Detection and quantification of local anthropogenic and regional climatic transient signals in temperature logs from Czechia and Slovenia

The paper reports on detection and quantification of the impact of local anthropogenic structures and regional climatic changes on subsurface temperature field. The analyzed temperature records were obtained by temperature monitoring in a borehole in Prague-Spo?ilov (Czechia) and by repeated logging of a borehole in ?empeter (Slovenia). The observed data were compared with temperatures yielded by mathematical 3D time-variable geothermal models of the boreholes’ sites with the aim to decompose the observed transient component of the subsurface temperature into the part affected by construction of new buildings and other anthropogenic structures in surroundings of the boreholes and into the part affected by the ground surface temperature warming due to the surface air temperature rise. A direct human impact on the subsurface temperature warming was proved and contributions of individual anthropogenic structures to this change were evaluated. In the case of Spo?ilov, where the mean annual warming rate reached 0.034°C per year at the depth of 38.3?m during the period 1993–2008, it turned out that about half of the observed warming can be attributed to the air (ground) surface temperature change and half to the human activity on the surface in the immediate vicinity of the borehole. The situation is similar in ?empeter, where the effect of the recently built surface anthropogenic structures is detectable down to the depth of 80?m and the share of the anthropogenic signal on the non-stationary component of the observed subsurface temperature amounts to 30% at the depth of 50?m.     

The Mammoth Peak sheeted complex,Tuolumne batholith,Sierra Nevada,California: a record of initial growth or late thermal contraction in a magma chamber?

The Mammoth Peak sheeted intrusive complex formed in the interior of a ~7–10 km deep magma chamber, specifically in the Half Dome granodiorite of the Tuolumne batholith, central Sierra Nevada, CA (USA). The sheets consist of fractionated melts with accumulated hornblende, biotite, magnetite, titanite, apatite, and zircon. The accumulation, especially of titanite, had a profound effect on minor and trace elements (Nb, Ta, Ti, REE, U, Th, P, Zr, Hf, etc.), increasing their contents up to five to six times. Our thermal–mechanical modeling using the finite element method shows that cooling-generated tensile stresses resulted in the inward propagation of two perpendicular sets of dilational cracks in the host granodiorite. We interpret the sheeted complex to have formed by a crack-seal mechanism in a high strength, crystal-rich mush, whereby outward younging pulses of fractionated magma were injected into these syn-magmatic cracks at the margin of an active magma chamber. Thermal–mechanical instabilities developed after the assembly of the sheeted complex, which was then overprinted by late ~NW–SE magmatic foliation. This case example provides a cautionary note regarding the interpretation that sheeted zones in large granitoid plutons imply a diking mechanism of growth because the sheeted/dike complexes in plutons (1) may display inverse growth directions from the growth of the overall intrusive sequence; (2) need not record initial chamber construction and instead may reflect late pulsing of magma within an already constructed magma chamber; (3) have an overprinting magmatic fabric indicating the continued presence of melt after construction of sheeted complexes and thus a prolonged thermal history as compared to dikes; and (4) because the scale of the observed sheeted complexes may be small (<1%) in comparison to large homogenous parts of plutons, in which there is no evidence for sheeting or diking. Thus, where extensive dike complexes in plutons are absent, such as in much of the Tuolumne batholith, the application of an incremental diking model to explain chamber construction is at best speculative.     

A decline in molluscan carbonate production driven by the loss of vegetated habitats encoded in the Holocene sedimentary record of the Gulf of Trieste

Carbonate sediments in non‐vegetated habitats on the north‐east Adriatic shelf are dominated by shells of molluscs. However, the rate of carbonate molluscan production prior to the 20th century eutrophication and overfishing on this and other shelves remains unknown because: (i) monitoring of ecosystems prior to the 20th century was scarce; and (ii) ecosystem history inferred from cores is masked by condensation and mixing. Here, based on geochronological dating of four bivalve species, carbonate production during the Holocene is assessed in the Gulf of Trieste, where algal and seagrass habitats underwent a major decline during the 20th century. Assemblages of sand‐dwelling Gouldia minima and opportunistic Corbula gibba are time‐averaged to >1000 years and Corbula gibba shells are older by >2000 years than shells of co‐occurring Gouldia minima. This age difference is driven by temporally disjunct production of two species coupled with decimetre‐scale mixing. Stratigraphic unmixing shows that Corbula gibba declined in abundance during the highstand phase and increased again during the 20th century. In contrast, one of the major contributors to carbonate sands – Gouldia minima – increased in abundance during the highstand phase, but declined to almost zero abundance over the past two centuries. Gouldia minima and herbivorous gastropods associated with macroalgae or seagrasses are abundant in the top‐core increments but are rarely alive. Although Gouldia minima is not limited to vegetated habitats, it is abundant in such habitats elsewhere in the Mediterranean Sea. This live–dead mismatch reflects the difference between highstand baseline communities (with soft‐bottom vegetated zones and hard‐bottom Arca beds) and present‐day oligophotic communities with organic‐loving species. Therefore, the decline in light penetration and the loss of vegetated habitats with high molluscan production traces back to the 19th century. More than 50% of the shells on the sea floor in the Gulf of Trieste reflect inactive production that was sourced by heterozoan carbonate factory in algal or seagrass habitats.     

