Jurassic Tectonics of North China: A Synthetic View

This paper gives a synthetic view on the Jurassic tectonics of North China, with an attempt to propose a framework for the stepwise tectonic evolution history. Jurassic sedimentation, deformation and magmatism in North China have been divided into three stages. The earliest Jurassic is marked by a period of magmatism quiescence （in 205-190 Ma） and regional uplift, which are considered to be the continuation of the “Indosinian movement” characterized by continent-continent collision between the North and South China blocks. The Early to Middle Jurassic （in 190-170 Ma） was predominated by weak lithospheric extension expressed by mantle-derived plutonism and volcanism along the Yanshan belt and alongside the Tan-Lu fault zone, normal faulting and graben formation along the Yinshan- Yanshan tectonic belt, depression and resuming of coal-bearing sedimentation in vast regions of the North China block （NCB）. The Middle to Late Jurassic stage started at 165y.5 Ma and ended up before 136 Ma; it was dominated by intensive intraplate deformation resulting from multi-directional compressions. Two major deformation events have been identified. One is marked by stratigraphic unconformity beneath the thick Upper Jurassic molasic series in the foreland zones of the western Ordos thrust-fold belt and along the Yinshan-Yanshan belt; it was predated 160 Ma. The other one is indicated by stratigraphic unconformity at the base of the Lower Cretaceous and predated 135 Ma. During this last stage, two latitudinal tectonic belts, the Yinshan-Yanshan belt in the north and the Qinling-Dabie belt in the south, and the western margin of the Ordos basin were all activated by thrusting; the NCB itself was deformed by the NE to NNE-trending structural system involving thrusting, associated folding and sinistral strike-slip faulting, which were spatially partitioned. Foliated S-type granitic plutons aged 160-150 Ma were massively emplaced in the Jiao-Liao massif east of the Tan-Lu fault zone and indicate important crustal thicken     

Distribution Characteristics of Sulfur and the Main Harmful Trace Elements in China’s Coal

To promote the rational development and use of clean coal resources in China, data on the regional and age distribution of sulfur, arsenic and other harmful elements in Chinese coal was broadly collected, tested for content, and analyzed. Coal in northwestern China is characterized by low to extremely low levels of sulfur; the coal of the Taiyuan Formation in northern China mainly has high-sulfur content; that of the Shanxi Formation is mainly characterized by low sulfur coal; and the Late Permian coal in southern China has overall higher sulfur content; other regions have low sulfur coal. The average content of harmful trace elements in the bulk of China＇s coal is similar to the corresponding content in the coal of the North America and the rest of the world, whereas the content of various elements （Hg, Sb and Se） is different in magnitude to the corresponding percentage in the crust. The average content of the elements Cr, Se, Co, Be, U, Br in Late Permian coal in S China ranks first in the country whereas the average content of Hg and CI in the coals of Late Carboniferous to Early Permian age in N China are the highest. The average content of Mn in Early and Middle Jurassic coal is higher in NW China. The high content of harmful elements in some coal should cause particular concern both in the development and utilization of coal.     

基于GIS的北京城市形态研究

经典的城市形态理论包括同心圆理论、扇形理论和多核心理论.利用2002年北京市土地利用图,采用GIS缓冲区分析的方法,分析了北京市各功能用地的方向特征和圈层特征.结果表明:北京市的土地利用体现了明显的圈层特征,同时各类功能用地在各方向的分布又明显受到了河流、交通干道和工业区等地理要素的影响.北京没有形成城市总体规划的多中心布局,第一道绿化隔离地区中绿地面积没有明显高出其他地区,基本上已经失去了中心城区和边缘集团隔离开的功能.总体上,北京城市空间形态主要是同心圆和扇形的结合,更接近同心圆理论和扇形理论的混合形式.     

框架预应力锚杆边坡支护结构的稳定性分析方法及其 应用

以边坡极限平衡理论及框架预应力锚杆边坡支护结构的圆弧滑动破坏模式为基础,在考虑框架、锚杆对土体边坡稳定性影响的情况下,基于圆弧滑动条分法的思想利用积分法建立了内部稳定性安全系数计算模型和最危险滑移面搜索模型。确定滑移面圆心坐标为几何控制参数,推导了安全系数计算模型中各变量与滑移面圆心坐标之间的函数关系式,从而获得了滑移面几何控制参数与内部稳定性安全系数之间的函数关系。利用网格法对框架预应力锚杆支护结构最危险滑移面的圆心坐标进行动态搜索和求解。最后采用Matlab语言编制了框架预应力锚杆边坡支护结构的稳定性分析程序,并结合工程实例进行了验算,讨论了此种方法的适用条件,结果表明该方法简明适用,较传统的经验分析方法更加合理。     

汶川特大地震后成都盆地内隐伏断层活动性分析

成都盆地内主要有3条隐伏的活动断裂带,包括大邑断裂带、蒲江-新津断裂带和龙泉山断裂带,它们在第四纪都表现出了一定的活动性."512"汶川特大地震后,笔者实地考察的结果表明,在汶川特大地震中成都盆地中的隐伏断裂没有产生新的活动性,目前成都盆地不存在发生特大地震的危险性,是安全的.     

UCD数码相机影像在武汉测区的应用

针对UCD数码航空影像在摄影测量中的空中三角测量和数字测图进行了相关的生产试验。试验结果表明UCD数码航空影像具有较好的成图精度,可以满足大比例尺航测成图的精度指标。根据试验结果对UCD数码影像的生产应用提出了若干建议。     

联合多种测高数据确定中国海及其邻域1．5′×1．5′重力异常

联合多种测高资料和Geosat/GM波形重构数据,基于EIGEN_CG01C重力场模型,采用沿轨迹加权最小二乘方法和逆Vening-Meinesz公式,确定了中国海及其邻域1.5′×1.5′重力异常。将计算结果与最新船测资料进行了比较,标准差为3.37×10-5m.s-2。     

首都圈地区现今地壳运动的GPS观测与构造活动模拟

利用首都圈地区1992～2004年间280多个GPS点位复测资料,获得了该地区高精度的地壳形变速度场,相对欧亚板块的水平速度场由北向南由4 mm/a逐渐增加到9 mm/a;采用边界元(BEM)理论及位移不连续的多边形元素构建断层的三维模型,并利用均匀介质且各向同性的半无限线弹性空间模型反演计算了断层滑移量,模拟了GPS点位的位移场,在此基础上获得了主要活动断层和首都圈地区的地表、地表下15 km和25 km剖面的静态位移场、应力及应变场.结果表明,GPS点位的模拟位移场与观测值在南北向和东西向的误差分别为0.68 mm及0.77 mm,各个主要活动断层在1992～2004年间的构造活动较弱,随着深度的增加,剖面的应变逐渐增加.     

电子政务空间信息服务应用模型的适用性评价

在总结国内外相关模型评价方法和分析电子政务空间信息服务应用模型的基础上,提出一种基于多层次、可扩展评价指标体系的适用度评价模型,并给出适用度计算的方法和流程。最后,以三种地震灾害评估模型在震灾评估中的应用为例对其进行基于适用度的模型适用性评价。