基于nRF9E5的无线网络控制应用设计方案

结合现代餐饮业自动化服务的需求,以无线Soc芯片nRF9E5和点阵型LCD模块ST7920为硬件核心,结合C++Builder软件编程环境,构建了一种基于nRF9E5芯片的无线网络自动化服务管理系统,该系统具有人机界面友好、数据管理软件完善、无线数据传输与控制稳定、高效等特点。可以推广应用到区域水质、土壤等环境的自动监测等领域。     

建国前中国共产党获取群众支持经验浅析

从1921年中国共产党的成立到1949年中华人民共和国成立前,是中国共产党创建与局部执政时期。这时期,中国共产党及其领导下的军队为了获取群众支持,积累了丰富的经验。这些经验可以概括为:关心群众利益,让群众拥护党和政府;实行精兵简政,让群众理解党和政府;严惩贪污腐败,让群众相信党及其领导下的地方政府。     

水样中氮磷营养盐的短期保存技术研究

用8种保存方法对淡水和海水水样中四个氮磷营养盐（NH3-N、NO3—N、NO3-N、PO4—P）参数及总氮的稳定性进行了7d保存效果的比较研究。结果表明,淡水与海水氮磷营养盐的最佳保存方法与效果各不相同,但淡水和海水的总氮值在各种方法保存下均十分恒定。综合考虑有效性及可操作性后提出了5d内的短期保存技术：（1）海水水样用5‰氯仿4℃条件下保存,供NH3-N、NO2—N和N03-N三个营养盐的测定,用5‰甲醛4℃条件下保存供PO4-P测定;（2）淡水用5‰氯仿4℃条件下保存,供NH3-N测定,5‰甲醛4℃条件保存供NO2-N、NO3-N和PO4-P测定。     

东亚夏季风对长江口海域表面水温的影响

根据引水船海洋站 1960 - 2001 年、大戢山海洋站 1978 - 1999 年、吕四海洋站 1960 - 1990 年、滩浒岛海洋站 1984 - 2001 年、嵊山海洋站 1973 - 2001 年夏季 6 - 8 月、秋季 9 - 11 月月平均表面水温资料和美国NCEP / NCAR的北半球月平均 500 hPa 高度场、850 hPa 风场再分析资料,利用合成分析及相关分析方法,分析东亚夏季风对长江口海域 ( 区 ) 表面水温 ( SST ) 的影响.结果表明:长江口区夏季 SST 呈近岸高,外海低的特点.长江口区 SST 冷夏年,东亚夏季风较弱;暖夏年东亚夏季风较强.强夏季风年,长江口区夏季、秋季 SST 偏高;弱夏季风年,长江口区夏季 SST 偏低.     

用于水下运载器的高精度多普勒计程仪开发

文中主要介绍了高精度多普勒计程仪的原理及组成,在863计划的资助下成功开发了该多普勒计程仪的样机,并取得了很好的实验效果,正在走向产业化。     

Genetic diversity analysis with ISSR PCR on green algae Chlorella vulgaris and Chlorella pyrenoidosa

In the present study, genetic polymorphism and diversity in unicellular clones of Chlorella vulgaris Beijerinck and Chlorella pyrenoidosa Chick were studied with Inter Simple Sequence Repeats PCR (ISSR PCR). Samples including four clones of C. vulgaris and three clones of C. pyrenoidosa were purified by single-clone-choice method. For four C. vulgaris unicellular clones, the total number of the bands scored for 18 primers was 298; and the number of the polymorphic bands was 118, of which 39.6% were polymorphic. The size of PCR products ranged from 200 to 2 500 bp. The total number of bands scored for 18 primers, the number of polymorphic bands and the percentage of three C. pyrenoidosa unicellular clones was 194.83 and 30.8%, respectively. POPGENE analysis show that the average Nei genetic diversity (h *) and Shannon index of diversity (I *) in the four C. vulgaris unicellular clones was 0.2181 and 0.3208, respectively, which is slightly higher than those of the three C. pyrenoidosa unicellular clones (0.190 3 and 0.274 8), which agreed with the percentage of polymorphic bands in the mixed samples of the two species. The results suggest that ISSR is a useful method to Chlorella for intra-species genetic analysis.     

