The pattern,evolution, and mechanism of venture capital flows in the Guangdong-Hong Kong-Macao Greater Bay Area,China

As an important innovation flow, venture capital has been examined in urban network research. However, the segmentation of capital categories and the cross-scale connection of capital remain scarcely analyzed. This study focuses on the structure and industry differentiation of venture capital flows in the Guangdong-Hong Kong-Macao Greater Bay Area(GBA) and its cross-scale network characteristics. Based on a venture capital database covering capital amount, investment subject address information,...     

Compression behavior of MICP-treated sand with various gradations

Acta Geotechnica - One-dimensional compression tests on quartz sands treated by microbially induced carbonate precipitation (MICP) were carried out to evaluate the effects of gradation and calcium...     

A micro–macro investigation of the capillary strengthening effect in wet granular materials

Wet granular materials are three-dimensionally simulated by the discrete element method with water bridges incorporated between particles. The water bridges are simplified as toroidal shapes, and the matric suction is constantly maintained in the material. A comparison with experimental tests in the literature indicates that the toroidal shape approximation may be one of the best choices with high practicability and decent accuracy. Mechanical behaviours of wet granular materials are studied by triaxial tests. Effects of particle size distributions and void ratios are investigated systematically in this study. The hydraulic limit of the pendular state is also discussed. It gives the capillary cohesion function which is not only determined by the degree of saturation but also positively correlated to relative density and particle size polydispersity and inversely proportional to mean particle size. Furthermore, the capillary strengthening effect is also analysed microscopically in aid of the Stress–Force–Fabric relationship, mainly in fabric anisotropy, coordination number and stress transmission pattern, which revealed the micro-mechanisms of the additional effective stress induced by capillary effect.     

硅灰加固宁波软土的试验研究

为探索硅灰对软土的力学性质的影响,以宁波鄞州地区一种淤泥质黏土为试样,掺入不同量的硅灰,对硅灰加固土的力学性质和结构特征进行了测试。采用三轴不固结不排水剪切试验,测试分析了不同掺入量的硅灰加固土的应力应变关系,通过扫描电镜SEM照片分析了不同硅灰掺入量的硅灰加固土的结构特征。结果表明:(1)硅灰可以提高软土的黏聚力,黏聚力随着硅灰掺入量的增加而增大;(2)随着硅灰掺入量的增加,硅灰加固土的抗变形能力呈先增加后减小的趋势;(3)同一围压条件下,随着硅灰掺入量的增加,硅灰加固土的破坏偏应力逐渐增加;(4)随着硅灰掺入量的增加,硅灰加固土中大孔隙逐渐减少,小孔隙逐渐数量增加,孔径<1μm的小孔隙组分逐渐占优。     

黄陵背斜的构造几何形态及其成因探讨

黄陵背斜位于扬子克拉通的东缘,其核部出露的崆岭群被认为是扬子克拉通的基底岩石,并成为华南地质学研究的热点地区。从区域上看,黄陵背斜紧邻江汉盆地,东西两侧分别是荆当盆地与秭归盆地,黄陵背斜和周缘盆地构成明显的隆起—坳陷相互对应的构造。详细的野外观察和构造几何学的剖析表明,黄陵背斜的两翼西陡东缓,构成不对称背形的穹隆构造。在穹隆形成过程中,相应的岩石变形以顺层滑脱及相关的褶皱和小规模的逆冲断层为主,在早三叠世薄层灰岩、志留纪龙马溪组页岩、奥陶纪灰岩、寒武纪炭质灰岩以及震旦纪陡山沱组薄层灰岩广泛发育,并具有垂向缩短的重力滑脱特点,构造叠加关系指示了其形成于晚侏罗—早白垩纪之间。在构造变形分析的基础上,并深入探讨了黄陵背斜成因的3种可能的动力学背景。     

基于扩散滤波的多尺度三维变分研究

将扩散方程引入三维变分分析,揭示了传统3D-VAR不能有效提取多尺度观测信息的根本原因,即观测导致的目标函数梯度在空间的不连续分布.将扩散滤波融入基于梯度的最优化算法,发展了基于扩散滤波的多尺度3D-VAR.海表面温度数据同化试验结果表明,新方法可从长波至短波有效地提取多尺度的观测信息.     

Robust control based on feedback linearization for roll stabilizing of autonomous underwater vehicle under wave disturbances

In the case of Autonomous Underwater Vehicle(AUV) navigating with low speed near water surface,a new method for design of roll motion controller is proposed in order to restrain wave disturbance effectively and improve roll stabilizing performance.Robust control is applied,which is based on uncertain nonlinear horizontal motion model of AUV and the principle of zero speed fin stabilizer.Feedback linearization approach is used to transform the complex nonlinear system into a comparatively simple linear system.For parameter uncertainty of motion model,the controller is designed with mixed-sensitivity method based on H-infinity robust control theory.Simulation results show better robustness improved by this control method for roll stabilizing of AUV navigating near water surface.     

Study on scattering wave force of horizontal and vertical plate type breakwaters

The interaction between wave and horizontal and vertical plates is investigated by the boundary element method,and the relations of wave exciting force with plate thickness,submergence and length are obtained.It is found that:1) The efficient wave exciting force exists while plate submergence is less than 0.5 m,and the plate is very thin with order O(0.005 m).2) The maximum heave wave exciting force exists,and it is the main factor for surface and submerged horizontal plate while the roll force can be ignored.3) The maximum sway wave exciting force exists,it is the main factor for surface or submerged vertical plate,and the roll force is about 20 times of horizontal plate.