Effect of grain scale alignment on seismic anisotropy and reflectivity of shales

The elastic properties and anisotropy of shales are strongly influenced by the degree of alignment of the grain scale texture. In general, an orientation distribution function (ODF) can be used to describe this alignment, which, in practice, can be characterized by two Legendre coefficients. We discuss various statistical ODFs that define the alignment by spreading from a mean value; in particular, the Gaussian, Fisher and Bingham distributions. We compare the statistical models with an ODF resulting from pure vertical compaction (no shear strain) of a sediment. The compaction ODF may be used to estimate how the elastic properties and anisotropy evolve due to burial of clayey sediments. Our study shows that the three statistical ODFs produce almost identical correspondence between the two Legendre coefficients as a function of the spreading parameter, so that the spreading parameter of one ODF can be converted to the spreading parameter of another ODF. In most cases it is then sufficient to apply the spreading parameter for the ODF instead of the two Legendre coefficients. The effect of compaction on the ODF gives a slightly different correspondence between the two Legendre coefficients from that for the other models. In principle, this opens up the possibility of distinguishing anisotropy effects due to compaction from those due to other processes. We also study reflection amplitudes versus angle of incidence (AVA) for all wave modes, where shales having various ODFs overlie an isotropic medium. The AVA responses are modelled using both exact and approximation formulae, and their intercepts and gradients are compared. The modelling shows that the S‐wave velocity is sensitive to any perturbation in the spreading parameter, while the P‐wave velocity becomes increasingly sensitive to a perturbation of a less ordered system. Similar observations are found for the AVA of the P‐P and P‐SV waves. Modelling indicates that a combined use of the amplitude versus offset of P‐P and P‐SV reflected waves may reveal certain grain scale alignment properties of shale‐like rocks.     

Relationships between morphological and sedimentological parameters in source‐to‐sink systems: a basis for predicting semi‐quantitative characteristics in subsurface systems

The study of source‐to‐sink systems relates long‐term variations in sediment flux to morphogenic evolution of erosional–depositional systems. These variations are caused by an intricate combination of autogenic and allogenic forcing mechanisms that operate on multiple time scales – from individual transport events to large‐scale filling of basins. In order to achieve a better understanding of how these mechanisms influence morphological characteristics on different scales, 29 submodern source‐to‐sink systems have been investigated. The study is based on measurements of morphological parameters from catchments, shelves and slopes derived from a ∼1 km global digital elevation model dataset, in combination with data on basin floor fans, sediment supply, water discharge and deposition rates derived from published literature. By comparing various morphological and sedimentological parameters within and between individual systems, a number of relationships governing system evolution and behaviour are identified. The results suggest that the amount of low‐gradient floodplain area and river channel gradient are good indicators for catchment storage potential. Catchment area and river channel length is also related to shelf area and shelf width, respectively. Similarly to the floodplain area, these parameters are important for long‐term storage of sediment on the shelf platform. Additionally, the basin floor fan area is correlative to the long‐term deposition rate and the slope length. The slope length thus proves to be a useful parameter linking proximal and distal segments in source‐to‐sink systems. The relationships observed in this study provide insight into segment scale development of source‐to‐sink systems, and an understanding of these relationships in modern systems may result in improved knowledge on internal and external development of source‐to‐sink systems over geological time scales. They also allow for the development of a set of semi‐quantitative guidelines that can be used to predict similar relationships in other systems where data from individual system segments are missing or lacking.     

