Enhanced bioremoval of refractory compounds from dyeing wastewater using optimized sequential anaerobic/aerobic process

The upflow anaerobic sludge blanket process followed by the biological aerated filter process was employed to improve the removal of color and recalcitrant compounds from real dyeing wastewater. The highest removal efficiency for color was observed in the anaerobic process, at 8-h hydraulic retention time, seeded with the sludge granule. In the subsequent aerobic process packed with the microbe-immobilized polyethylene glycol media, the removal efficiency for chemical oxygen demand increased significantly to 75 %, regardless of the empty bed contact time. The average influent non-biodegradable soluble chemical oxygen demand was 517 mg/L, and the average concentration in effluent from the anaerobic reactor was 363 mg/L, suggesting the removal of some recalcitrant matters together with the degradable ones. The average non-biodegradable soluble chemical oxygen demand in effluent from the aerobic reactor was 87, 93, and 118 mg/L, with the removal efficiency of 76, 74, and 67 %, at 24-, 12-, and 8-h empty bed contact time, respectively. The combined anaerobic sludge blanket and aerobic cell-entrapped process was effective to remove the refractory compounds from real dyeing wastewater as well as in reducing organic loading to meet the effluent discharge limits. This integrated process is considered an effective and economical treatment technology for dyeing wastewater.     

Constraints on the thermal evolution of continental lithosphere from U-Pb accessory mineral thermochronometry of lower crustal xenoliths,southern Africa

U-Pb isotopic thermochronometry of rutile, apatite and titanite from kimberlite-borne lower crustal granulite xenoliths has been used to constrain the thermal evolution of Archean cratonic and Proterozoic off-craton continental lithosphere beneath southern Africa. The relatively low closure temperature of the U-Pb rutile thermochronometer (~400-450 °C) allows its use as a particularly sensitive recorder of the establishment of "cratonic" lithospheric geotherms, as well as subsequent thermal perturbations to the lithosphere. Contrasting lower crustal thermal histories are revealed between intracratonic and craton margin regions. Discordant Proterozoic (1.8 to 1.0 Ga) rutile ages in Archean (2.9 to 2.7 Ga) granulites from within the craton are indicative of isotopic resetting by marginal orogenic thermal perturbations influencing the deep crust of the cratonic nucleus. In Proterozoic (1.1 to 1.0 Ga) granulite xenoliths from the craton-bounding orogenic belts, rutiles define discordia arrays with Neoproterozoic (0.8 to 0.6 Ga) upper intercepts and lower intercepts equivalent to Mesozoic exhumation upon kimberlite entrainment. In combination with coexisting titanite and apatite dates, these results are interpreted as a record of postorogenic cooling at an integrated rate of approximately 1 °C/Ma, and subsequent variable Pb loss in the apatite and rutile systems during a Mesozoic thermal perturbation to the deep lithosphere. Closure of the rutile thermochronometer signals temperatures of 𙠂 °C in the lower crust during attainment of cratonic lithospheric conductive geotherms, and such closure in the examined portions of the "off-craton" Proterozoic domains of southern Africa indicates that their lithospheric thermal profiles were essentially cratonic from the Neoproterozoic through to the Late Jurassic. These results suggest similar lithospheric thickness and potential for diamond stability beneath both Proterozoic and Archean domains of southern Africa. Subsequent partial resetting of U-Pb rutile and apatite systematics in the cratonic margin lower crust records a transient Mesozoic thermal modification of the lithosphere, and modeling of the diffusive Pb loss from lower crustal rutile constrains the temperature and duration of Mesozoic heating to 𙡦 °C for ₞ ka. This result indicates that the thermal perturbation is not simply a kimberlite-related magmatic phenomenon, but is rather a more protracted manifestation of lithospheric heating, likely related to mantle upwelling and rifting of Gondwana during the Late Jurassic to Cretaceous. The manifestation of this thermal pulse in the lower crust is spatially and temporally correlated with anomalously elevated and/or kinked Cretaceous mantle paleogeotherms, and evidence for metasomatic modification in cratonic mantle peridotite suites. It is argued that most of the geographic differences in lithospheric thermal structure inferred from mantle xenolith thermobarometry are likewise due to the heterogeneous propagation of this broad upper mantle thermal anomaly. The differential manifestation of heating between cratonic margin and cratonic interior indicates the importance of advective heat transport along pre-existing lithosphere-scale discontinuities. Within this model, kimberlite magmatism was a similarly complex, space- and time-dependent response to Late Mesozoic lithospheric thermal perturbation.     

