斑尾复鰕虎鱼群体的形态学比较

对采自丹东、大连、东营、青岛、赣榆、舟山、厦门7个斑尾复鰕虎鱼群体的可量性状和可数性状进行了主成分分析、聚类分析、判别分析和单因子方差分析.主成分分析和聚类分析结果显示东营和赣榆群体为一组,而其它群体为另一组.2组差异极为显著.主成分分析构建了4个主成分,其贡献率分别为41.30%,8.92%,8.08%和7.31%,累计贡献率为65.60%.第一主成分主要受尾柄长/尾柄高、体高/体长、头长/体长和吻至背鳍起点/体长的影响.判别分析也可将两组群体分开,东营和赣榆组与另一组没有误判,对于样本所属海域的判别,其中东营为100%,最低为青岛群体66.7%,综合判别率为85.5%;选取贡献较大的14个特征值建立判别公式,利用判别公式计算各群体的差别准确率为62.1%～100%.对形态特征参数进行单因子方差分析,计算差异系数,根据Mayr等提出的75%规则,认为两组群体已达到亚种水平,而两组群体内的形态差异为种内不同群体间的差异.     

滇西南澜沧群多硅白云母的多型和化学成分特征及其意义

从理论、实验及实际观察的结果都表明,随着压力的增加白云母中绿鳞石的含量显著地增加,可以认为在多期变质作用过程中,尤其是在变质压力不同的多期变质作用下,形成的多硅白云母,其化学成分就会打上不同的烙印。７７个多硅白云母化学成分的统计结果表明,澜沧群低级变质岩中的多硅白云母有两种成因。在Ｎａ－Ｍｇ相关图上,反映了高压和中压变质特征,高压变质的多硅白云母约占７０％。这与用多硅白云母ｂ０值鉴别的高压和中压变质是相吻合的。多硅白云母的多型为３Ｔ和２Ｍ１型,以２Ｍ１型为主     

微生物絮凝剂絮凝活性研究

用微生物絮凝剂对2g/L,200目高岭土悬浊液絮凝率的测定,得出培养液中絮凝活性分布及活性菌产生絮凝剂时的最佳条件.这种菌产絮凝剂的最佳条件如下pH值7.5～9.0,温度28～30℃,300r/min摇床培养45～60h.     

Evaluation of heavy metal contamination and implication of multiple sources from Hunchun basin, northeastern China

Present concentrations and distributions of heavy metals through profiles, surface soil, and stream sediment samples in the Hunchun area, north-eastern China, were investigated to determine the elemental background values. This study also aims to characterize potentially toxic materials such as pulverized fly ash (PFA) from power stations or ash and slag from coal used domestically in urban areas, agrochemicals applied inappropriately, and urban sewage sludges from Hunchun City, as well as to ascertain the possibility of natural enrichment through site characterization by mineralogical and geochemical investigation. The distribution of contaminants in the alluvial soils (fluvisol) of this area has been influenced by several interacting factors. The parent alluvial materials from weathered products of amphiboles have made coatings such as ferrihydrite, goethite, and hematite. This natural inheritance factor is supported by the fact that the concentrations of weak acid-extractable (plant-available) heavy metals are very low, except for Fe and Mn. However, in agricultural soils and adjacent stream sediments, an anthropogenic input of Cd, Pb, Ni and Cr by agrochemicals is strongly suggested. Also, F contamination by coal combustion and the dissolution of F-bearing minerals could cause some future problems. Wide distribution and significantly high concentrations of Cd, Fe, Mn, and F in soils throughout the combination of pollutants originating from lithogenic and the anthropogenic sources pose potential problems in utilizing water resources. Received: 14 June 1999 · Accepted: 27 December 1999     

江西安远路迳金伯利质煌斑岩筒的Rb-Sr同位素年龄及其地质意义

报道了赣南安远县路迳金伯利质煌斑岩筒的 Rb-Sr等时线地质年龄 :t=( 3 7.6± 2 .2 ) Ma,初始值 [n( 87Sr) / n( 86Sr) ] i=0 .70 5 17± 0 .0 0 0 12。     

新疆坡十铜镍硫化物含矿岩体岩浆源区特征及构造背景探讨

新疆坡北辉长岩体位于塔里木古陆东北缘的北山裂谷带中,坡一和坡十铜镍硫化物含矿超镁铁岩体位于坡北岩体内.尽管坡十超镁铁岩体与坡北辉长岩呈侵入接触,但两者的微量元素和同位素组成显示良好 的一致性,表明两岩相虽然分不同阶段侵入就位,但仍为同源岩浆的产物.MnO-TiO2-R2O5及Th-Hf-Ta判别图解显示坡北及坡十岩体的...     

