20年服役期内,长期承受恶劣的海洋环境载荷,将会产生裂纹和腐蚀等缺陷。此类缺陷的出现必然对平台结构,特别是管节点结构的极限承载力产生巨大影响。本文针对赵东油田ODA老平台典型T型管节点结构,通过建立考虑裂纹和腐蚀损伤的管节点非线性有限元模型,研究了管节点上出现的腐蚀和裂纹等损伤对其极限...     

XX盆地低渗储层束缚水饱和度计算方法研究

束缚水饱和度的大小是划分油气层与水层的重要依据之一.在岩石物理实验的基础上,分析影响束缚水饱和度大小的各种因素,利用彼此之间的关系求取束缚水饱和度的大小.以XX盆地低渗储层为例,分析低渗储层束缚水饱和度的特点,建立了束缚水饱和度与孔隙度、渗透率、气柱高度等的模型,应用到实际资料中,检验各种模型的适用性与准确性,取得了较好的效果.     

Effect of copper on the growth of shrimps Litopenaeus vannamei: water parameters and copper budget in a recirculating system

Shrimps( Litopenaeus vannamei) were intensively cultured in a recirculating aquaculture system for 98 days to investigate effects of 0.3 mg/L Cu on its performance, Cu budget, and Cu distribution. Shrimps in Cu-treated systems had greater mean final weight(11.10 vs 10.50 g), body length(107.23 vs 106.42 mm), survival rate(67.80% vs 66.40%), and yield(6.42 vs 5.99 kg/m 3), and lower feed conversion ratio(1.20 vs 1.29) than those in control systems but the differences were not significant. Vibrio numbers remained stable(10 4 –10 6 colony forming units/mL) in the rearing tanks of both control and treated systems. Total ammonium-N, nitrite-N, nitrate-N, pH, chemical oxygen demand, 5-day carbonaceous biochemical oxygen demand, and total suspended solids were similar in controls and treatments. Dissolved Cu concentration in the treated systems decreased from 0.284 to 0.089 mg/L while in the control systems it increased from 0.006 2 to 0.018 mg/L. The main sources of Cu in the treated systems were the artificially added component(75.7% of total input), shrimp feed(21.0%), water(2.06%), and shrimp biomass(1.22%). The major outputs of Cu occurred via the mechanical filter(41.7%), water renewal(15.6%), and draining of the sediment trap(15.1%). The foam fractionator removed only 0.69% of total Cu input. Harvested shrimp biomass accounted for 11.68% of Cu input. The Cu concentration of shrimps in the Cu-treated systems(30.70 mg/kg wet weight) was significantly higher than that in control systems(22.02 mg/kg). Both were below the maximum permissible concentration(50 mg/kg) for Cu in seafood for human consumption in China. Therefore, recirculating systems can be used for commercial on-growing of Litopenaeus vannamei without loss of shrimp quality, even in water polluted by 0.30 mg/L Cu. The mechanical filter is the main route for Cu removal.     

Spatiotemporal filtering of regional GNSS network’s position time series with missing data using principle component analysis

The existing spatiotemporal analysis methods suppose that the involved time series are complete and have the same data interval. However missing data inevitably occur in the position time series of Global Navigation Satellite Systems networks for many reasons. In this paper, we develop a modified principal component analysis to extract the Common Mode Error (CME) from the incomplete position time series. The principle of the proposed method is that a time series can be reproduced from its principle components. The method is equivalent to the method of Dong et al. (J Geophys Res 111:3405–3421, 2006) in case of no missing data in the time series and to the extended ‘stacking’ approach under the assumption of a uniformly spatial response. The new method is first applied to extract the CME from the position time series of the Crustal Movement Observation Network of China (CMONOC) over the period of 1999–2009 where the missing data occur in all stations with the different gaps. The results show that the CMEs are significant in CMONOC. The size of the first principle components for the North, East and Up coordinates are as large as 40, 41 and 37 % of total principle components and their spatial responses are not uniform. The minimum amplitudes of the first eigenvectors are only 41, 15 and 29 % for the North, East and Up coordinate components, respectively. The extracted CMEs of our method are close to the data filling method, and the Root Mean Squared error (RMS) values computed from the differences of maximum CMEs between two methods are only 0.31, 0.52 and 1.55 mm for North, East and Up coordinates, respectively. The RMS of the position time series is greatly reduced after filtering out the CMEs. The accuracies of the reconstructed missing data using the two methods are also comparable. To further comprehensively test the efficiency of our method, the repeated experiments are then carried out by randomly deleting different percentages of data at some stations. The results show that the CMEs can be extracted with high accuracy at the non missing-data epochs. And at the missing-data epochs, the accuracy of extracted CMEs has a strong dependence on the number of stations with missing data.     

浅谈利用Google Earth结合MapGis软件制作地形图方法

利用Google Earth的三维模拟功能,通过不同海拔平面与地表的接触线来获得等高线,结合MapGis的编辑功能即可形成矢量化的地形图。经与实测地形图对比,两者山头、山谷、山脊、鞍部、高程及等高线形态基本相同,可做为野外工作及其它对地形图精度要求不高工作的参考资料。     

某金矿区农田土壤重金属元素Pb的累积速率

以某金矿区农田土壤重金属Pb为研究对象,分别以2004和2012年采集样品的测试结果作为计算农田土壤重金属Pb累积速率的依据,以2004—2012年作为计算时间区间,以农田土壤重金属Pb的累积速率为研究内容,采用对比分析方法,分析区域Pb的累积速率特征,阐明人类工程活动极大地影响着农田土壤重金属Pb的累积过程。研究结果表明,全区农田土壤Pb平均累积速率为31.8mg/kg·a-1。选取选矿厂、冶炼厂、尾矿库、污水灌溉区、车载尾矿弃渣等典型污染源,对周边农田土壤Pb累积的时空变化特征进行分析。结果显示,选矿厂对农田土壤Pb累积的影响最大,其周边农田土壤Pb累积速率相当于全区Pb累积速率的4倍,该结论对防治重金属污染及保障人体健康具有实际指导意义。     

日本大沼湖沉积物碳氮比值、有机碳同位素特征及其近400年的古气候环境意义

通过对日本大沼湖沉积物样品总有机碳含量(TOC)及其稳定同位素、总氮含量(TN)和C/N值的测定,结合沉积岩芯火山灰和1℃年代,分析了大沼湖沉积物中有机质的来源,探讨了沉积物有机碳同位素的主要影响因素.结果表明:大沼湖沉积物中有机质主要来源于自生藻类,受陆源输入的影响较小;沉积物δ13C值指示了夏季温度的变化.过去400年来,大沼湖地区存在1660～ 1730年和1780～ 1860年两个明显的冷期,与邻近地区冰芯、树轮和湖泊沉积物记录的冷期基本一致,分别对应于Maunder和Dalton太阳黑子极小期.     

基于Global Mapper的DEM检查方法

Global Mapper是一款地图绘制软件。本文结合辽宁省测绘局1∶10000 DEM制作项目,阐述了利用Global Mapper软件对DEM最终成果进行质量检查的具体检查方法。