Geochemistry of Brines from Salt Ore Deposits in Western Tarim Basin

In the geological evolution of the Tarim Basin, many transgressions and relictions happened. So there have been plentiful sources of salt. Moreover, because of uttermost drought, a lot of salt has been deposited. It is possible to find potash salt in this area. In our fieldwork, we have found salt and brine in western Tarim Basin. Based on a geological survey and the characteristics of sedimentary facies and paleogeography, this paper deals with the geochemical parameters and discusses the possibility of formation of potash salt in terms of the chemical analyses of samples collected from western Tarim Basin. Results of brine analysis lead to some conclusions: most of these salt brines have eluviated from very thick halite beds, mainly chloridetype salt and this kind of halite does not reach the stage of potash deposition in all aspects; WKSL (Wukeshalu) occupies a noticeable place, and we should attach importance to this district because there have been some indicators of the occurrence of potash deposits as viewed from the contents of Br and K. Finally, low Br contents are recognized in the Tarim Basin as a result of salt aggradation, and this point of view has been proved by the results of this experiment and the data available. It cannot depend upon the index of Br to judge the evolution stage of halite. We must look for other facies of potash except marine facies.     

Discovery of Ordovician–Silurian metamorphic monazite in garnet metapelites of the Alpine External Aiguilles Rouges Massif

The pre-Mesozoic, mainly Variscan metamorphic basement of the Col de Bérard area (Aiguilles Rouges Massif, External domain) consists of paragneisses and micaschists together with various orthogneisses and metabasites. Monazite in metapelites was analysed by the electron microprobe (EMPA-CHIME) age dating method. The monazites in garnet micaschists are dominantly of Variscan age (330–300 Ma). Garnet in these rocks displays well developed growth zonations in Fe–Mg–Ca–Mn and crystallized at maximal temperatures of 670°C/7 kbar to the west and 600°C/7–8 kbar to the east. In consequence the monazite is interpreted to date a slightly pressure-dominated Variscan amphibolite-facies evolution. In mylonitic garnet gneisses, large metamorphic monazite grains of Ordovician–Silurian (~440 Ma) age but also small monazite grains of Variscan (~300 Ma) age were discovered. Garnets in the mylonitic garnet gneisses display high-temperature homogenized Mg-rich profiles in their cores and crystallized near to ~800°C/6 kbar. The Ordovician–Silurian-age monazites can be assigned to a pre-Variscan high-temperature event recorded by the homogenised garnets. These monazite age data confirm Ordovician–Silurian and Devonian–Carboniferous metamorphic cycles which were already reported from other Alpine domains and further regions in the internal Variscides.     

Flow Characteristics of Cemented Paste Backfill

Cemented paste backfill (CPB) is primarily used for backfilling underground voids at George Fisher Mine (Mount Isa, Australia). The objective of this paper is to summarise the geotechnical characterisation of the tailings and the rheological properties of the CPB as determined from a laboratory testing program undertaken at James Cook University. Two binders were examined [a General Purpose cement and a slag blend cement] over a range of dosages from 0 to 6% and CPB mix solids content in the range of 72–78%. The slump tests were carried out using the standard cone (ASTM C 143) used for concrete and a cylinder with 110 mm (diameter) × 110 mm (height), whereas the yield stress was measured using a shear vane (Brookfield vane spindle V-73). The index characteristics of the tailings including the grain size distribution, liquid limit, plastic limit, specific gravity were determined as per ASTM standards. This paper will then discuss the interrelationships among the solid content, slump, saturated density and the yield stress of the CPB. It is shown that there is strong correlation between the two different slump test devices used in this study. The smaller cylindrical device appears to have good potential for slurries like mine tailings or dredged mud that have high water content for slump test. There is also strong inter-relationship among solid content, slump, yield stress, and bulk density. Increasing the solid content increases the bulk density and yield stress, but reduces the slump. While there is hardly any difference between the two binder types used in this study in terms of flow parameters, namely the yield stress and slump, the binder dosage has an effect. At any specific solid content, higher binder dosages lead to a drop in the slump and increase in the yield stress. The difference is more pronounced in dense slurries. It is also strongly believed that the trends and relationships developed in this study may be valuable for the other mining operations using CPB.     