西藏冈底斯带中南部与俯冲有关的早侏罗世花岗闪长岩:锆石U-Pb年代学及地球化学证据

肖打松多花岗闪长岩位于西藏冈底斯花岗岩带中段以南,主要岩石类型有:细中粒黑云母(角闪石)花岗闪长岩、细中粒含斑黑云母(角闪石)花岗闪长岩、细中粒斑状黑云母(角闪石)花岗闪长岩,岩石具钙碱性特征,w(SiO2)=61.58％～72.16％,w(K2O)/w(Na2O) =0.64～1.15,相对富钠,A/CNK=1.25...     

应用阴极发光技术探讨含矿岩系成岩作用及其与成矿关系——以云南金顶铅锌矿床为例

应用阴极发光技术对云南金顶铅锌矿床含矿岩系成岩作用进行了研究,其中包括胶结作用、交代作用、压实压溶作用等。根据阴极发光特征揭示了方解石胶结物的不同世代、不同类型胶结物的生成顺序、矿物之间形成的先后关系,确定了成岩阶段,进而探讨成岩作用与成矿作用的关系,以及矿化期次,说明阴极发光技术是一种简便、可靠的矿床研究的手段之一。     

Gas accumulation from oil cracking in the eastern Tarim Basin: A case study of the YN2 gas field

Oil and gas exploration in eastern Tarim Basin, NW China has been successful in recent years, with several commercial gas accumulations being discovered in a thermally mature to over-mature region. The Yingnan2 (YN2) gas field, situated in the Yingnan structure of the Yingjisu Depression, produces gases that are relatively enriched in nitrogen and C₂₊ alkanes. The δ¹³C₁ (−38.6‰ to −36.2‰) and δ¹³C₂ values (−30.9‰ to −34.7‰) of these gases are characteristic of marine sourced gases with relatively high maturity levels. The distributions of biomarkers in the associated condensates suggest close affinities with the Cambrian–Lower Ordovician source rocks which, in the Yingjisu Sag, are currently over-mature (with 3–4%Ro). Burial and thermal maturity modeling results indicate that paleo-temperatures of the Cambrian–Lower Ordovician source rocks had increased from 90 to 210 °C during the late Caledonian orogeny (458–438 Ma), due to rapid subsidence and sediment loading. By the end of Ordovician, hydrocarbon potential in these source rocks had been largely exhausted. The homogenization temperatures of hydrocarbon fluid inclusions identified from the Jurassic reservoirs of the YN2 gas field suggest a hydrocarbon emplacement time as recent as about 10 Ma, when the maturity levels of Middle–Lower Jurassic source rocks in the study area were too low (<0.7%Ro) to form a large quantity of oil and gas. The presence of abundant diamondoid hydrocarbons in the associated condensates and the relatively heavy isotopic values of the oils indicate that the gases were derived from thermal cracking of early-formed oils. Estimation from the stable carbon isotope ratios of gaseous alkanes suggests that the gases may have been formed at temperatures well above 190 °C. Thus, the oil and gas accumulation history in the study area can be reconstructed as follows: (1) during the late Caledonian orogeny, the Cambrian–Lower Ordovician marine source rocks had gone through the peak oil, wet gas and dry gas generation stages, with the generated oil and gas migrating upwards along faults and fractures to form early oil and gas accumulations in the Middle–Upper Ordovician and Silurian sandstone reservoirs; (2) since the late Yanshanian orogeny, the early oil accumulations have been buried deeper and oil has undergone thermal cracking to form gas; (3) during the late Himalayan orogeny, the seals for the deep reservoirs were breached; and the gas and condensates migrated upward and eventually accumulating in the relatively shallow Jurassic reservoirs.