评价生物气生成量、生成期的元素平衡法及其应用

生物气的生成期对其成藏有至关重要的制约作用,但目前国内外尚缺少可信、有效方法来对此进行评价。针对这一难题,考虑到无论生物气的生成机理如何,都是一个有机元素之间的物质平衡过程,文章探索并建立了评价生物气生成量的元素平衡法,并利用松辽盆地大量的实际分析数据,对这一评价方法(模型)进行了标定和应用。结果表明,松辽盆地生物气的生成可能主要发生在800m以浅的埋深条件下;区内源岩生物气的生成量约为285.0×1012m3;生物气的主要生成期在嫩江组沉积末期之前。     

初至层析静校正在复杂山地三维地震勘探中的应用

随着地形高差增大、地貌单元多变、近地表模型复杂,目前被广泛应用的初至折射静校正的精度已无法满足精细勘探的要求。初至层析静校正技术,由给定的初始模型进行正演,用射线追踪方法得到初始模型的初至波,利用该初至波和实际拾取的初至波进行比较,计算地表模型的修正量,反复迭代求得准确的地表模型。山西省国阳新能股份有限公司二矿390水平九采扩区地表标高940～1100m,地貌单元复杂,在对该区资料处理时,利用初至层析折射静校正,经9次迭代计算后,真实地刻划出近地表模型。在二种静校正技术对比中,初至折射静校正不但近地表模型精度低于层析折射静校正,而且其叠加剖面精细程度也远低于层析静校正,如在初至折射静校正叠加剖面同相轴上呈现的凹凸形态,在层析静校正叠加剖面并无显示,且后者剖面的信噪比也比前者明显提高。     

A robust-symmetric mean: A new way of mean calculation for environmental data

Environmental data seldom follow normal distributions, so how to calculate their means is a very important problem. Commonly used methods for mean calculation, such as arithmetic mean, geometric mean, and median, were evaluated. Arithmetic means should only be used when datasets follow normal distributions. Geometric means are suitable for datasets which follow log-normal distributions. Medians are a kind of robust treatment. However, their efficiency is very low. Based on the methods described, two new ideas are developed: robust and symmetric, for calculating means. As far as the symmetric feature is concerned, Box-Cox power transformation is better than logarithmic transformation. Robust statistics and Box-Cox transformation are combined to produce the robust-symmetric mean. As environmental data often follow log-normal or skewed distributions, this method is better than the previous ones and also is appropriate.     

论Eppley PIR精密红外辐射仪的测量精度

本文依据红外辐射表(PIR)的结构、性能和工作原理讨论了测量精度及有关影响因素,比较了粗测和精测两种方法的特点,在此基础上提出了各测量方法的适用范围和精度范围以及提高测量精度的措施,同时也给出了一些特定场合下的测量实例及提高测量精度的具体方法。分析表明:精测方法具有很好的测量精度以及很强的环境适应性。粗测在限定的温度范围内具有测量简单、换算方便、易于实现自动化等优点,精度尚能满足一般要求,但在限定的温度范围以外,测量精度急剧恶化。在影响测量精度的各因素中以温度响应中表体热辐射测量的影响最大,在粗测方法中表内电池的性能与测量精度关系重大。强烈日射对测量精度有一定影响,经订正后可基本消除。     

Increasing critical sensitivity of the Load/Unload Response Ratio before large earthquakes with identified stress accumulation pattern

The Load/Unload Response Ratio (LURR) method is proposed for short-to-intermediate-term earthquake prediction [Yin, X.C., Chen, X.Z., Song, Z.P., Yin, C., 1995. A New Approach to Earthquake Prediction — The Load/Unload Response Ratio (LURR) Theory, Pure Appl. Geophys., 145, 701–715]. This method is based on measuring the ratio between Benioff strains released during the time periods of loading and unloading, corresponding to the Coulomb Failure Stress change induced by Earth tides on optimally oriented faults. According to the method, the LURR time series usually climb to an anomalously high peak prior to occurrence of a large earthquake. Previous studies have indicated that the size of critical seismogenic region selected for LURR measurements has great influence on the evaluation of LURR. In this study, we replace the circular region usually adopted in LURR practice with an area within which the tectonic stress change would mostly affect the Coulomb stress on a potential seismogenic fault of a future event. The Coulomb stress change before a hypothetical earthquake is calculated based on a simple back-slip dislocation model of the event. This new algorithm, by combining the LURR method with our choice of identified area with increased Coulomb stress, is devised to improve the sensitivity of LURR to measure criticality of stress accumulation before a large earthquake. Retrospective tests of this algorithm on four large earthquakes occurred in California over the last two decades show remarkable enhancement of the LURR precursory anomalies. For some strong events of lesser magnitudes occurred in the same neighborhoods and during the same time periods, significant anomalies are found if circular areas are used, and are not found if increased Coulomb stress areas are used for LURR data selection. The unique feature of this algorithm may provide stronger constraints on forecasts of the size and location of future large events.     

