Double-planed deep seismic zone and anomalous structure in the upper mantle beneath northeastern Honshu (Japan)

Seismicity located by using the most recent data obtained from the high-gain seismograph network of Tohoku University shows that the deep seismic zone beneath northeastern Honshu, Japan, is composed of two thin planes which are parallel to each other and are 30–40 km apart. Focal mechanisms derived from the earthquakes in the upper plane are reverse-faulting, or, some of them, down-dip compression. As a contrast, those in the lower plane are down-dip extension. The location of the upper boundary of the descending lithospheric slab, inferred from the arrival-time difference between ScS and ScSp waves and from the travel-time anomaly of intermediate-depth earthquakes observed at the small-scale seismic array, coincides exactly with the upper plane of the double-planed deep seismic zone. Anelasticity (1/Q) structure of the upper mantle consists of three distinct zones: a high-Q (Qs− 1500) inclined lithospheric slab, an intennediate-Q (Qs−350) land-side mantle between the Pacific coast and the volcanic front, and a low-Q (Qs − 100) land-side mantle between the volcanic front and the coast of the Japan Sea.The evidence obtained here provides valuable information as to the definition of the type of mechanism producing the plate motion beneath island arcs.     

Experimental study of the alteration process of labradorite in acid hydrothermal solutions

Labradorite was altered artificially by HC1 solution ranging from M = 1 to M = 0.003 at 245 and 230°C. The products of alteration were examined by X-ray diffraction, electron microscopy, electron diffraction, infrared spectroscopy and the electron microprobe and the solution was analyzed chemically.Amorphous silica only was formed in solutions with M_HCl = 1 and M_HCl = 0.3. In a solution with M_HCl = 0.2, amorphous silica was initially formed, later dissolved and replaced by kaolinite. A mixture of microcrystalline boehmite and amorphous aluminosilicate was formed, altering to kaolinite in solutions with M_HCl = 0.1 and 0.3. Small amounts of kaolinite were initially formed but the alteration soon stopped in solution with M_HCl = 0.003. Relationships between the alteration processes and pH of the solutions can be roughly explained by using solubility diagrams assuming the congruent dissolution of labradorite and precipitation of the products in partial equilibrium. However, these assumptions are not valid with strongly acid solutions.The rate of dissolution of labradorite is controlled not only by its surface area, but also by the diffusion of matter through the layer of alteration products.     

Chromite-bearing spessartites from Kasuga-mura,Japan, and their bearing on possible mantle origin andesite

An unusual association of chromite and hornblende was found in the spessartites of andesite composition, occurring as a dike swarm associated with a Cretaceous granite batholith. The spessartites are largely porphyritic with phenocrysts of either hornblende or augite. One dike, comprising a finegrained spessartite, exhibits distinct chilled selvages of aphanitic facies. The chromites in the fine-grained and augite-spessartites are significantly higher in Cr/ (Cr+Al) than those occurring rarely as inclusions in the phenocrystic hornblendes in the hornblende spessartite, although both are similar in Mg/ (Mg+Fe), Fe₂O₃, and TiO₂. The phenocrystic hornblendes are titaniferous pargasite with high Mg/ (Mg+Fe), and differ in their higher octahedral Al from the groundmass hornblendes including those in the fine-grained spessartite. The crystallization sequence in the phenocrystic hornblende-bearing spessartites is Al-rich chromite, phenocrystic hornblende, and plagioclase without pyroxene, suggesting a high water content in the magma and the start of the crystallization at relatively high pressures. The finegrained spessartite from which the porphyritic spessartites have been derived by fractionation of dominant mafic minerals, has the high Mg-value and Cr content equivalent to those in primitive, undifferentiated basalts, although still andesitic in SiO₂ content. Chemically similar magnesian andesites, although uncommon, found in some orogenic calc-alkalic suites may represent a magma composition in equilibrium with mantle peridotite under the condition of high water pressures.     

Anomalous thermal expansion in spinel MgAl2O4

The accurate measurement of thermal expansion in spinel MgAl₂O₄ over a temperature range between 30° C and 900° C has revealed an anomalous behaviour indicating a possible presence of a second order phase transition at 660° C.     

Cluster analysis on the bulk elemental compositions of Antarctic stony meteorites

Remote sensing observations by recent successful missions to small bodies have revealed the difficulty in classifying the materials which cover their surfaces into a conventional classification of meteorites. Although reflectance spectroscopy is a powerful tool for this purpose, it is influenced by many factors, such as space weathering, lighting conditions, and surface physical conditions (e.g., particle size and style of mixing). Thus, complementary information, such as elemental compositions, which can be obtained by X‐ray fluorescence (XRF) and gamma‐ray spectrometers (GRS), have been considered very important. However, classifying planetary materials solely based on elemental compositions has not been investigated extensively. In this study, we perform principal component and cluster analyses on 12 major and minor elements of the bulk compositions of 500 meteorites reported in the National Institute of Polar Research (NIPR), Japan database. Our unique approach, which includes using hierarchical cluster analysis, indicates that meteorites can be classified into about 10 groups purely by their bulk elemental compositions. We suggest that Si, Fe, Mg, Ca, and Na are the optimal set of elements, as this set has been used successfully to classify meteorites of the NIPR database with more than 94% accuracy. Principal components analysis indicates that elemental compositions of meteorites form eight clusters in the three‐dimensional space of the components. The three major principal components (PC1, PC2, and PC3) are interpreted as (1) degree of differentiations of the source body (i.e., primitive versus differentiated), (2) degree of thermal effects, and (3) degree of chemical fractionation, respectively.     

