A grid-based tropospheric product for China using a GNSS network

Tropospheric delay accounts for one source of error in global navigation satellite systems (GNSS). To better characterize the tropospheric delays in the temporal and spatial domain and facilitate the safety-critical use of GNSS across China, a method is proposed to generate a grid-based tropospheric product (GTP) using the GNSS network with an empirical tropospheric model, known as IGGtrop. The prototype system generates the GTPs in post-processing and real-time modes and is based on the undifferenced and uncombined precise point positioning (UU-PPP) technique. GTPs are constructed for a grid form (\(2.0{^{\circ }}\times 2.5{^{\circ }}\) latitude–longitude) over China with a time resolution of 5 min. The real-time GTP messages are encoded in a self-defined RTCM3 format and broadcast to users using NTRIP (networked transport of RTCM via internet protocol), which enables efficient and safe transmission to real-time users. Our approach for GTP generation consists of three sequential steps. In the first step, GNSS-derived zenith tropospheric delays (ZTDs) for a network of GNSS stations are estimated using UU-PPP. In the second step, vertical adjustments for the GNSS-derived ZTDs are applied to address the height differences between the GNSS stations and grid points. The ZTD height corrections are provided by the IGGtrop model. Finally, an inverse distance weighting method is used to interpolate the GNSS-derived ZTDs from the surrounding GNSS stations to the location of the grid point. A total of 210 global positioning system (GPS) stations from the crustal movement observation network of China are used to generate the GTPs in both post-processing and real-time modes. The accuracies of the GTPs are assessed against with ERA-Interim-derived ZTDs and the GPS-derived ZTDs at 12 test GPS stations, respectively. The results show that the post-processing and real-time GTPs can provide the ZTDs with accuracies of 1.4 and 1.8 cm, respectively. We also apply the GTPs in real-time kinematic GPS PPP, and the results show that the convergence time of the PPP solutions is shortened. These results confirm that the GTPs can act as an efficient information source to augment GNSS positioning over China.     

POS辅助车载组合全景影像路面角点特征匹配算法

推荐了一种车载组合全景相机影像路面角点特征的匹配方法。路面到摄站的距离近,基高比大,是良好的区域网平差模型连接点,但是路面纹理匮乏,影像中存在移动物体和较为严重的尺度变化和仿射变形,难以匹配到正确的同名点。本文利用路面在一定范围内可近似为水平面的特点,根据相机与路面的距离确定近似路面,将影像路面角点投影到重叠影像,将同名点定位在一个小的矩形范围内;通过POS数据确定角点对应同名核线,矩形区域内距离核线最近的角点即为同名像点。本文匹配方法可获得一定数量的正确匹配同名点,显著降低了误匹配,内点率高,可以进一步精确估计像对间的基础矩阵,为其他地物的匹配提供了约束。     

开放式地理实体关系抽取的Bootstrapping方法

从网络文本中抽取地理实体间空间关系和语义关系要求高时效性和强鲁棒性。本文提出一种开放式地理实体关系的自动抽取方法,通过bootstrapping技术统计词语的词性、位置和距离特征来计算语境中词语权值,据此确定描述地理实体关系的关键词,最终组织成结构化实例,并使用百度百科和Stanford CoreNLP开展了试验。研究结果表明,本文方法能自动挖掘自然语言的部分词法特征,无须领域专家知识和大规模标注语料,适用于未知关系类型的信息抽取任务;较之经典的Frequency、TFIDF和PPMI频率统计方法,精度和召回率分别提升约5%和23%。     

927一期工程测图成果质量检验软件的设计与实现

简要阐述了927一期测图成果质量检验软件的总体设计思想和技术构架等情况,给出了软件研发的技术路线,对比了软件功能需求与研发实现间的关系,总体上对该软件进行了介绍。该软件已在927项目任务承担单位中得到广泛应用,并为做好国家重大测绘工程项目的质量控制提供了借鉴。     

Geographical impacts on social networks from perspectives of space and place: an empirical study using mobile phone data

Space and place are two fundamental concepts in geography. Geographical factors have long been known as drivers of many aspects of people’s social networks. But whether and how space and place affect social networks differently are still unclear. The widespread use of location-aware devices provides a novel source for distinguishing the mechanisms of their impacts on social networks. Using mobile phone data, this paper explores the effects of space and place on social networks. From the perspective of space, we confirm the distance decay effect in social networks, based on a comparison between synthetic social ties generated by a null model and actual social ties derived from real-world data. From the perspective of place, we introduce several measures to evaluate interactions between individuals and inspect the trio relationship including distance, spatio-temporal co-occurrence, and social ties. We found that people’s interaction is a more important factor than spatial proximity, indicating that the spatial factor has a stronger impact on social networks in place compared to that in space. Furthermore, we verify the hypothesis that interactions play an important role in strengthening friendships.     

Spatial representation in the social interaction potential metric: an analysis of scale and parameter sensitivity

The social interaction potential (SIP) metric measures urban structural constraints on social interaction opportunities of a metropolitan region based on the time geographic concept of joint accessibility. Previous implementations of the metric used an interaction surface based on census tracts and the locations of their centroids. This has been shown to be a shortcoming, as the metric strongly depends on the scale of the zoning system in the region, making it difficult to compare the SIP metric between metropolitan regions. This research explores the role of spatial representation in the SIP metric and identifies a suitable grid-based representation that allows for comparison between regions while retaining cost-effectiveness with respect to computational burden. We also report on findings from an extensive sensitivity analysis investigating the SIP metric’s input parameters such as a travel flow congestion factor and the length of the allowable time budget for social activities. The results provide new insights on the role of the modifiable areal unit problem in the computation of time geographic measures of accessibility.     

