Automated mapping of rock slope geometry,kinematics and stability with RSS-GIS

A GIS-implemented, deterministic approach for the automated spatial evaluation of geometrical and kinematical properties of rock slope terrains is presented. Based on spatially distributed directional information on planar geological fabrics and DEM-derived topographic attribute data, the internal geometry of rock slopes can be characterized on a grid cell basis. For such computations, different approaches for the analysis and regionalization of available structural directional information applicable in specific tectonic settings are demonstrated and implemented in a GIS environment. Simple kinematical testing procedures based on feasibility criteria can be conducted on a pixel basis to determine which failure mechanisms are likely to occur at particular terrain locations. In combination with hydraulic and strength data on geological discontinuities, scenario-based rock slope stability evaluations can be performed. For conceptual investigations on rock slope failure processes, a GIS-based specification tool for a 2-D distinct element code (UDEC) was designed to operate with the GIS-encoded spatially distributed rock slope data. The concepts of the proposed methodology for rock slope hazard assessments are demonstrated at three different test sites in Germany.     

GPS网平差观测量选取的理论分析

由多台GPS接收机在不同时段进行静态观测而组成的观测网形,当采用高精度的科研软件与常用商用软件解算基线时,其基线向量的方差阵不同,前者的方差阵结构是完全的、严密的。同时,在进行GPS网平差时,选取GPS基线的方式及数量的不同,构造的网形也就不同,采用不同的数学模型其得到的平差结果和精度指标也不相同。文章先从理论上进行分析,后用示例进行比较论证。     

三维地理信息系统中几何特征的误差模型

本文提出了三维地理信息系统中几何特征的误差模型。基于面表示的三维GIS的特征被分为点、线段及线,该模型给出这些特征的一种误差描述,即围绕着这些几何特征的量测值的一个范围。     

北斗三号卫星经验型太阳光压模型分析与精化

太阳光压摄动作为在轨导航卫星受到的最大的非保守力,是卫星精密定轨的重要误差源。ECOM模型、ECOM2模型,这两种经验型光压模型被广泛应用于导航卫星定轨。然而,ECOM模型和ECOM2模型分别是针对GPS和GLONASS卫星设计的,并不完全适用于我国北斗三号(BDS-3)卫星。针对五参数ECOM模型在BDS-3卫星低太阳高度角时期轨道不连续性增大的问题,本文提出在 D方向引入一阶周期项来吸收未被模型化光压加速度。结果表明,引入一阶余弦周期项 D_c,能将低太阳高度角时期CAST卫星的切向、法向、径向重叠轨道误差分别减小约60%、52%、29%。针对ECOM2模型中 D_2c和 D₀、D_2s和 B_s之间存在的强相关性,本文提出了不估计 D_2c参数的八参数ECOM2模型和不估计 D_2c与 D_2s的七参数ECOM2模型。结果表明,相较九参数ECOM2模型,不估计 D_2c参数的八参数ECOM2模型能够将CAST卫星和SECM卫星径向重叠轨道误差分别减少约18%和27%。在此基础上,继续移除 D_2s后(七参数ECOM2),径向重叠轨道误差可进一步减小5.2%~8.5%。综合考察重叠轨道精度和SLR检核精度,不顾及 D_2c和 D_2s的七参数ECOM2模型表现最佳。CAST卫星和SECM卫星重叠轨道切向、法向、径向精度分别为5.0、3.4、1.4 cm和5.4、3.5、1.5 cm;SLR检核残差标准差分别为3.1~3.2 cm、4.4~4.7 cm。     

电子签章技术在办公自动化系统中的应用

电子签章技术是应用十分广泛的一种信息安全技术,其用来保证信息在传输过程中的真实性、完整性以及不可否认性。本文分析了办公自动化系统中存在的安全问题,在此基础上阐述了电子签章的概念、分类、实现原理以及其在办公自动化系统中应用的可行性和原则,并对系统的总体框架和功能进行了详细描述。     

基于SMVF的高频雷达自适应多目标检测

针对高频雷达强海杂波和干扰环境下的多目标检测问题,结合S-method时频分布和Vitcrbi算法提出了一种多分量线性调频信号瞬时频率估计方法—SMVF法(S-method viterbi fitting),然后根据所提取的瞬时频率的直线拟合性能,提出了一种自适应多目标检测算法。实测数据的处理结果,表明了该算法在低信噪比时,与WDM法(wigncr distribution maxima) , WDV法( wigncr distribution vitcrbi)相比,估计精度提高约2000,验证了该算法的可行性和有效性。     

The determination of potential difference by the joint application of measured and synthetical gravity data: a case study in Hungary

In an elementary approach every geometrical height difference between the staff points of a levelling line should have a corresponding average g value for the determination of potential difference in the Earth’s gravity field. In practice this condition requires as many gravity data as the number of staff points if linear variation of g is assumed between them. Because of the expensive fieldwork, the necessary data should be supplied from different sources. This study proposes an alternative solution, which is proved at a test bed located in the Mecsek Mountains, Southwest Hungary, where a detailed gravity survey, as dense as the staff point density (~1 point/34 m), is available along a 4.3-km-long levelling line. In the first part of the paper the effect of point density of gravity data on the accuracy of potential difference is investigated. The average g value is simply derived from two neighbouring g measurements along the levelling line, which are incrementally decimated in the consecutive turns of processing. The results show that the error of the potential difference between the endpoints of the line exceeds 0.1 mm in terms of length unit if the sampling distance is greater than 2 km. Thereafter, a suitable method for the densification of the decimated g measurements is provided. It is based on forward gravity modelling utilising a high-resolution digital terrain model, the normal gravity and the complete Bouguer anomalies. The test shows that the error is only in the order of 10⁻³mm even if the sampling distance of g measurements is 4 km. As a component of the error sources of levelling, the ambiguity of the levelled height difference which is the Euclidean distance between the inclined equipotential surfaces is also investigated. Although its effect accumulated along the test line is almost zero, it reaches 0.15 mm in a 1-km-long intermediate section of the line.     

Using gravity and topography-implied anomalies to assess data requirements for precise geoid computation

Many regions around the world require improved gravimetric data bases to support very accurate geoid modeling for the modernization of height systems using GPS. We present a simple yet effective method to assess gravity data requirements, particularly the necessary resolution, for a desired precision in geoid computation. The approach is based on simulating high-resolution gravimetry using a topography-correlated model that is adjusted to be consistent with an existing network of gravity data. Analysis of these adjusted, simulated data through Stokes’s integral indicates where existing gravity data must be supplemented by new surveys in order to achieve an acceptable level of omission error in the geoid undulation. The simulated model can equally be used to analyze commission error, as well as model error and data inconsistencies to a limited extent. The proposed method is applied to South Korea and shows clearly where existing gravity data are too scarce for precise geoid computation.