Spatio-temporal trends of heavy metals and source apportionment in Tolo Harbour,Hong Kong

This study provided a picture of the spatial and temporal distributions of Cr, Co, Ni Cu, Zn, As, Cd and Pb in bottom sediments of Tolo Harbour. The concentrations of the eight heavy metals differed significantly between sites due to the poor tidal flushing in Tolo Harbour. The levels of Cu, Zn, Cd and Pb were generally enriched in sediments from inner Tolo Harbour, while sediments from outer Tolo Harbour (Tolo Channel) had higher levels of Cr, Co and Ni. The redox sensitive element arsenic showed no distinct spatial pattern in Tolo Harbour. The decreasing levels of Cu, Zn, Pb and Cd in sediments with increasing distance from land demonstrated a typical diffusion pattern from land to the direction of sea. Two hot spots of Cu, Zn, Pb and Cd in sediments were located near Tai Po and Sha Tin new town, indicating that Cu, Zn, Pb and Zn were from land-derived sources. The sites with relatively high levels of Cr, Co and Ni in sediments were located in areas close to waste spoil in sea floor. The natural and anthropogenic inputs from Sha Tin and Tai Po to Tolo Harbour were mostly responsible for Cu, Zn, Cd and Pb enrichment in sediments from inner Tolo Harbour. The waste spoil in sea floor was believed to contribute to the Cr, Co and Ni in outer Tolo Harbour. The results of correlation coefficient between the eight heavy metals showed that Cu, Zn, Cd and Pb were strongly positively correlated, and Cr, Co and Ni were also significantly correlated with each other. The best explanation of strong correlation was their similar source. As, however, is not well correlated with the other seven heavy metals. The average concentrations of Cu and Zn displayed general increasing trends from 1978 to 2006 in Tolo Harbour, while the mean levels of Cr and Pb displayed a substantial decrease from 1978 to 1987, then a slight increase after 1987. No distinct temporal trends of the concentrations of Ni and As were observed from 1978 due to the inconsecutive data. On the other hand, the increasing trends of Cr, Cu, Zn, Cd and Pb were observed since 1996.     

A new locality of palygorskite-rich clay from the southeastern Yucatán: a potential material source for environmental applications

A palygorskite unit was discovered in a road cut of undifferentiated Tertiary limestone between the villages of El Pariso and San Roman (18°49.309N, 88°37.861W) in the southeastern Yucatán Peninsula, Mexico. This is the southern most locality of a clay-rich sedimentary unit reported in the literature for the Tertiary carbonates of the Yucatán Peninsula. This occurrence indicates a much wider range of palygorskite-rich clay deposition than previously recognized. The lithology is 99% clay and 1% sand to silt size diagenetic quartz grains. The clay consists of approximately 85% palygorskite, 15% montmorillonite and trace amounts of titanium oxides. EDS analyses on palygorskite are largely consistent with sedimentary palygorskites from other coastal marine settings, however palygorskite has a low total Fe content (average = 0.40 wt% expressed as Fe₂O₃) compared to many other sedimentary palygorskites. Montmorillonite chemical compositions are typical and compared to the palygorskite have substantially higher Fe₂O₃ concentrations (average = 3.90 wt%). The low percentage of coarse grains in the lithology combined with a high proportion of palygorskite and lack of detrimental trace minerals suggest the deposit is of industrial grade; however, it has limited reserves (6,000 m³). The unit could be potentially used in a wide array of environmental applications which are needed in the region including liners for landfills and constructed wetlands. The unit is in a geographic location which would serve the expanding economy of the region. This resource has the potential to have great impact on the quality of the local environment and the economy of a region under great environmental threat.     

Large-scale Mechanical Redistribution of Orthopyroxene and Plagioclase in the Basement Sill, Ferrar Dolerites, McMurdo Dry Valleys, Antarctica: Petrological, Mineral-chemical and Field Evidence for Channelized Movement of Crystals and Melt

