Nd:YAG纳秒激光诱导硅表面微结构的演化

利用Nd:YAG纳秒激光(波长为532和355 nm)对单晶硅在真空中进行了累积脉冲辐照,研究了表面微结构的演化情况.在激光辐照的初始阶段,532和355 nm激光脉冲均在硅表面诱导出了波纹结构,后者辐照硅表面后形成了近似同心但稍显混乱的环形波纹结构.随着脉冲数的增加,波纹结构逐渐演化为一种类似珠形的凹凸结构,最后形成准规则排列的微米量级锥形结构,该微结构的生长依赖于表面张力波和结构自组织.分析发现,形成的交叉环形结构主要是在355 nm激光辐照硅的过程中,表面张力波导致波纹结构部分叠加的结果.     

同步辐射标定平面镜反射率不确定度分析方法研究

为了提高多通道软X射线能谱仪的测量精度,2009年在北京同步辐射(BSRF)软X束线源上对多种材料的掠入射平面镜的反射率进行了标定.在标定实验的基础上,对光源的单色性、高次谐波以及源强稳定性、探测器响应一致性和数据采集统计误差等多项不确定因素进行了评估,给出了反射率的修正方法和相应的不确定度分析结果.     

Control of high-order harmonic generation with two-colour laser field

We numerically investigate the high-order harmonic generation with two-colour optical field, taking into consideration the propagation effects. Some harmonics can be dramatically enhanced at a certain delay between the fundamental pulse and its second harmonics. Choice of the enhanced harmonics can be realised by changing the time delay between the two laser pulses.     

Improvement of the axial trapping effect using azimuthally polarised trapping beam

A dual optical tweezers system, which consists of a doughnut mode optical tweezer (DMOT) with the azimuthally polarised trapping beam and a solid mode optical tweezer (SMOT) with the Gauss trapping beam was constructed to compare the axial trapping effect of DMOT and SMOT. The long-distance axial trapping of ST68 microbubbles (MBs) achieved by DMOT was more stable than that of SMOT. Moreover the axial trapping force measured using the viscous drag method, was depended on the diameter of the particle, the laser power, and the numerical aperture (NA) of the objective lens. The measurement of the axial trapping force and the acquisition of CCD images of trapping effect confirmed that the DMOT showed excellent axial trapping ability than SMOT. A simple and effective method is developed to improve axial trapping effect using the azimuthally polarized beam as trapping beam. This is helpful for the long-distance manipulating of particles especially polarised biological objects in axial direction.     

盐田藻垫细菌的分离及其胞外多糖的初步研究

从连云港台南盐场采集藻垫,在去除底泥等杂物的藻类层中分离出5株不同的细菌(编号为A,B,c,D和E).经VITEK-32鉴定,A和B可能是鲁氏不动杆菌(Acinetobacter lwoffii)或琼氏不动杆菌(Acinetobacter junii),C为溶血巴斯德菌(Pasteurella haemolytica),D为尿素放线杆菌(Actinobacillus ureae),E未鉴定出结果.在所试验的盐度范围内,细菌A、B和C的最适生长盐度都为25,细菌D的最适生长盐度为50～100,细菌E的最适生长盐度为25～50.细菌A,B,C,D和E细菌胞外多糖产率分别为0.628,0.362,0.177,0.269,0.719 g/g细胞干质量.细菌A,B,C,D和E胞外多糖的糖醛酸质量分数分别为5.4%,9.9%,7.4%,9.8%和23.4%,均不含蛋白质,均无乳化.絮凝及凝胶活性.实验结果显示细菌胞外多糖是构成盐田藻垫胶质的重要组成部分,但从其物化性质看,细菌胞外多糖对藻垫的胶结和黏附性没有直接的影响.     

