关于辽宁地区b值方法定量预测的研究

本文利用地震学分析预报方法程式指南和“八五”攻关成果中提出的地震b值定量预测方法,对辽宁及邻区1969年以来发生的8次地震震例作了回顾性检验研究。在此基础上,根据震前b值的变化特征,总结出了可能适用于辽宁地区半年左右尺度的b值预测方法的异常羊别指标及预报规则。     

韧性剪切作用下千枚岩中SiO2的迁移模拟实验—以金山金矿为例

实验较好地模拟了韧性剪切作用过程中ＳｉＯ２“释放－局部迁移”的迁移过程。实验结果表明：４００℃条件下,绢云母,绿泥石等矿物在韧性剪切作用下分解,解释出大量ＳｉＯ２,在成矿流体的参与下发生局部迁移,聚集。要使ＳｉＯ２发生大规模的迁移,富集,还需要一个相对开放的环境（如脆性剪切变形）。     

超新星遗迹X射线研究

在此介绍我们基于ＡＳＣＡ 和ＲＯＳＡＴ 等Ｘ 射线天文卫星,对３Ｃ３９７ 、Ｇ３２７ ．１１ ．１ 、Ｇ２１ ．５０ ．９ 和ＲＸＪ１７１３ ．７３９４６ 等超新星遗迹的物理特性进行的分析,简要地讨论了３Ｃ３９７ 的非平衡电离双热分量和双极泡结构以及Ｇ３２７ ．１１ ．１ 和Ｇ２１ ．５０ ．９ 中隐匿脉冲星的性质,并提出ＲＸＪ１７１３ ．７３９４６ 和ＡＤ３９３ 客星之间可能的关系。     

区域重力场相对基准的建立

针对地震系统各区域重力网的现状,提出了一种在没有绝对重力测量资料的情况下,利用网区多年积累的观测资料,建立区域重力场相对基准的方法。实验证明,采用该方法建立的区域重力场相对基准,精度优于５０ｎｍ·ｓ－２,不仅有利于地震重力前兆信息的提取,而且能优化和评定区域重力网的质量,标定和检测重力仪参数及其变化。     

综合RS与GIS方法提取青藏高原冲川变化信息：以布喀塔格峰为例

冰川变化的常规观测方法在高原的大部分地区无法实施。遥感与地理信息系统技术的发展为研究冲川变化提供了有效的手段,本文以位于昆仑山脉中段的布喀塔格山峰冰川为例,利用１９７３年至１９９４年的ＲＢＶ,ＭＳＳ和ＴＭ遥感资料为信息源,综合目视判读与统计分析方法提取冰川界限,形成冰川边界图,并规一化坐标系统,以ＧＩＳ为工具分析该冲川群的变化情况,计算冲川进退变化速率。     

丹东地区中生代地层-古生物

丹东地区小岭组植物化石共9属12种。动物化石腹足类4属6种,叶肢介1属2种。均为首次发现。这些化石的发现为小岭组应属早白垩世而不属侏罗纪,提出了令人信服的证据。同时,阐述了古地理环境和地层特征,并与邻区进行了对比。     

A remote sensing model for monitoring soil evaporation based on differential thermal inertia and its validation

To develop geosciences quantification and multi-dimensional researches will be an inevitable trend in the 21st century. The interaction between the land surface and the atmosphere not only serves as an important component in geosciences quantification, bu…     

Diversification of skeletal microstructures of organisms through the interval from the latest Precambrian to the Early Cambrian

From the latest Precambrian to the Early Cambrian was the most important phase throughout the evolutionary history of life on the earth. The diversification of latest Precambrian multicellular organisms was obvious and some of them began to form primary s…     

Oxygen isotope compositions of quartz grains (4–16 μm) from Chinese eolian deposits and their implications for provenance

Oxygen isotope compositions were measured in quartz grains extracted from a 7.0 Ma red clay-loess sequence at Lingtai and six late Pleistocene loess sediments (Malan loess). Results show that the changes in oxygen isotope compositions of Malan loess are basically controlled by the geochemical characteristics of the source materials, while the effect of weathering process after dust deposition could be minor. The oxygen isotope distribution of quartz grains from red clay at Lingtai is similar to that of the overlying loess-paleosol sequence, thus indicating that the red clay at Lingtai has the same eolian origin as the loess-paleosol deposits. Furthermore, the oscillations of the isotope compositions in 4–16 μm-sized quartz grains may reflect the changes, to some extent, of the climatic systems of the source region.     

Lateral load pattern in pushover analysis

The seismic capacity curves of three types of buildings including frame, frame-shear wall and shear wall obtained by pushover analysis under different lateral load patterns are compared with those from nonlinear time history analysis. Based on the numerical results obtained a two-phase load pattern; an inverted triangle (first mode) load pattern until the base shear force reachesβ times its maximum value, V_max, followed by a (x/H)^α form, hereβ and α being some coefficients depending on the type of the structures considered, is proposed in the paper, which can provide excellent approximation of the seismic capacity curve for low-to-mid-rise shear type buildings. Furthermore, it is shown both the two-phase load pattern proposed and the invariant uniform pattern can be used for low-to-mid-rise shear-bending type and low-rise bending type of buildings. No suitable load patterns have been found for high-rise buildings.