The Jurassic Ferrar dolerite sills of the McMurdo Dry Valleys,Antarctica represent the plumbing system for flood basalt eruptionsassociated with the breakup of Gondwana. Among the Ferrar sills,the 350–450 m thick cumulate-textured Basement Sill isdifferentiated into a Lower Marginal Zone (LMZ) gabbronorite,a thick Lower Zone (LZ) orthopyroxene–plagioclase orthocumulatepyroxenite, a strongly layered mela- to leuco-gabbronorite MiddleZone (MZ), a thick Upper Zone (UZ) gabbronorite with ferrogabbroicpods, and an Upper Marginal Zone (UMZ) gabbronorite. Texturesand mineral compositions in the LZ pyroxenite and MZ–UZgabbronorites are nearly identical, the main distinction beingthe greater relative proportion of plagioclase in the MZ–UZgabbronorites, and of pigeonite in the UZ. Most orthopyroxenein the LZ, MZ and UZ occurs as sub-euhedral, normally zonedprimocrysts, commonly with rounded plagioclase inclusions. Plagioclaseis usually sub-euhedral and normally zoned, but can containsodic cores interpreted to be xenocrystic. Orthopyroxene andfeldspar compositions thoughout the sill are generally fairlyuniform, and resemble the compositions of micro-phenocrystsin the chilled margins. We infer that the sill was filled bya c. 1250°C slurry of orthopyroxene + plagioclase phenocrystsor primocrysts that subsequently unmixed in response to buoyancyforces. The LZ websterite contains numerous anorthosite to gabbronoriteschlieren, veins and pipes (< 2 m diameter), which we interpretas fossil segregation channels. Textures and mineral compositionsin these felsic channels are very similar both to UZ and MZgabbronorites, and to the groundmass separating accumulatedorthopyroxene primocrysts in the LZ and MZ. We infer that plagioclase-charged,hydrous pore melt from the pyroxenite may have segregated, pooledand ascended through these conduits to feed growth of the UZgabbronorite. Detailed mapping shows that the pipes are separatedby about 15 m on average. Calculations suggest that this numberdensity of conduits could have drained the LZ cumulates of theirinterstitial melt + plagioclase in about 8 days. Sequences (eachc. 5–10 m thick) of layered leuco-gabbronorite in theMZ could represent intra-cumulate sills that formed from plagioclase-richslurries ascending in segregation channels. Fe–Ti-richpyroxenitic veins and pods (some pegmatitic) and an unusualcoarse-grained plagioclase facies occur at the contacts betweenmassive leuco-gabbronorite layers in the MZ. Discordant ferro-pegmatitepods and dykes occur throughout the UZ. We interpret these Fe-richpegmatoidal rocks as evolved residual melts expelled from thecompacting gabbronoritic cumulates of the MZ and UZ. KEY WORDS: Ferrar; cumulates; differentiation; Antarctica; layering     

The early Miocene (~25 Ma) volcanism in the northern Kyushu-Palau Ridge,enriched mantle source injection during rifting prior to the Shikoku backarc basin opening

The northern Kyushu-Palau Ridge (KPR), remnant conjugate arc of the Izu-Ogasawara (Bonin)-Mariana (IBM) active arc, is dominated by basalt-andesite except for the Komahashi-Daini Seamount where acidic plutonic rocks of 38 Ma were recovered. These mafic to intermediate volcanics are produced by the rifting volcanism in the proto-IBM arc associated with spreading of the Shikoku Basin. The HFSE and HREE contents and ratios of these volcanics indicate enriched source mantle composition compared to recent volcanic front. The LILE ratios exhibit similar characteristics to reararc volcanism of the recent Izu arc, and some enriched volcanics exhibit high abundance of sediment melt inputs. Based on these observations and compilations of the published data set, the replacement event of the wedge mantle under the IBM arc occurred two times. The first event occurred between 45 and 38 Ma, with Pacific type mantle being replaced by depleted Indian type mantle. The second event occurred between 36 and 25 Ma, enriched mantle flowed from reararc side. The slab component during the proto-IBM arc rifting was a similar characteristic to recent reararc volcanism of the Izu arc, and sediment melt added in a local area.     

Citizens as sensors: the world of volunteered geography

In recent months there has been an explosion of interest in using the Web to create, assemble, and disseminate geographic information provided voluntarily by individuals. Sites such as Wikimapia and OpenStreetMap are empowering citizens to create a global patchwork of geographic information, while Google Earth and other virtual globes are encouraging volunteers to develop interesting applications using their own data. I review this phenomenon, and examine associated issues: what drives people to do this, how accurate are the results, will they threaten individual privacy, and how can they augment more conventional sources? I compare this new phenomenon to more traditional citizen science and the role of the amateur in geographic observation.