Generating GPS satellite fractional cycle bias for ambiguity-fixed precise point positioning

With the development of precise point positioning (PPP), the School of Geodesy and Geomatics (SGG) at Wuhan University is now routinely producing GPS satellite fractional cycle bias (FCB) products with open access for worldwide PPP users to conduct ambiguity-fixed PPP solution. We provide a brief theoretical background of PPP and present the strategies and models to compute the FCB products. The practical realization of the two-step (wide-lane and narrow-lane) FCB estimation scheme is described in detail. With GPS measurements taken in various situations, i.e., static, dynamic, and on low earth orbit (LEO) satellites, the quality of FCB estimation and the effectiveness of PPP ambiguity resolution (AR) are evaluated. The comparison with CNES FCBs indicated that our FCBs had a good consistency with the CNES ones. For wide-lane FCB, almost all the differences of the two products were within ±0.05 cycles. For narrow-lane FCB, 87.8 % of the differences were located between ±0.05 cycles, and 97.4 % of them were located between ±0.075 cycles. The experimental results showed that, compared with conventional ambiguity-float PPP, the averaged position RMS of static PPP can be improved from (3.6, 1.4, 3.6) to (2.0, 1.0, 2.7) centimeters for ambiguity-fixed PPP. The average accuracy improvement in the east, north, and up components reached 44.4, 28.6, and 25.0 %, respectively. A kinematic, ambiguity-fixed PPP test with observation of 80 min achieved a position accuracy of better than 5 cm at the one-sigma level in all three coordinate components. Compared with the results of ambiguity-float, kinematic PPP, the positioning biases of ambiguity-fixed PPP were improved by about 78.2, 20.8, and 65.1 % in east, north, and up. The RMS of LEO PPP test was improved by about 23.0, 37.0, and 43.0 % for GRACE-A and GRACE-B in radial, tangential, and normal directions when AR was applied to the same data set. These results demonstrated that the SGG FCB products can be produced with high quality for users anywhere around the world to carry out ambiguity-fixed PPP solutions.     

Assessing Performance of Tomo-SAR and Backscattering Coefficient for Hemi-Boreal Forest Aboveground Biomass Estimation

Tomo-SAR technique has been used for hemi-boreal forest height and further forest biomass estimation through allometric equation. Backscattering coefficient especially in longer wavelength (L- or P-band) is thought as a useful parameter for hemi-boreal forest biomass retrieval. The aim of this paper is to assess the performance of vertical backscattering power and backscattering coefficient for hemi-boreal forest aboveground biomass (AGB) estimation with airborne P-band data. The test site locates in southern Sweden called Remningstorp test site, and the in-situ forest AGB ranges from 14 t/ha to 245 t/ha at stand level. Multi-baseline P-band Pol-InSAR data in repeat-path mode collected during March and May in 2007 at Remningstorp test site was used. We found that the correlation coefficient (R) between backscattering coefficient of P-band HH polarization and the in-situ forest biomass reached 0.87. The R for P-band VV backscattering power at 5 m is 0.71 and 10 m is 0.72. Backscattering coefficient in HH polarization and vertical backscattering power at 5 m and 10 m were applied to construct a model for hemi-boreal forest AGB estimation by backward step-wise regression and cross-validation approach. The results showed that the estimated forest AGB ranges from 19 to 240 t/ha, and the constructed model obtained a higher R and smaller RMSE, the value of R is 0.91, RMSE is 30.43 t/ha at Remningstorp test site.     

Approach to calculating spatial similarity degrees of the same river basin networks on multi-scale maps

Obtaining spatial similarity degrees among the same objects on multi-scale maps is of importance in map generalization. This paper firstly defines the concepts of ‘map scale change’ and ‘spatial similarity degree’; then it proposes a model for calculating the spatial similarity degree between a river basin network at one scale and its generalized version at another scale. After this, it validates the new model and gets 16 points in the model validation process. The x-coordinate and y-coordinate of each point are map scale change and spatial similarity degree, respectively. Last, a formula for calculating spatial similarity degree taking map scale change as the only variable is obtained by the curve fitting method. The formula along with the model can be used to automate the algorithms for simplifying river basin networks.     

Identifying geospatial services across heterogeneous taxonomies

Geospatial services with different functions are assembled together to solve complex problems. Different taxonomies are developed to categorize these services into classes. As differences in granularity and semantics exist among these taxonomies, the identification of services across different taxonomies has become a challenge. In this paper, an approach to identify geospatial services across heterogeneous taxonomies is proposed. Using formal concept analysis, existing heterogeneous taxonomies are decomposed into semantic factors and their various combinations. With these semantic factors, a super taxonomy is established to integrate the original heterogeneous taxonomies. Finally, with the super taxonomy as a cross-referencing system, geospatial services with classes in original taxonomies are identifiable across taxonomies. Experiments in service registries and a social media-based spatial-temporal analysis project are presented to illustrate the effectiveness of this approach.