Dynamic Performance Investigation of A Spar-Type Floating Wind Turbine Under Different Sea Conditions

Both numerical calculation and model test are important techniques to study and forecast the dynamic responses of the floating offshore wind turbine (FOWT). However, both the methods have their own limitations at present. In this study, the dynamic responses of a 5 MW OC3 spar-type floating wind turbine designed for a water depth of 200 m are numerically investigated and validated by a 1:50 scaled model test. Moreover, the discrepancies between the numerical calculations and model tests are obtained and discussed. According to the discussions, it is found that the surge and pitch are coupled with the mooring tensions, but the heave is independent of them. Surge and pitch are mainly induced by wave under wind wave conditions. Wind and current will induce the low-frequency average responses, while wave will induce the fluctuation ranges of the responses. In addition, wave will induce the wavefrequency responses but wind and current will restrain the ranges of the responses.     

Experimental Study on Sloshing Characteristics in the Elastic Tank Based on Morlet Wavelet Transform

Hydroelastic effect of sloshing is studied through an experimental investigation. Different excitation frequencies are considered with low-fill-depth and large amplitude. Morlet wavelet transform is introduced to analyze the free surface elevations and sloshing pressures. It focuses on variations and distributions of the wavelet energy in elastic tanks. The evolutions of theoretical and experimental wavelet spectra are discussed and the corresponding Fourier spectrums are compared. Afterwards, average values of the wavelet spectra are extracted to do a quantitative study at various points. From the wavelet analysis, sloshing energies are mainly distributed around the external excitation frequency and expanded to high frequencies under violent condition. In resonance, experimental wavelet energy of the elevation in elastic tanks is obviously less than that in the rigid one; for sloshing pressures, the elastic wavelet energy close to the rigid one and conspicuous impulse is observed. It recommends engineers to concern the primary natural frequency and impulsive peak pressures.     

Strength Analysis on Brace Structure for Semi-Submersible in Consideration of Wave Slamming

Slamming on bracings of column stabilized units shall be considered as a possible limiting criterion under transit condition based on the requirements in DNV-OS-C103. However, the wave slamming loads under survival condition were ignored for the strength analysis of the brace structures in many semi-submersible projects. In this paper, a method of strength analysis of brace structure is proposed based on the reconstruction and extrapolation of numerical model. The full-scale mooring system, the wind, wave and current loads can be considered simultaneously. Firstly, the model tests of the semi-submersible platform in wind tunnel and wave tanker have been carried out. Secondly, the numerical models of the platform are reconstructed and extrapolated based on the results of model tests. Then, a nonlinear numerical analysis has been conducted to study the wave slamming load on brace in semi-submersible platform through the reconstructed and extrapolated numerical model. For the randomness of wave load, ten subcases under each condition have been carried out. The value of the 90% Gumble distribution values of the ten subcases are used. Finally, the strength on brace structure has been analyzed considering the wave slamming. The wave slamming loads have been compared between the survival condition and transit condition with the method. The results indicate that wave slamming under survival condition is more critical than that under transit condition. Meanwhile, the wave slamming is significant to the structural strength of the brace. It should be overall considered in the strength analysis of the brace structure.     

Establishment of Numerical Wave Flume Based on the Second-Order Wave-Maker Theory

With growing computational power, the first-order wave-maker theory has become well established and is widely used for numerical wave flumes. However, existing numerical models based on the first-order wave-maker theory lose accuracy as nonlinear effects become prominent. Because spurious harmonic waves and primary waves have different propagation velocities, waves simulated by using the first-order wave-maker theory have an unstable wave profile. In this paper, a numerical wave flume with a piston-type wave-maker based on the second-order wave-maker theory has been established. Dynamic mesh technique was developed. The boundary treatment for irregular wave simulation was specially dealt with. Comparisons of the free-surface elevations using the first-order and second-order wave-maker theory prove that second-order wave-maker theory can generate stable wave profiles in both the spatial and time domains. Harmonic analysis and spectral analysis were used to prove the superiority of the second-order wave-maker theory from other two aspects. To simulate irregular waves, the numerical flume was improved to solve the problem of the water depth variation due to low-frequency motion of the wave board. In summary, the new numerical flume using the second-order wave-maker theory can guarantee the accuracy of waves by adding an extra motion of the wave board. The boundary treatment method can provide a reference for the improvement of nonlinear numerical flume.     

Local Oceanic Vertical Deflection Determination with Gravity Data Along a Profile

Deflections of the vertical (DOVs) over oceans cannot be directly measured, which restricts their applications. A local covariance function of anomalous potential is put forward in this paper in conjunction with the least-squares collocation (LSC) method to compute the oceanic DOVs utilization of oceanic gravity data along a profile. The covariance functions of gravity field quantities have been derived directly as functions of x, y and z without the need to introduce coordinate transformations corresponding to along- or cross-profile components. In the proposed methodology, gravity data along a profile were used to calculate the residual gravity anomaly using the remove-compute-restore technique. The residual gravity anomaly was used to calculate the parameters of the proposed covariance function of the local anomalous gravity field, which was used in the LSC to compute the residual DOVs along the profile. The residual DOVs added model DOVs to recover the DOVs along the profile. The results of a simulation experiment prove that the proposed methodology is feasible and effective.     