A multi-proxy reconstruction of spatial and temporal variations in Asian summer temperatures over the last millennium

To investigate climate variability in Asia during the last millennium, the spatial and temporal evolution of summer (June–July–August; JJA) temperature in eastern and south-central Asia is reconstructed using multi-proxy records and the regularized expectation maximization (RegEM) algorithm with truncated total least squares (TTLS), under a point-by-point regression (PPR) framework. The temperature index reconstructions show that the late 20th century was the warmest period in Asia over the past millennium. The temperature field reconstructions illustrate that temperatures in central, eastern, and southern China during the 11th and 13th centuries, and in western Asia during the 12th century, were significantly higher than those in other regions, and comparable to levels in the 20th century. Except for the most recent warming, all identified warm events showed distinct regional expressions and none were uniform over the entire reconstruction area. The main finding of the study is that spatial temperature patterns have, on centennial time-scales, varied greatly over the last millennium. Moreover, seven climate model simulations, from the Coupled Model Intercomparison Project Phase 5 (CMIP5), over the same region of Asia, are all consistent with the temperature index reconstruction at the 99 % confidence level. Only spatial temperature patterns extracted as the first empirical orthogonal function (EOF) from the GISS-E2-R and MPI-ESM-P model simulations are significant and consistent with the temperature field reconstruction over the past millennium in Asia at the 90 % confidence level. This indicates that both the reconstruction and the simulations depict the temporal climate variability well over the past millennium. However, the spatial simulation or reconstruction capability of climate variability over the past millennium could be still limited. For reconstruction, some grid points do not pass validation tests and reveal the need for more proxies with high temporal resolution, accurate dating, and sensitive temperature signals, especially in central Asia and before AD 1400.     

Re-Os geochronology of the Iimori Besshi-type massive sulfide deposit in the Sanbagawa metamorphic belt, Japan

Besshi-type Cu deposits are strata-bound volcanogenic massive sulfide deposits usually associated with mafic volcanic rocks or their metamorphic equivalents. Although there are numerous Besshi-type deposits in the Sanbagawa metamorphic belt, Japan, their tectonic settings and depositional environments remain controversial because of a lack of depositional age constraints. We report Re-Os data for the Iimori deposit, one of the largest Besshi-type deposits in western Kii Peninsula, in order to examine the robustness of the Re-Os isotope system for dating sulfide minerals in the high-P/T metamorphic belt and to elucidate the primary depositional environment of the Iimori sulfide ores. An 11-point Re-Os isochron plot yields an age of 156.8 ± 3.6 Ma. As this Re-Os isochron age is significantly older than the timing of the Sanbagawa peak metamorphism (110-120 or ∼90 Ma) and a well-defined isochron was obtained, the Re-Os age determined here is most likely the primary depositional age. Despite high-grade metamorphism at up to 520 ± 25 °C and 8-9.5 kbar, the Re-Os isotope system of the Iimori sulfides was not disturbed. Hence, we consider that the whole-rock Re-Os closure temperature for the Iimori sulfide ores was probably higher than 500 °C. As the accretion age of the Sanbagawa metamorphic belt is considered to be 120-130 or 65-90 Ma on the basis of radiolarian and radiometric ages, we estimated the time from the Iimori sulfide deposition on the paleo-seafloor to its accretion at the convergent plate boundary to be greater than 25 Myr. Consequently, the depositional environment of the Iimori sulfide ores was not in the marginal sea, but was truly pelagic.     

Japanese early-warning for debris flows and slope failures using rainfall indices with Radial Basis Function Network

Early-warning systems for natural disasters are important tools for disaster risk reduction and for achieving sustainable development and livelihoods. In 2005, the Japanese government initiated a new nationwide early-warning system for landslides disasters. The main methodology of the system is to set a criterion for occurrences of debris flows and slope failures based on several rainfall indices (60-min cumulative rainfall and soil–water index) in each 5-km grid mesh covering all of Japan. Because many of the records of mass movements are lacking in scientific precision on timing and location, the system applies Radial Basis Function Network methods to set the criterion based primarily on rainfall data recorded as not triggering disasters. Since the end of March 2007, under torrential rainfall conditions, early-warning information has been disseminated as part of weather news using TV, radio, and the Internet. Because of the increasing worldwide recognition of the importance of early-warning systems for natural disaster reduction, the aim of this article is to introduce the new Japanese early-warning system to the international landslide community. In this article, the method, the system, and the result of its application to landslide disasters in 2009 are presented.     

Metaproteomic characterization of dissolved organic matter in coastal seawater

We performed a comprehensive metaproteomic analysis of the dissolved organic matter (DOM) in Japanese coastal waters using liquid chromatography–tandem mass spectrometry and demonstrated that these proteomes were characterized by proteins with various functions, including metabolic enzymes, membranes, and photosynthetic proteins. The protein sources included cyanobacteria, heterotrophic bacteria, and eukaryotic phytoplankton. Most of the components were similar among samples and also similar to pelagic components. We also observed differences in the compositions of the microbial communities of origin among the different dissolved protein samples and differences in the relative abundance of specific dissolved protein types (e.g., cytoskeletal proteins), possibly indicating potential dynamics in the coastal DOM pool.