Formation of saddle dolomites in Upper Cambrian carbonates, western Tarim Basin (northwest China): Implications for fault-related fluid flow

The saddle dolomites occur more intensely in cores closely to fault than that in cores far away from the fault in Upper Cambrian carbonate of western Tarim basin, suggesting that formation of the saddle dolomites is likely related to fault-controlled fluid flow. They partially fill in fractures and vugs of replacement dolomite. The saddle dolomites exhibit complex internal textures, commonly consisting of core and cortex. In comparison with the matrix dolomites, the saddle dolomites show lower Sr-content and ⁸⁷Sr/⁸⁶Sr ratios, higher Fe- and Mn-content, and more negative δ¹⁸O values. Combined with high Th (100–130 °C) of primary fluid inclusions, it is suggested that the saddle dolomites precipitated from hydrothermal fluid derived from the deep evaporite-bearing Middle Cambrian strata, and the magnesium source may be due to dissolution of host dolomite during hydrothermal fluid migration. Fault activity resulted in petrographic and geochemical difference of the core and cortex of the saddle dolomites. The cores precipitated from the formation water mixed by deep brines at the early stage of fault activity, and the cortexes precipitated from the deep fluid with higher temperatures through the Middle Cambrian later. In summary, the formation of the saddle dolomites implies a hydrothermal fluid event related to fault activity, which also resulted in high porosity in Upper Cambrian carbonate in western Tarim Basin.     

地层测试评价仪在渤海油田的应用

电缆地层测试是求取储层流体性质、进行储层评价最为直接的方法之一。地层测试评价仪（FET）是国产新一代地层测试评价仪器,不仅可以精确测量地层压力并根据压力剖面确定地层流体类型和油气水界面,而且在目的层取样时可以抽排污染流体、实时检测地层流体特性,对确定地层流体性质和分析流体成分起到了重要作用,同时它也可以计算地层渗透率,进行储层产能预测。通过在渤海油田的成功应用,简单介绍FET的基本工作原理和主要用途,重点论述其优越性和局限性,以及在渤海油田成功应用的典型实例,这对FET在其它油田的推广应用具有参考意义。     

体重和温度对华贵栉孔扇贝(Chlamys nobilis)耗氧率和排氨率的影响

采用室内实验生态学方法对华贵栉孔扇贝的耗氧率和排氨率进行了研究。旨在为华贵栉孔扇贝养殖容量的调查及生态生理的研究提供参考,并可为海洋生态系统动力学和贝类能量学研究提供科学依据。实验结果表明,在实验温度(13—33℃)范围内,华贵栉孔扇贝的耗氧率(OR)和排氨率(NR)与体重(W)都呈负相关,可以用Y=aW-b表示。华贵栉孔扇贝的耗氧率和温度的关系可以表示为OR=-c+b1T-b2T2。在13—28℃温度范围内,华贵栉孔扇贝的耗氧率随温度的升高而增加,28℃时,耗氧率达到最大值,温度升高到33℃时,耗氧率反而下降。而排氨率与温度的关系可以表示为1NR=c1edT,在实验温度范围内,排氨率随温度的升高则呈持续升高趋势。华贵栉孔扇贝呼吸和排泄Q10值范围分别为0.466—2.471和1.129—2.437。在23—28℃温度范围内,不同规格华贵栉孔扇贝的耗氧率和排氨率的比值(原子数O:N)较高。方差分析表明,体重、温度及二者的交互作用对华贵栉孔扇贝的耗氧率和排氨率均有极显著的影响(P0.01)。华贵栉孔扇贝的日常代谢明显高于标准代谢,耗氧率和排氨率平均值分别提高29.9%和69.4%。     

Spatial and temporal distributions of nitrogen, phosphorus and heavy metals in the intertidal sediment of the Chang jiang River Estuary in China

Spatial and temporal distributions of nutrients (N and P) and heavy metals (Cu, Zn, Pb and Cd) in the intertidal sediments at Dongtan wetland of the Changjiang River (Yangtze River) Estuary were examined by laying one transect running seaward to landward during January, April, June, August and October of 2005. Total nitrogen (TN) and heavy metal concentrations in the intertidal sediment showed an increasing trend from open bare °at to the high marsh, with the maximum concentrations in the high marsh and the minimum values in open bare °at. In contrast, sediment total phosphorus (TP) concentrations changed little among sampling sites. One-way ANOVA found that there were signiˉcantly temporal variations of nutrients and heavy metals concentrations in the intertidal sediment (P <0.05). The concentrations of heavy metals generally showed an increasing trend from January to October. As compared with other large estuaries, heavy metal contamination in the intertidal sediment of the Changjiang River Estuary was relatively low.