Long-term monitoring of wall paintings affected by soluble salts

Long-term monitoring of wall paintings in historical monuments aims at clarifying involved decay processes and at the same time controlling effects of interventions for conservation. Monitored decay processes relate to the crystallisation of various salts – particularly of nitronatrite and gypsum – from hygroscopic solutions accumulated in the zone of ground moisture. The salts crystallise in response to climatic variations and other environmental changes. Measures for conservation such as protection from water infiltration, reduction of heating temperature and reduction of surface salt accumulation cause a significant slow-down but not a stop of decay. The particular dynamics and causes of remaining slow decay processes are described on three sites in Switzerland: the convent church of Müstair, the crypt in the cathedral of Basel and the crypt in the Grossmünster church of Zürich.     

Discontinuous Nature of the Lower Part of the South American Wadati-Benioff Zone in The Arica Elbow Region

The Arica Elbow region represents that part of Andean South America where the azimuth of the strike of the Peru-Chile trench changes from 150° to 190°. The area under study is roughly bounded by latitudes 17 °S and 23 °S, The shape of the Wadati-Benioff zone was studied in terms of the distribution of ISC hypocentres dated between 1964 and 1993. A system of 22 vertical cross-sections, perpendicular to the trench axis, and a map of epicentres was used to derive the detailed shape of the Wadati-Benioff zone of the presently descending slab. The distribution of earthquake foci indicates a fingerlike shape of the lower part of the Wadati-Benioff zone beneath the aseismic gap. The slab length shows small changes around 350 km in the northern sections, pronounced length oscillations between 350 and 750 km in the neighbouring central sections and a constant value of 650 km in the southern sections. The dip and thickness of the Wadati-Benioff zone are practically constant in all sections. Fault plane solutions, separated spatially into three zones, were used to estimate the state of stress in the slab.     

Changes in the internal spatial structure of post-communist Prague*

The article overviews the most important changes in the internal urban structure of Prague since 1989. Post-communist urban development has been influenced by government-directed reforms of political and economic system, internationalisation and globalisation, public policies favouring unregulated market development, economic restructuring in terms of deindustrialisation and growth of producer services, and increasing social differentiation. The three most transparent processes of urban change in Prague have been (1) commercialisation of the historical core; (2) revitalisation of some inner city neighbourhoods; and (3) residential and commercial suburbanisation in the outer city. This revised version was published online in July 2006 with corrections to the Cover Date.     

Prevailing-frequency approximation of the coupling ray theory along the SH and SV reference rays in a heterogeneous generally anisotropic medium which is approximately uniaxial

The behaviour of the actual polarization of an electromagnetic wave or elastic S–wave is described by the coupling ray theory, which represents the generalization of both the zero–order isotropic and anisotropic ray theories and provides continuous transition between them. The coupling ray theory is usually applied to anisotropic common reference rays, but it is more accurate if it is applied to reference rays which are closer to the actual wave paths. In a generally anisotropic or bianisotropic medium, the actual wave paths may be approximated by the anisotropic–ray–theory rays if these rays behave reasonably. In an approximately uniaxial (approximately transversely isotropic) anisotropic medium, we can define and trace the SH (ordinary) and SV (extraordinary) reference rays, and use them as reference rays for the prevailing–frequency approximation of the coupling ray theory. In both cases, i.e. for the anisotropic–ray–theory rays or the SH and SV reference rays, we have two sets of reference rays. We thus obtain two arrivals along each reference ray of the first set and have to select the correct one. Analogously, we obtain two arrivals along each reference ray of the second set and have to select the correct one. In this paper, we suggest the way of selecting the correct arrivals. We then demonstrate the accuracy of the resulting prevailing–frequency approximation of the coupling ray theory using elastic S waves along the SH and SV reference rays in four different approximately uniaxial (approximately transversely isotropic) velocity models.     

Geophysical evidence of the Eastern Marginal Fault of the Cheb Basin (Czech Republic)

The western part of the Bohemian Massif hosts an intersection of two regional fault zones, the SW-NE trending Oh?e/Eger Graben and the NNW-SSE trending Mariánské Lázně Fault, which has been reactivated several times in the geological history and controlled the formation of the Tertiary Cheb Basin. The broader area of the Cheb Basin is also related to permanent seismic activity of M_L 3+ earthquake swarms. The Eastern Marginal Fault of the Cheb Basin (northern segment of the Mariánské Lázně Fault) separates the basin sediments and underlying granites in the SW from the Kru?né Hory/Erzgebirge Mts. crystalline unit in the NE. We describe a detailed geophysical survey targeted to locating the Eastern Marginal Fault and determining its geometry in the depth. The survey was conducted at the Kopanina site near the Nový Kostel focal zone, which shows the strongest seismic activity of the whole Western Bohemia earthquake swarm region. Complex geophysical survey included gravimetry, electrical resistivity tomography, audiomagnetotellurics and seismic refraction. We found that the rocks within the Eastern Marginal Fault show low resistivity, low seismic velocity and density, which indicates their deep fracturing, weathering and higher water content. The dip of the fault in shallow depths is about 60° towards SW. At greater depths, the slope turns to subvertical with dip angle of about 80°. Results of geoelectrical methods show blocky fabric of the Cheb Basin and deep weathering of the granite bedrock, which is consistent with geologic models based on borehole surveys.