库车坳陷侏罗系煤成气动力学模拟研究

应用黄金管—高压釜封闭体系热模拟实验与GC、GC-IRMS分析技术,结合KINETICS专用软件,对库车坳陷侏罗系煤成气进行了动力学模拟研究。库车坳陷侏罗系煤具有高的产气性,在高演化阶段主要产甲烷气;侏罗系煤热解气甲烷碳同位素为-36‰～-25‰,乙烷碳同位素为-28‰～-16‰;甲烷、C2-C5气态烃的生成活化能分别为(47～64k)calm/ol、(55～72k)calm/ol,频率因子各为5.265×1013s-1、5.388×1018s-1。在此基础上,进一步探讨了克拉2气田天然气的成因。研究认为,克拉2气田天然气属阶段捕获的煤成气,主要聚集了5～1Ma时期的天然气,其成熟度Ro分布范围为1.3%～2.5%。     

Fission track evidence for the Mesozoic Cenozoic tectonic uplift of Mt. Bogda, Xinjiang, Northwest China

1 IntroductionThe Mesozoic-Cenozoic tectonic evolution and ki-netics mechanism of the intracontinental orogen are thekey subjects of continental dynamics (Ma Zongjin andGao Xianglin, 2004) and the key to understanding theregional geological tectonics (Qia…     

河南省平顶山盐田盐矿床成矿特征探讨

以现有钻孔及区域资料为基础，对平顶山盐田盐矿床形成的构造条件和盐湖的沉积模式、沉积类型成矿物源进行了分析，为平顶山盐田的进一步勘查和开发提供了宝贵资料。     

Utilization of water resources,ecological balance and land desertification in the Tarim Basin,Xinjiang

Because of the human exploitation and utilization of water resources in the Tarim Basin, the water resources consumption has changed from mainly natural ecosystem to artificial oasis ecosystem, and the environment has changed correspondingly. The basic changes are: desertification and oasis development coexist, both “the human being advance and the desert retreat” and “the desert advance and the human being retreat” coexist, but the latter is dominant. In the upper reaches, water volume drawing to irrigated agricultural areas has increased, artificial oases have been enlarging and moving from the deltas in the lower reaches of many rivers to the piedmont plains. In the middle and lower reaches of the Tarim River, the stream flow has decreased, old oases have declined, natural vegetations have been degenerating, desertification has been enlarging, and the environment has deteriorated. The transition regions, which consist of forestlands, grasslands and waters between the desert and the oases, have been decreasing continuously, their shelter function to the oases has been weakened, and the desert is threatening the oases seriously.     

Natural hydraulic cracking: numerical model and sensitivity study

Natural hydrofracturing caused by overpressure plays an important role in geopressure evolution and hydrocarbon migration in petroliferous basins. Its mechanism is quite well understood in the case of artificial hydraulic fracturing triggered by high-pressure fluid injection in a well. This is not so for natural hydraulic fracturing which is assumed to initiate as micro-cracks with large influence on the permeability of the medium. The mechanism of natural hydraulic cracking, triggered by increasing pore pressure during geological periods, is studied using a fracturing model coupled to the physical processes occurring during basin evolution. In this model, the hydraulic cracking threshold is assumed to lie between the classical failure limit and the beginning of dilatancy. Fluid pressure evolution is calculated iteratively in order to allow dynamic adjustment of permeability so that the fracturing limit is always preserved. The increase of permeability is interpreted on the basis of equivalent fractures. It is found that fracturing is very efficient to keep a stress level at the rock’s hydraulic cracking limit: a fracture permeability one order of magnitude larger than the intrinsic permeability of the rock would be enough. Observations reported from actual basins and model results strongly suggest that natural hydraulic cracking occurs continuously to keep the pressure at the fracturing limit under relaxed stress conditions.