Application of the normalized surface magnetic charge model to UXO discrimination in cases with overlapping signals

This paper presents an application of the normalized surface magnetic charge (NSMC) model to discriminate objects of interest, such as unexploded ordnance (UXO), from innocuous items in cases when UXO electromagnetic induction (EMI) responses are contaminated by signals from other objects. Over the entire EMI spectrum considered here (tens of Hertz up to several hundreds of kHz), the scattered magnetic field outside the object can be produced mathematically by equivalent magnetic charges. The amplitudes of these charges are determined from measurement data and normalized by the excitation field. The model takes into account the scatterer's heterogeneity and near- and far-field effects. For classification algorithms, the frequency spectrum of the total NSMC is proposed and investigated as a discriminant. The NSMC is combined with the differential evolution (DE) algorithm in a two-step inversion procedure. To illustrate the applicability of the DE–NSMC algorithm, blind test data are processed and analyzed for cases in which signals from nearby objects frequently overlap. The method was highly successful in distinguishing UXO from accompanying clutter.     

Determination of vertical displacements over the coastal area of Korea due to the ocean tide loading using GPS observations

This paper describes the GPS applicability for detecting the vertical displacements of ground stations caused by ocean tide loading effects. An experiment was carried out using 12 permanent GPS stations located in the coastal area of Korea using data in the period 1 July until 26 August 2003. The relative height differences were calculated from hourly DGPS data processing based on the carrier-phase observation. The power spectra of the M₂ and N₂ constituents of ocean tide loading were derived using the CLEAN algorithm. The differential vertical displacements generated by the ocean tide loading effect are typically 3–25 mm in coastal area of the Korea. We compared the results from GPS with those of the ocean tide models, NAO.99Jb regional model and GOT00.2, FES99 global models. The M₂ (N₂) amplitude differences of vertical displacements between GPS and GOT00.2 is 1.22 ± 3.61 mm (1.01 ± 1.48 mm), and that of the M₂ (N₂) amplitude difference between GPS and FES99 is 0.04 ± 4.64 mm (0.64 ± 1.75 mm), whereas the M₂ (N₂) amplitude difference between GPS and NAO.99Jb are 0.05 ± 1.03 mm (0.86 ± 1.18 mm). The highest vertical displacements at the PALM station are found for 24.5 ± 0.7 mm from GPS observation, and 22.9 mm from the regional model NAO.99Jb and 13.17 and 10.00 mm from the global models GOT00.2 and FES99, respectively. These values show that the vertical displacements derived from GPS are in good agreement with those of the regional model NAO.99Jb around Korea, more than with the global models. This result indicated that GPS is an effective tool to measure the vertical displacement caused by the ocean tide loading effect in the coastal area, and we need to use the NAO.99Jb ocean tide model rather than the global ocean tide models in and around the Korean peninsula for position determination with permanent GPS installations. This work demonstrates that vertical displacement caused by the M₂ and N₂ constituents of ocean tide loading can be measured by carrier-phase DGPS.     

Fhe application of electromagnetic-induction on the measurement of sea ice thickness in the Antarctic

As an important component of the cryosphere, sea ice is very sensitive to climate change. The study of sea ice physics needs accurate sea ice thickness. This paper presents an electromagnetic induction （EM） technique which can be used to measure the sea ice thickness distribution efficiently and its successful application in the Antarctic Neila Fjord. Based on the electrical properties of sea ice and seawater and the application of electromagnetic field theory, this technique can accurately detect the distance between the EM instrument and the ice/water interface to measure the sea ice thickness. Analyzing the apparent conductivity data obtained by the electromagnetic induction technique and drill-hole measurements at same location allows the construction of a transform equation for the apparent conductivity and sea ice thickness. The verification of the calculated sea ice thickness using this equation indicates that the electromagnetic induction technique is able to determine reliable sea ice thickness with an average relative error of only 5.5%. The ice thickness profiles show the sea ice distribution in Neila Fjord is basically level with a thickness of 0.8 - 1.4 m.     

南方海相地震资料脊波非线性阈值去噪方法

小波分析方法在数据处理中已得到成功广泛的应用,这主要得益于它的局部时频分析能力,但是小波分析对方向的表征能力有限。脊波变换具备优越的方向选择性能,能更好地处理含有线状变化特征的信号。本文针对低信噪比地震记录,尝试研究利用脊波变换方法对其进行处理,提高剖面资料信噪比,突出同相轴信息。在对南方某油田的实际地震资料的处理中,可以发现处理后的地震剖面同相轴品质及连续性有了明显改善,信噪比增强,分辨率相应提高,体现出了该方法相对常规小波分析方法的优越性。     

Geochemistry and spatial distribution of OIB and MORB in A’nyemaqen ophiolite zone: Evidence of Majixueshan ancient ridge-centered hotspot

