The Global Distribution of Diapycnal Mixing and Mixing Coefficient Tensor in the Upper 2000m Ocean from Argo Observations

Diapycnal Mixing (DM) within the upper 2000m of the global ocean is calculated by a fine-scale parameterization using the multiyear-mean density gridded product that created by employing all the Argo float observations to date through the recently published equation of seawater TEOS-10. The geographic distribution of Argo-derived DM derived in this study is spatial-dependent and varies with latitude and depth. The magnitude and pattern of DM is favorably validated by comparisons with previous studies. Furthermore, the mixing coefficient tensor K is calculated and analyzed. Components of the tensor fitting for the geopotential coordinate models are also presented. It is found that the tensor components in horizontal direction, K_xx and K_yy, have similar magnitude and distribution pattern. In the vertical, K_zz is enhanced over regions with rough topography and strong wind (e.g., Westerly region), suggesting agreement with previous estimates. This work presents a scheme to estimate the DM and mixing coefficient tensor using Argo observations, and offers a useful Argo-based mixing product for the purpose of promoting the study and modeling of ocean circulation and other processes.     

HY-2A卫星雷达高度计数据的全球统计评价及质量分析

自HY-2A卫星发射以来,针对HY-2A卫星雷达高度计产品的交叉定标、真实性检验及质量评估工作一直在持续开展。本文主要以HY-2A卫星高度计第44周期的IGDR产品数据为例,通过使用全球分布图、二维直方图和每日均值统计的方法完成了与Jason-2IGDR产品的比对验证,同时对主要环境校正参数及地球物理产品的数据质量稳定性进行了分析,结果显示高度计产品数据质量较稳定,此外利用HY-2A卫星升降轨交叉点海面高度差、与Jason-2卫星交叉点海面高度差以及沿轨海平面异常数据分析的方法进行了HY-2A卫星高度计观测系统的性能评估,结果显示,HY-2A卫星海面高度精度约为7.48cm,精度接近Jason-2,能满足海洋应用与科学研究的需要。     

渤海风暴减水特征及其对深水航路影响的数值模拟

利用环渤海9个沿岸站近10a潮位资料分析渤海海域的风暴减水特征,结果表明:渤海年均出现50cm和100cm风暴减水分别超过30d和6d,每年的9月至翌年4月份风暴减水最为频繁;建立了一套精细化天文潮-风暴潮耦合模型用于渤海深水航路的潮位预报,各站天文潮模拟验证的平均均方根误差为18.5cm,由此计算得到航路代表点的潮汐特征值并作潮汐预报;后报模拟了近10a重大风暴减水过程,模拟与实测吻合较好,说明该耦合模型可为该航路的潮位预报提供有益参考。     

基于遗传小波神经网络的海底声学底质识别分类

分割海底声纳探测图像,提取单元特征向量进行主成份分析,选取均值、标准差、对比度、相关系数、能量及同质性作为训练特征向量,构建小波神经网络。利用遗传算法优化小波神经网络的初始权值及小波参数,对砂、礁石、泥3种底质类型分别进行训练,并得到3种底质的测试精度都在90%以上,优于单独利用小波神经网络进行训练时的测试精度,克服了小波神经网络训练时易陷入局部极小的固有缺陷,表明基于遗传算法的小波神经网络可有效用于海底底质声纳图像的识别和分类。     

分段多项式拟合在动三轴试验数据处理中的应用

动三轴采集的试验数据点(剪应变与动剪模量和阻尼比之间)具有离散性和有限性,为方便应用需要对数据点进行拟合,但现有经验公式不一定很好吻合试验数据。为得到不同剪应变与对应的动剪模量和阻尼比之间的关系,本文利用最小二乘原理,对渤海某海洋平台地基土进行动三轴试验获得的动剪模量、阻尼比与剪切应变的数据进行了分段多项式的拟合。数据处理过程是先对剪应变值进行了压缩处理,然后再分段低次多项式拟合,得到多项式拟合参数。通过此项改进解决了正规方程解中的病态问题,且拟合效果良好。     

A Bingham-plastic model for fluid mud transport under waves and currents

Simplified equations of fluid mud motion, which is described as Bingham-Plastic model under waves and currents, are presented by order analysis. The simplified equations are non-linear ordinary differential equations which are solved by hybrid numerical-analytical technique. As the computational cost is very low, the effects of wave current parameters and fluid mud properties on the transportation velocity of the fluid mud are studied systematically. It is found that the fluid mud can move toward one direction even if the shear stress acting on the fluid mud bed is much smaller than the fluid mud yield stress under the condition of wave and current coexistence. Experiments of the fluid mud motion under current with fluctuation water surface are carried out. The fluid mud transportation velocity predicted by the presented mathematical model can roughly match that measured in experiments.     