无人化时代反水雷装备体系构想

根据我国海洋方向面临的战略安全环境、建设“海上丝绸之路”的要求,我国的反水雷作战范围将延伸到第一岛链以外的海域,反水雷任务除了传统的近岸/ 近海反水雷任务,还增加了海峡反水雷、交通线反水雷以及海外基地反水雷等任务。 为了满足我国反水雷作战需求,结合国际上反水雷技术装备发展方向,用信息化改造、无人化拓展现有反水雷装备,构建无人化时代反水雷装备体系,形成能够在近岸、近海、中远海实施快速、安全、高效的反水雷作战能力。     

对抗航空磁探的磁诱饵模拟指标分析及度量方法

针对航空磁探的威胁,潜艇可通过施放能够模拟其空中磁场特性的装置(磁诱饵)进行对抗,在对磁诱饵进行研究时,需要对其模拟需求进行分析。针对此问题,在对目前常用磁探仪工作原理及优缺点进行分析的基础上建立了基于标量磁探仪的航空磁探潜模型,以所建立的航空磁探潜模型为基础,分析了对抗航空磁探时磁源所需满足的模拟需求,并给出对抗效能评估度量方法及指标:磁场功率比、磁场方向可调性指标及有效面积指标,为潜艇空中磁场模拟方法研究的开展提供了基础。     

土体约束对海底管道整体屈曲的影响机理研究

高温高压下海底管道的整体屈曲稳定性分析是管道设计的重要组成部分,而选取多长的管道进行分析对其整体屈曲稳定性结果影响显著。依据临界管长将管道分为"长管"与"短管",基于动力显式分析方法,揭示了长管与短管在发生整体屈曲过程中,屈曲幅值与波长、管壁轴向压力、轴向应变及轴向位移的变化规律;研究了土体约束力影响管道临界长度的规律性,分析了土体约束力系数对长管与短管整体屈曲变形的影响。研究发现,土体约束力对短管的整体屈曲行为影响显著,短管的整体屈曲幅值随土体约束力系数的增大呈现先增大后减小的趋势。该项研究对区分不同长度管道的整体屈曲类型进而采取有效防控措施具有重要参考价值。     

底栖有孔虫(Florilus decors)壳体微量元素/钙比值的LA-ICP-MS原位微区分析方法及应用——以长江口外海域为例

深海沉积物中有孔虫壳体的微量元素、同位素测试技术已较为成熟,而河口近海沉积物中有孔虫壳体元素微区测试却鲜有报道。本文报道了一种利用激光剥蚀电感耦合等离子体质谱（LA-ICP-MS）分析法测试取自长江口外沉积物中的有孔虫壳体元素/钙比值的技术,研究了氦气载气流量、能量密度、束斑大小、激光剥蚀频率等参数对测试结果的影响,优化了活体有孔虫原位分析方法。应用确定的测试条件对2016年7月取自长江口外的底栖有孔虫优美花朵虫样品（Florilus decors）进行测试,发现Mg、Sr等元素/钙比值在壳体不同位置上无显著差异,而Mn的数据较为离散,可能与有孔虫生长过程中经历的水环境及其变化有关。     

长江口盐度梯度下不同形态碳的分布、来源与混合行为

河口碳的生物地球化学过程是全球碳循环的重要组成。通过测定溶解无机碳（DIC）及其稳定同位素丰度（δ13C_DIC）,溶解有机碳（DOC）,有色溶解有机物（CDOM）,颗粒有机碳（POC）及其稳定同位素丰度（δ13C_POC）与元素比值（N/C）及相关指标,研究了2014年7月长江口盐度梯度下不同形态碳的分布、来源和混合行为。结果表明,DIC浓度、DOC浓度、POC含量分别为1 583.2~1 739.6 μmol/L,128.4~369.4 μmol/L和51.2~530.8 μmol/L,这些不同形态碳及CDOM的荧光组分的分布模式相似,均是从口内到口外,整体呈现先增大后减小的趋势,并与盐度呈现非保守混合行为。添加作用主要发生在在口门处最大浑浊带附近。与含量相反,从口内到口外,δ13C_DIC和δ13C_POC均呈现逐渐减小再增大的趋势,在口门附近达到最低值,分别为-9.7‰和-26.7‰。在口门附近不同形态碳含量上升及δ13C_DIC、δ13C_POC的降低可能主要与沉积物再悬浮及微生物作用有关。基于蒙特卡洛模拟的三端元混合模型的结果显示,河口内外POC来源变化明显,口内POC以陆源有机碳贡献为主,平均为62.3%,口外海源贡献逐渐增加。CDOM相关参数结果表明长江口CDOM主要来自陆源输入,海源及人类活动等也对其产生影响。