In-Situ Observation of Fluid Mud in the North Passage of Yangtze Estuary, China

Observations of fluid mud were made in the lower North Passage of the Yangtze Estuary in February 2000, on 10 -11 August 2000, on 30 - 31 August 2000 (after two strong typhoons), on 21 - 24 August 2000 (neap tide) and on 3 -6 September 2000 (mean tide) respectively. In situ data show that the fluid mud in this area consists of fine cohesive sediment (median size 7.23 μm). The formation and movement of fluid mud varied during the neap-spring and flood-ebb tidal cycle. Observations suggest that fluid mud phenomena in this area may be categorised in a three-fold manner as slack water, storm and saltwedge features. The thickness of the fluid mud layer of slack water during the neap tide ranged from 0.2 to 0.96 m, whereas during the mean tide, the thickness ranged from 0.17 to 0.73 m, and the thickness of the fluid mud layer was larger during slack water than at the flood peak. Shoals cover an area of 800 km^2 with a water depth smaller than 5 m. Erosion of these extensive intertidal mudflats due to storm action provides an abundant sediment source. This is particularly significant in this estuary when the tidal level is lower than 5 m. The lower North Passage is a typical zone of saltwater wedging, so the saltwedge fluid mud has the most extensive spatial range in the estuary.     

深圳大鹏湾表层沉积物碎屑矿物空间分布特征

立足样品测试数据,利用空间分析、空间插值、地质统计以及景观生态学方法,深入分析了深圳大鹏湾表层沉积物碎屑矿物的空间分布特征,并使用球状模型对相应半变异函数进行理论建模。结果表明,碎屑矿物分布的Hurst分维数为0.28～0.97,空间几何分维数为1.03～1.72;Moran Ⅰ型空间自相关系数-0.15～0.53。在此基础上,以等值线分布所包围范围作为划分尺度,以Shannon-Wiener信息指数作为度量,得到的矿物分布所反映出的信息量或者富集程度指数为0.88～1.85。     

碳水化合物的组合合成

碳水化合物的组合合成是一项新兴技术，该技术可以在短时间内合成大量用于进行生物活性筛选的寡糖及拟糖物。液相与固相合成技术可以极大地加快药物研究与开发进程。作者针对该技术在碳水化合物合成方面的研究进展情况进行讨论。     

Analysis of Offshore Oil Pipeline Floating Laying

-Based on the calculation model for the floating laying of the offshore oil pipeline, this paper analyses in detail the internal force, and deformation of the pipeline under a definite structural form (pipeline and buoy) and the way of pulling. The obtained results can be used for the buoy deployment, structure design, and the determination of pulling parameters (the pulling force of the cable and its length, etc.), providing an effective analysis method for floating pipeline-laying. A calculation example is given to show the related calculation process and the main results are analyzed and discussed.     

Theory and Practice of Soft Clay Engineering

-The shear strength and deformation properties of soft clay are discussed first. Then some methods for predicting the performance of soft clay foundation are proposed. Finally, case histories are presented to illustrate some discussed aspects of soft clay.     

The Effect of Internal Fluid on the Response of Vortex-Induced Vibration of Marine Risers

Based on Iwan‘s wake oseillator model developed with the classical van der Pol equalion, the differential equation for the response of the vortex-induced vihration (VIV) of the riser considering the effect of the internal flowing fluid and the external marine environmental condition is derived. The effect of the intermal flowing fluid on the response of VIV of the riser is studied by means of the Finite Element Method. The results show that the effect of the internal fluid velocity on the VIV of the riser is strong when the natural frequency of the riser is close to the vortex shedding frequency. In addition, the increase of the top tension can decrease the sensitivity of the riser to the internal fluid velocity.     

Investigation on the Deposition in an Excavated Trough at the East Shore of Jiaozhou Bay, China

- Based on field investigations, this paper analyzes three types of harbour basinns and navigation channel excavated on seabed in Jiaozhou Bay, get a general rule of deposition for excavated trough, it found that pollution is one of crucial factors resulting in the deposition of the excavated trough in the east shore of Jiaozhou Bay. With these results, it predicted the annual deposition thickness for the excavated trough and disclosed the fact that it can't be deposited deadly during one storm. At the same time, with two-dimensional numerical model, it studied the effects of the excavated trough and the reclamation near shore on tidal cureent and said that the excavated trough can decrease the current velocity passing through the trough about 10- 15%, but only limited inside and near the trough and there are no effect on other regions; reclamation can cut off the pollution sources and no obvious effect on the currents of the Jiaozhou Bay. Connecting the deep trough and Cangkou tidal channel with a new     

莱州湾东部滨海水域砂金分布特征

通过对莱州湾东部滨海水域地球物理和地质钻综合调查，业已查明该海区地质的构造和古地理环境特征，并发现区内砂金分布较普遍，本文从砂金分布的地貌单元，沉积物类型，砂金成因类型，物质来源，古气候，构造作用，砂金成因等诸方面，研究了该海域内砂金特征。     

Study on “J”Type Offshore Pipeline-Laying Method

-Considering both the seabed foundation and wave, an analytic model of "J" type is proposed for offshore pipeline-laying. The governing differential equation is also obtained for the pipeline on the seabed and for the suspension sections. By utilizing weighted- residual method and dual iteration technique, an approximate solution is obtained, too. In the end, calculation examples are given for analyzing the changeable relationship among the major parameters.     

Design of Mooring System for Oil Storage Vessels

The floating oil storage system has been proposed as a new facility for Strategic Petroleum Reserve (SPR) in China. Mooring is one of the key technologies to ensure the safety, reliability, and performance of the oil storage system. This paper describes the concept, analysis, design and reliability of the mooring system. For mooring system design of these oil vessels, analysis is essential of the behavior of the vessel in connection with mooring facilities of nonlinear resilience. A nonlinear mathematical model for analyzing a moored vessel is established and solved. Some results of numerical simulations are presented. Assessment of the safety regarding the mooring system in terms of failure probability is carried out. Another simulation model for calculating the failure probability of the mooring system is proposed. The design parameters that have an influence on the characteristics of the failure probability have been identified. The simulation results show that the mooring system has an annual reliab