内核及外围尺度对热带气旋强度影响的数值试验

采用WRF数值模式模拟并对热带气旋尺度与强度关系进行了探讨,且初步诊断分析了内核及外围尺度对热带气旋强度影响的可能机制,结果表明:(1)内核区较大时的缩放引起角速度变化是其影响热带气旋强度的机制之一;(2)内核区较小时的进一步收缩引起的眼区次级环流破坏是其影响热带气旋强度的一种机制;(3)外围尺度变化造成低层上升至高层的水汽总量变化,是其影响热带气旋强度的一种机制;另一方面,外围尺度发生变化使得低层气流向热带气旋内的辐合减少,亦是其影响热带气旋强度的机制之一。     

Seismic fracture evaluation of diaphragm joints in welded beam-to-box column moment connections

Steel box columns are widely used in steel building structures in Taiwan due to their dual strong axes. To transfer the beam-end moment to the column, diaphragm plates of the same thickness and elevations as the beam flanges are usually welded inside the box column. The electro-slag welding (ESW) process is widely used to connect the diaphragms to the column flanges in Taiwan because of its convenience and efficiency. However, ESW may increase the hardness of the welds and heat-affected zones (HAZs), while reducing the Charpy-V notch strength in the HAZ. This situation can cause premature fracture of the diaphragm-to-column flange welds before a large plastic rotation is developed in the beam-to-box column joints. To quantify the critical eccentricity and the effectiveness of fracture prediction, this study uses fracture prediction models and finite element model (FEM) analysis to correlate the test results. In this study, two beam-to-box column connection subassembly tests are conducted with different loading protocols and ESW chamber shapes. To implement a fracture prediction model, the material parameters are established from circumferential notched tensile tests and FEM analysis. Test results indicate that the fracture instances can be predicted on the basis of the cumulative plastic deformation in the HAZs. Analytical results indicate that fracture instances and locations are sensitive to the relative locations of the ESW joints and beam flange. Tests also confirm that the possible fracture of the diaphragm-to-column flange joints can be mitigated by enlarging the chamber of the ESW joint.     

Remote sensing analysis of desert vegetation and its landscape changes: The case in middle reaches of Tarim River Basin,Xinjiang, China

Based on remote sensing information sources including B/W aerial photos of 1983, pseudo-color aerial photos of 1992 and JERS-1/OPS VNIR image of 1996, vegetation types of Yingbazha, in the middle reaches of the Tarim River Basin in Xinjiang, China are mapped using ARC/INFO and related software. The changes in vegetation areas and distribution conditions are analyzed. As a result of natural and human influences, vegetation changes have temporal and spatial characteristics. According to the principles of landscape ecology and geographical information science, the landscape changes are indicated. Moreover, the remote sensing and GIS techniques are integrated to study vegetation and its landscape.     

Numerical simulation of groundwater flowing to horizontal seepage wells under a river

A horizontal seepage well, consisting of an interconnected vertical well, galleries, chambers and small-diameter radiating bores, is used to acquire relatively clean water that has been filtered through natural alluvial deposits in a riverbed. It has wide application, especially in arid and semi-arid areas. The lack of calculation formulae or models for horizontal seepage wells, up until now, has resulted in several false applications. Based on the analysis of groundwater flow characteristics, it has been concluded that several flow regimes coexist and hydraulic head loss exists in the horizontal seepage well. To avoid the difficulty of confirming the flux or head distribution in such a complex system, the model boundary of the whole horizontal seepage well has been moved to that of just the vertical well, and the well-aquifer system was treated as a heterogeneous medium, where the horizontal seepage well itself is a highly permeability medium. A mathematical model has been developed, based on the coupled seepage-pipe flow, by the introduction of equivalent hydraulic conductivity according to different flow regimes. Then a three-dimensional finite difference numerical model, based on the mathematical model, was developed and applied to a horizontal seepage well in China. The numerical model verified the groundwater flow characteristics of the horizontal seepage well. An erratum to this article can be found at