几种常见影像融合方法的比较

简述了多源遥感影像融合过程,并利用IKONOS-2的全色影像和多光谱影像,对常用的几种影像融合方法进行了试验与比较,同时对实验结果进行分析和讨论,结果表明小波变换融合算法总体优于其他几种融合方法。     

河流静水滩区潜流带水交换空间分布模式研究（英文）

Hyporheic zone(HZ) influences hydraulic and biogeochemical processes in and alongside streams, therefore, investigating the controlling geographic factors is beneficial for understanding the hydrological processes in HZ. Slack water pool (SWP) is an essential micro-topographic structure that has an impact on surface water and groundwater interactions in the HZ during and after high flows. However, only a few studies investigate HZ surface water and groundwater exchange in the SWP. This study used the thermal method to estimate the HZ water exchange in the SWP in a segment of the Weihe River in China during the winter season. The findings show that on the flow-direction parallel to the stream, river recharge dominates the HZ water exchange, while on the opposing flow-direction bank groundwater discharge dominates the water exchange. The water exchange in the opposing flow-direction bank is about 1.6 times of that in the flow-direction bank. The HZ water exchange is not only controlled by flow velocity but also the location and shape of the SWP. Great water exchange amount corresponds to the shape with more deformation. The maximum water exchange within the SWP is close to the river bank where the edge is relatively high. This study provides some guidelines for water resources management during flooding events.     

Effects of rainfall intensity and topography on rill development and rill characteristics on loessial hillslopes in China

Rill development is a major soil erosion process that causes severe soil degradation.This study examined the effects of representative rainfall intensities(50 and 75 mm h-1),slope gradients(10°and 150),and slope lengths(7.5 and 10.0 m)on rill development and rill characteristics on loessial hillslopes in China.Loessial soil was collected from the cropland of Ansai Town,Yan'an City,Shaanxi Province.The soil with 28.3%sand,58.1%silt,and13.6%clay was packed into a soil pan to conduct rainfall simulations in 2012.The results showed that the time of the knickpoint occurrence(5-16 min),the rill headcut extension(9-33 min),and the mean headward erosion rate(1.7-5.o cm min-1)were better representative indicators for reflecting the changes in the rill development than other indicators used in this study.For a quick evaluation of the rill erosion severity,the rill coverage ratio(1%-12%,generallyincreasing with an increase in the rainfall intensity)was better than the other indicators for treatments with different rainfall intensities,and the rill width-depth ratio(1.56-2.27,generally decreasing with an increase in the slope gradient)was better than the other indicators for treatments with different slope gradients.Furthermore,the rill inclination angle(8.2°-19.1°,significantly increasing with an increase in the slope length)and rill density(0.19-1.34 m·m-2,generally increasing with an increase in the slope length)were more suitable for evaluating the rill erosion severity on hillslopes with different slope lengths.Therefore,the representative indicators could reflect the differences in the rill development and rill characteristics under different rainfall and topographic situations.The study greatly improved the evaluation of rill erosion severity and the prediction of the development of rills for loessial hillslopes.     

铣削斜楔形区域形成及其对流场负压区的影响规律

【目的】研究在内喷淋冷却高速铣孔加工中,铣削斜楔形区域的形成对流场负压区的影响。【方法】对高速湿式铣削加工区域建立三维流场模型,应用计算流体力学软件Fluent,采用非结构化四面体网格单元,利用滑移网格技术对高速铣削过程进行三维瞬态计算。【结果】得到不同刃数、不同转速的立铣刀对同一孔径工件进行切削时流场的压力分布情况。三刃立铣刀斜楔形对流场负压影响最大,当立铣刀刃数增加时,此斜楔形区缩小,负压减小,转速为10 000～20 000 r/min时增长速度逐渐降低,20 000～35 000 r/min时增长速度逐渐增高。【结论】从流场角度分析,流场中最大负压值与转速呈正相关,转速的提高增加了抑制空化的难度;增加铣刀刃数,可减小流场斜楔形区面积,减小空化可能。