湘南地区红黏土动态回弹模量试验与预估模型研究

湘南地区广泛分布红黏土,它具有天然含水率高、孔隙比大及结构性强等特点,可用于特殊路基填料。为获得红黏土的动态回弹性能,利用动三轴试验研究了偏应力、围压应力和体应力对红黏土动态回弹模量的影响。结果表明：动态回弹模量随围压和压实度的提高而增大,随偏应力的增大而减小;动态回弹模量受含水率影响较大,并在最佳含水率附近达到最大值。基于试验揭示的动态回弹模量与应力的相关性,采用3种应力相关的典型动态回弹模量预估模型对试验数据进行回归分析,进而遴选出最佳预估模型。误差分析表明,对于湘南地区红黏土,考虑偏应力和围压应力的回弹模量预估模型具有更高的决定系数,能更好地拟合红黏土的动态回弹模量。动态回弹模量试验结果和遴选的预估模型将为湘南地区红黏土路基设计提供试验和理论依据。     

南海南、北大陆边缘盆地烃源岩热演化差异及成因分析

对横跨南海南、北共轭大陆边缘的两条骨干剖面所经过的沉积盆地烃源岩热演化进行模拟,分析了南、北陆缘盆地烃源岩热演化差异。结果表明,南海南部陆缘盆地生烃门限整体比北部陆缘盆地的生烃门限浅,南部陆缘盆地生烃门限整体在2 200~2 300 m之间,中新统烃源岩基本已进入生烃门限;北部陆缘盆地生烃门限整体位于2 500~2 600 m之间,渐新统及其以下烃源岩进入生烃门限。南海南、北陆缘盆地生烃门限的规律性与南海现今热流分布南高北低、西高东低的整体趋势相对应,高热流有利于烃源岩的成熟与生烃,因此热流值高的区域对应生烃门限较浅。造成南、北陆缘主力烃源岩的热演化程度差异的主要原因可能是由南海扩张及古南海俯冲引起的地温场变化所引起。     

Heavy metals in particulate and colloidal matter from atmospheric deposition of urban Guangzhou,South China

Suspended particulate matter (SPM) and colloidal matter (COM) in annual dry and wet deposition samples in urban Guangzhou were for the first time collected, and their trace metals were investigated by using inductively coupled plasma mass spectrometry (ICP-MS). The deposition flux of SPM and of metal elements varied largely among the investigated seasons, and reached the maximum in spring. The correlation analysis indicated that significant correlations existed among some of the metal elements in the deposition samples. The enrichment factors (EF) of metals in COM in the deposition ranging from 79.66 to 130,000 were much higher than those of SPM ranging from 1.65 to 286.48, indicating the important role of COM. The factor analysis showed that emissions from street dust, non-ferrous metal production, and heavy fuel oil were major sources of the trace metals. Positive matrix factorization (PMF) model was used to quantitatively estimate anthropogenic source.     

Changes of soil surface roughness under water erosion process

The objective of this study was to determine the changing characteristics of soil surface roughness under different rainfall intensities and examine the interaction between soil surface roughness and different water erosion processes. Four artificial management practices (raking cropland, artificial hoeing, artificial digging, and contour tillage) were used according to the local agriculture customs of the Loess Plateau of China to simulate different types of soil surface roughness, using an additional smooth slope for comparison purposes. A total of 20 rainfall simulation experiments were conducted in five 1 m by 2 m boxes under two rainfall intensities (0.68 and 1.50 mm min^?1) on a 15° slope. During splash erosion, soil surface roughness decreased in all treatments except raking cropland and smooth baseline under rainfall intensity of 0.68 mm min^?1, while increasing for all treatments except smooth baseline under rainfall intensity of 1.50 mm min^?1. During sheet erosion, soil surface roughness decreased for all treatments except hoeing cropland under rainfall intensity of 0.68 mm min^?1. However, soil surface roughness increased for the artificial hoeing and raking cropland under rainfall intensity of 1.50 mm min^?1. Soil surface roughness has a control effect on sheet erosion for different treatments under two rainfall intensities. For rill erosion, soil surface roughness increased for raking cropland and artificial hoeing treatments, and soil surface roughness decreased for artificial digging and the contour tillage treatments under two rainfall intensities. Under rainfall intensity of 0.68 mm min^?1, the critical soil surface roughness was 0.706 cm for the resistance control of runoff and sediment yield. Under rainfall intensity of 1.50 mm min^?1, the critical soil surface roughness was 1.633 cm for the resistance control of runoff, while the critical soil surface roughness was 0.706 cm for the resistance control of sediment yield. These findings have important implications for clarifying the erosive nature of soil surface roughness and harnessing sloped farmland. Copyright © 2013 John Wiley & Sons, Ltd.     