Levels of Organohalogenated Pollutants in Human Milk Samples from Konya City,Turkey

This study reports the levels of organochlorine pesticides (OCPs, α‐, β‐, γ‐ and Δ‐HCHs, p,p′‐DDE, p,p′‐DDD and p,p′‐DDT), polychlorinated biphenyls (PCBs, PCB 28, 52, 101, 153, 138 and 180 congeners) and polybrominated diphenyl ethers (PBDEs, PBDE 47, 99, 100, 153 and 154 congeners) in 45 individual human milk samples collected from Konya City, Turkey. Average concentrations of ΣHCHs, ΣDDTs, ΣPCBs and ΣPBDEs were 22.62, 37.10, 104.95 and 67.34 ng/g lipid wt., respectively. No significant differences in investigated pollutants were found between primiparous and multiparous mothers. There was no correlation between levels of each group of pollutants in human milk and the age of mothers. Moreover, there was no significant difference in the levels of ΣDDTs, between mothers who have eaten fish more than once a week and those who consumed fish less than once. An analysis of the infant exposure to DDTs, HCHs and PCBs via mother's milk indicated that the estimated daily intakes of these pollutants were below the guideline proposed by the World Health Organization (WHO) and the Health Canada which means that there is definitely no concern on children health.     

Species-dependent sensitivity to contaminants: an approach using primary hepatocyte cultures with three marine fish species

There is limited knowledge about the sensitivity of different fish species to environmental pollutants. Such information is pivotal in risk assessment and to understand why some species appear to be more tolerant to contaminants than others. The aim of the current study was to evaluate whether primary hepatocyte cultures of three marine fish species could be established in the field and whether their sensitivity to selected contaminants would differ. Primary hepatocyte cultures of three marine fish species (plaice, long rough dab, Atlantic cod) were established and exposed for 24 h to copper (20-2500 mg L?1) and statins (1-200 mg L?1). Endpoints were esterase activity, metabolic activity and reduced glutathione (GSH) content, all using fluorescent probes. Flatfish hepatocytes were more susceptible to copper and statin exposure than hepatocytes from cod. This study has shown that species-dependent differences in contaminant sensitivity can be investigated using primary hepatocyte cultures.     

Source‐to‐sink analysis of ancient sedimentary systems using a subsurface case study from the Møre‐Trøndelag area of southern Norway: Part 1 – depositional setting and fan evolution

In this study, we use seismic reflection, well and core data to investigate the role that basin physiography and sediment routing systems played on the distribution, geometry and stratigraphic architecture of Upper Cretaceous submarine fans (SF) offshore Norway. The Late Cretaceous Møre‐Trøndelag margin of western Norway was characterised by steep submarine slopes (gradient of ~0.3°–3°). Mudstones dominate the Upper Cretaceous slope succession, although a few regionally extensive, sandstone‐dominated units are developed. We focus on the most regionally extensive sandstone unit, which is of Late Turonian‐to‐Early Coniacian age. Mapping and visualisation of 2D and 3D seismic reflection data and analysis of well data indicates that the sandstone unit comprises a total of 11 SF, which were fed by sand‐rich sediment gravity flows routed through multiple upper slope canyons. Based on the internal organisation of seismic facies, four fan types have been identified: (i) Type Ia fans, which are characterised by <10 erosional channel complexes at their bases and aggradational to landward‐stepping lobes in their upper parts; (ii) Type Ib fans, which are characterised by >10 erosional channel complexes at their bases and aggradational to landward‐stepping lobe and mass‐transport deposits near the fan apex in their upper parts; (iii) Type II fans, which are dominated by aggradational lobe deposits; and (iv) Type III fans, which are dominated by a single channel complex that passes downdip into a small terminal lobe. The different fan types are interpreted to reflect variable stratigraphic responses to source proximity and basin physiography, which is principally related to the degree of local fault reactivation and differential compaction. This variability highlights the diversity of fan types that may occur over short distances along continental margins, and demonstrates the importance of local controls in understanding the internal stratigraphic variability that may be present in deep‐marine successions.     

Mapping mountain areas: learning from Global,European and Norwegian perspectives

Defining the spatial extent of mountain areas has long been a challenge. In the present century, the availability of digital elevation models(DEMs) incorporated into geographic information systems(GIS) has allowed the definition of mountain areas based on topographic and other criteria. This paper presents the various delineations of mountains that have been prepared at three scales – global, regional(Europe), and national – and explores the reasons and processes leading to these delineations, and how they have been used. A detailed case study is then presented for Norway. Overall, two types of approaches to mapping mountains have been taken: first, considering mountains per se, based on elevation and/or topography; second, considering them among other categories, e.g., landforms or biogeographical, environmental or landscape zones. All attempts to map mountain areas derive essentially from the objectives of those commissioning and/or undertaking the work; a unitary definition remains unlikely.     