The mafic volcanic association is made up of OIB, E-MORB and N-MORB in the A'nyemaqen Paleozoic ophiolites. Compared with the same type rocks in the world, the mafic rocks generally display lower Nb/U and Ce/Pb ratios and some have Nb depletion and Pb enrichment. The OIB are LREE-enriched with (La/Yb)N =5―20, N-MORB are LREE-depleted with (La/Yb)N = 0.41―0.5. The OIB are featured by incompatible element enrichment and the N-MORB are obviously depleted with some metasomatic effect, and E-MORB are geochemically intermediated. These rocks are distributed around the Majixueshan OIB and gabbros in a thickness greater than a thousand meters and transitionally change along the ophiolite extension in a west-east direction, showing a symmetric distribution pattern as centered by the Majixueshan OIB, that is, from N-MORB, OIB and E-MORB association in the Dur'ngoi area to OIB in the Majixueshan area and then to N-MORB, OIB and E-MORB assemblage again in the Buqingshan area. By consideration of the rock association, the rock spatial distribution and the thickness of the mafic rocks in the Majixueshan, coupled with the metasomatic relationship between the OIB and MORB sources, it can be argued that the Majixueshan probably corresponds to an ancient hotspot or an ocean island formed by mantle plume on the A'nyemaqeh ocean ridge, that is the ridge-centered hotspot, tectonically similar to the present-day Iceland hotspot.     

The mean value concept in mono-linear regression of multi-variables and its application to trace studies in geosciences

The "mean value concept" in a mono-linear regression of multi-variables is clarified.Its applications to reconstruction of the past 90-year salinity of the sea surface water in Xisha Islands and to tracing the past 80 ka paleo-geomagnetic events from the Luochuan loess 10Be record are introduced in detail,which show the significance and the potential of the "mean value concept" in geoscience research.     

Experimental study of surface texture and resonance mechanism of booming sand

The sound-producing mechanism of booming sand has long been a pending problem in the blown sand physics. Based on the earlier researches, the authors collected some silent sand samples from Teng- ger Desert, Australian Desert, Kuwait Desert, beaches of Hainan Island and Japanese coast as well as the soundless booming sand samples from the Mingsha Mountain in Dunhuang to make washing ex- periments. In the meantime the chemical corrosion experiment of glass micro-spheres, surface coating experiment and SEM examination were also conducted. The experimental results show that the sound production of booming sand seems to have nothing to do with the presence of SiO2 gel on the surface of sand grains and unrelated to the surface chemical composition of sand grains but is related to the resonance cavities formed by porous (pit-like) physical structure resulting from a number of factors such as wind erosion, water erosion, chemical corrosion and SiO2 gel deposition, etc. Its resonance mechanism is similar to that of Hemholz resonance cavity. Under the action of external forces, nu- merous spherical and sand grains with smooth surface and porous surface are set in motion and rub with each other to produce extremely weak vibration sound and then become audible sound by human ears through the magnification of surface cavity resonance. However the booming sands may lose their resonance mechanism and become silent sand due to the damping action caused by the invasion of finer particles such as dust and clay into surface holes of sand grains. Therefore, clearing away fine pollutants on the quartz grain surface is an effective way to make silent sand emit audible sound.     

Robust H∞ control for aseismic structures with uncertainties in model parameters

This paper presents a robust H∞ output feedback control approach for structural systems with uncertainties in model parameters by using available acceleration measurements and proposes conditions for the existence of such a robust output feedback controller. The uncertainties of structural stiffness, damping and mass parameters are assumed to be norm-bounded. The proposed control approach is formulated within the framework of linear matrix inequalities, for which existing convex optimization techniques, such as the LMI toolbox in MATLAB, can be used effectively and conveniently. To illustrate the effectiveness of the proposed robust H∞ strategy, a six-story building was subjected both to the 1940 El Centro earthquake record and to a suddenly applied Kanai-Tajimi filtered white noise random excitation. The results show that the proposed robust H∞ controller provides satisfactory results with or without variation of the structural stiffness, damping and mass parameters.     

Determining the size of spatial clusters in focused tests: Comparing two methods by means of simulation in a GIS

 Based on a four-point evaluation system consisting of accuracy, consistency, power, and chance to commit type I errors, this study compares Tango's minimum p (MinP) and Stone's maximum relative risk (MaxRR) methods for detecting focused cluster size through simulations in GIS. It reveals that the MinP method is more effective than the MaxRR method. The MinP method exhibits higher levels of accuracy and consistency; and its power and chance to commit type I errors are similar to the MinP method. The MaxRR method has a tendency to underestimate the cluster size, while the MinP method tends to overestimate the cluster size, particularly when the clusters are relatively big and have high relative risk levels. In addition, the MinP method seems to be most effective in revealing the size of clusters when clusters are neither too strong nor too weak. The lowest detection rates for clustering occur when the clustering signal is relatively weak, which is easily understandable. In practice, it might be useful to use both the methods to estimate a range of possible cluster sizes, where the MaxRR method indicates the lower estimate, while the MinP method gives the higher estimate of the cluster size. Received: 24 August 2002 / Accepted: 20 December 2002