瞬态滤波器设计及其在地方地震观测中的应用研究

目前地震数据采集器使用的最后两级数字滤波器相位有最小相位和线性相位两种。相位特性直接影响着记录的地震波形数据质量,最小相位滤波器的相位特性非线性严重,引起波形失真,线性相位滤波器带来“前缀波”。本文介绍了一种专用于地震波形采集的瞬态滤波器的设计及其观测分析研究。该瞬态滤波器既有最小相位特性,又有较好的线性相位特性,具有良好的瞬态响应波形。地方震实测数据表明,使用瞬态滤波器记录的地震波,没有"前缀"波出现,初动半周期也没有被展宽,波形失真最小。因为通带至过渡带转角平缓和过渡带滚降速率低是所有瞬态特性良好的滤波器的共同特征,故使用瞬态滤波必须付出的代价是提高采样率来确保通带上边沿频率保持不变。     

瞬态滤波器设计及其在地方地震观测中的应用研究

目前地震数据采集器使用的最后两级数字滤波器相位有最小相位和线性相位两种。相位特性直接影响着记录的地震波形数据质量,最小相位滤波器的相位特性非线性严重,引起波形失真,线性相位滤波器带来“前缀波”。本文介绍了一种专用于地震波形采集的瞬态滤波器的设计及其观测分析研究。该瞬态滤波器既有最小相位特性,又有较好的线性相位特性,具有良好的瞬态响应波形。地方震实测数据表明,使用瞬态滤波器记录的地震波,没有"前缀"波出现,初动半周期也没有被展宽,波形失真最小。因为通带至过渡带转角平缓和过渡带滚降速率低是所有瞬态特性良好的滤波器的共同特征,故使用瞬态滤波必须付出的代价是提高采样率来确保通带上边沿频率保持不变。     

基于最小二乘的岩石频谱参数反演初始值选取的讨论

频谱激电法作为地球物理勘探的有效手段,在寻找激电异常体以及探寻深部矿产方面有重大贡献,岩石频谱参数的确定是实现该方法的重要步骤。在利用最小二乘法对复电阻率、相位参数进行反演时,各频谱参数初始值选取不同对反演效果影响较大,选取不好甚至会发散。在各频谱参数所属范围内采用随机选取初始值的方法进行反演,对复电阻率幅值曲线以及相位曲线拟合效果较好,不易陷入局部极小值的特点,能克服了较为盲目选取初始值而对结果带来的不良影响。     

吉林通化地震台四分量钻孔应变在日本9.0级地震前后的变化特征

基于通化地震台四分量应变观测,通过K-L最佳直线拟合及傅立叶滑动去年周期对数据进行处理,进一步分析日本9.0级地震前后应变变化特征。结果表明,K-L最佳直线拟合和傅立叶滑动去年周期,可以较好地消除通化台应变观测中的长趋势变化项和年变成分,使应力应变的微动态变化更加显著地表现出来;通化台四分量应变在日本9.0级地震前的压性变化与同一构造带的另外两个台站分量应变观测的大幅压性变化一致;日本9.0级地震使通化台面应变出现持续约8个月左右的扩张变化,变化性质与由GPS计算得到的同震位移结果较为一致。     

2014年新疆于田M_S7.3强震构造背景及其与2008年M_S7.3地震之间的关系讨论

首先介绍了2014年2月12日新疆于田MS7.3地震的区域构造背景与断裂活动情况;然后分析了此次MS7.3地震震中位置以及周边历史地震震源机制特征,认为2014年2月12日于田MS7.3地震发生在阿什库勒断裂东支上,2014年MS7.3地震和2008年MS7.3地震是阿尔金断裂带南端尾部向西南方向延伸,由左旋走滑为主逐渐转变为拉张作用为主的过程中,在阿什库勒断裂带不同位置发生的2次地震,它们存在着相同的力源作用,2008年MS7.3地震对2014年MS7.3地震的发生有促进作用;最后利用分层地壳模型计算了2008年MS7.3地震对2014年MS7.3地震的库仑应力作用,结果同样显示2008年MS7.3地震促进了2014年MS7.3地震的发生。