Rock physics modelling based on depositional and burial history of Barents Sea sandstones

Understanding how physical properties and seismic signatures of present day rocks are related to ancient geological processes is important for enhanced reservoir characterization. In this paper, we have studied this relationship for the Kobbe Formation sandstone in the Barents Sea. These rocks show anomalous low shear velocities and high V_P/V_S ratios, which does not agree well with conventional rock physics models for moderately to well consolidated sandstones. These sandstones have been buried relatively deeply and subsequently uplifted 1–2 km. We compared well log data of the Kobbe sandstone with velocity–depth trends modelled by integrating basin modelling principles and rock physics. We found that more accurate velocity predictions were obtained when first honouring mechanical and chemical compaction during burial, followed by generation of micro-cracks during uplift. We suspect that these micro-cracks are formed as overburden is eroded, leading to changes in the subsurface stress-field. Moreover, the Kobbe Formation is typically heterogeneous and characterized by structural clays and mica that can reduce the rigidity of grain contacts. By accounting for depositional and burial history, our velocity predictions become more consistent with geophysical observables. Our approach yields more robust velocity predictions, which are important in prospect risking and net erosion estimates.     

Seismic on floating ice: data acquisition versus flexural wave noise

Geophysical surveying of the Arctic will become increasingly important in future prospecting and monitoring of the terrestrial and adjacent areas in this hemisphere. Seismic data acquired on floating ice are hampered with extensive noise due to ice vibrations related to highly dispersive ice flexural waves generated by the seismic source. Several experiments have been conducted on floating ice in van Mijenfjorden in Svalbard in the Norwegian Arctic to specifically analyse the extent of flexural waves recorded with various seismic receivers and sources deployed both on top of ice and in the water below. The data show that flexural waves are severely damped at 5 m or deeper below the ice and hydrophone data suffer less from these vibrations compared with data recorded on the ice. Aliasing of single receiver hydrophone data can to some extent be suppressed using an in-line line source of detonating cord. Experiments on ice on shallow water show prominent guided wave modes often referred to as Scholte waves propagating along the seabed. In this case, both flexural and Scholte waves interfere and make a complicated pattern of coherent noise. On shallow water, the positioning and type of the seismic source must be evaluated with respect to the coherent noise generated by these waves. Geophone strings of 25 m effectively suppress both flexural and Scholte waves due to their relative short wavelengths. An airgun generates relative more low-frequency energy than a surface source of detonating cord. Accordingly, seismic mapping of deep seismic horizons seem to be best achieved using geophone strings of such length and an airgun source. For shallow targets, the use of hydrophones in combination with detonating cord is an appropriate solution. Seismic surveying in the Arctic always have to follow environmental restrictions of not disturbing or harming wildlife and not causing permanent footprints into the vulnerable tundra, which implies that the choice of seismic acquisition strategy might occur as a trade-off between optimum data quality and environmental constraints.     

The combined effect of copper and hydrocarbons on the length growth of Mytilus edulis

The combined effect of copper and North Sea crude oil is tested on juvenile Mytilus edulis. Dissolved CuSO₄ x 5H₂O is added to the seawater in concentrations of 3 and 6 μg Cu litre^-1. Crude oil, microencapsulated in a gelatine/acacia structure, is added in concentrations of 1·5 and 3·0 mg oil litre^-1. The shell length growth is measured every 24 h with laser diffraction. Linear effects were observed for single components within 24 h of exposure and significant antagonistic interaction appeared within 48 h. Reduced growth rate coincided with reduced filtering and defaecation, and reduced byssus production.