中国加入WTO对长江三角洲地区产业发展的影响

加入WTO对中国的经济运行环境和区域经济走势将带来深远的影响。长江三角洲地区是我国最有潜力和条件参与较高层次国际竞争的地区之一，但是该地区计划经济体制的影响较深，区域经济发展的问题和制约因素突出。因此，利用新的视角开展中国加入WTO对长江三角洲地区产业发展的影响的综合研究，对我国21世纪地区经济的发展和走向具有重要的指示意义。本文通过对长江三角洲地区产业发展的现状和主要问题作了探讨，并在此基础上，对中国加入WTO对长江三角洲地区产业的冲击力进行了评估和判断。本文认为，为应对中国加入WT0后所带来的冲击，抓住发展机遇，提高区域整体竞争力，长江三角洲地区各城市有必要形成共识，规范和统一地方政府行为，在充分发挥市场机制作用的条件下，对区域产业调控机制和模式作重新构思，以进行区域产业分工体系和区域产业分布格局跨省市、全区域的合作与协同调整。     

气候变化对洮河流域水资源的影响

过去40多年来，洮河流域主要产流区甘南高原的气候和生态环境发生了显著变化，通过对引洮工程的引水区——流域上游40多年的实测水文气象数据的统计分析发现，降水和径流总体下降趋势非常明显，20世纪80年代至90年代降水径流减少更多，达35％；而气温则呈上升趋势，但上升幅度没有降水径流的下降幅度大。由于气候升温变暖、草原载畜过量以及过度砍伐森林，导致气候干旱化、山区水土流失加剧、草原植被退化和沙漠化，这一切都将对未来引洮工程发挥效益产生不利影响。     

金山金矿热液蚀变粘土矿物特征及水-岩反应环境研究

粘土矿物是流体作用过程中水—岩反应的产物，因此其特征反映了流体活动的特征和水-岩反应的环境。金山金矿蚀变粘土矿物主要由伊利石和绿泥石组成，其中，蚀变糜棱岩中的伊利石含量大于绿泥石含量；而蚀变超糜棱岩中的绿泥石含量大于伊利石含量。蚀变糜棱岩中伊利石的多型为2M1，超糜棱岩中为2M1和1M。金山金矿蚀变绿泥石的成份分析结果表明其为富铁绿泥石，由蠕绿泥石、铁镁绿泥石和密绿泥石组成，绿泥石中Fe、Mg质组分不仅来自围岩，而且也有一部分来自流体。利用地质温度计计算绿泥石的形成温度为206-258℃，流体的f(O2)为10^29.56～10^-31.48。本文认为金山金矿热液蚀变为酸性蚀变，其环境为还原环境，流体作用的水／岩比较高；在水—岩反应过程中，流体中的Fe、Mg、Si为带出组分。粘土矿物的形成机制为溶解—迁移—沉淀。     

软土结构性破损的孔径分布试验研究

采用压汞法对天然结构性软土压缩过程孔隙大小分布的演化进行了试验研究，结果表明，当荷载超过结构屈服应力后，尺寸较大的团粒间孔隙首先发生破坏，随着荷载的增大，越来越小的孔隙受到影响，但团粒内孔隙在压缩过程中不发生变化；根据试验结果提出了孔隙结构破损势的概念，并用其表征孔隙分布随荷载变化的规律。     

Late Caledonian Ductile Thrusting Deformation in the Central East Kunlun Belt, Qinghai, China and Its Significance: Evidence from Geochronology

A high-angle ductile thrusting deformation with top-to-the-north movement penetratively developed in the Proterozoic-Early Paleozoic metamorphic rocks along the Central East Kunlun belt. The deformed rocks suffered epidote-amphibolite facies metamorphism. On the basis of our previous study, we present more data in this paper to further support that the ducdle thrust deformation occurred in the later Caledonian and more detailed information about the deformation. A zircon U-Pb concordant age of 446±2.2 Ma of a deformed granodiorite in the ductile thrust zone was obtained and can be interpreted as the lower limit of the deformation. A syntectonically crystallized and also strongly deformed hornblende Ar/ Ar dating gives an Ar/Ar plateau age of 426.5±3.8 Ma, which represents the deformation age. A strongly orientated muscovite gives an Ar/Ar plateau age of 408±1.6Ma, representing the cooling age after the peak temperature, constraining the upper limit of the ductile thrust deformation. This ductile thru     

邛崃4.5级地震与震后趋势判断

邛崃地震发生后，成都市地震局很快做出反应，及时开展了地震考察并做出了正确的震后趋势判断，取得了较好的社会效益。     

数字化气氡观测干扰因素的分析研究

在进行地下流体数字化气氡观测及将观测资料应用于震情分析的过程中 ,发现某些干扰因素对数字化气氡观测和水氡的影响不同。在目前所用观测仪器和方法的条件下 ,气温对气氡值的影响系数为 - 0 4 % /℃ ;气压对气氡测值的影响系数为 0 1% /hPa ;不同类型的气水分离装置对气氡观测的影响很显著 ;同一含水层的井 (泉 )出水量的短期变化可引起观测水井流量的变化 ,但对气氡测值影响不显著 ;气氡测值对逸出气流量的变化反映不明显 ;逸出气含有杂质及气路泄漏等均会引起测值的下降。结合仪器的工作原理 ,对干扰产生的机制以及排除的方法进行了讨论     

Study of crustal structure with S—wave data from Maqen—Jingbian profile

2-D crustal velocity structure and vp/vs are obtained by processing and interpretation of S-wave data from Maqen-Jingbian deep seismic sounding(DSS)profile.The result shows that there exist obvious differences in 2-D S-wave velocity structure and vp/vs ratio structure along the profile.The S-wave velocities are low and vp/vs ration is high for the westem section of the profile and Haiyuan region,while they are normal for the middle and eastern sections.The changes in lithologic characters of two major anomalous zones are discussed according to lateral variation of S-wave velocity structure and vp/vs ratio structure.It is concluded that the development and occurrence of the Haiyuan strong earthquake is not only related to tectonic activities,but also to lithologic characters of the region.     

Exploration and Study on Deep Crust Structural Characteristics in the Jiashi-Artux Seismic Region

The data from two deep seismic sounding profiles was processed and studied comprehensively. The results show that crnst-mantle structures in the investigated region obviously display layered characteristics and velocity structures and tectonic features have larger distinction in different geological structure blocks. The boundary interface C between the upper and lower crust and Moho fluctuate greatly. The shallowest depths of C (30.0km) and Moho (45.5km) under Jiashi deepen sharply from Jiashi to the western Kunlun mountain areas, where the depths of C and Moho are 44.0km and 70.0km, respectively. The higher velocity structures in the Tarim massif determine its relatively “stable“ characteristics in crust tectonics. The phenomenon in the Jiashi region, where the distribution of earthquake foci mostly range from 20kin to 40kin in depth, may infer that the local uplift of C and Moho interface, anomalonsly lower velocity bodies and deep large faults control earthquake occurrence and seismogenic processes in the Jiashi strong earthquake swarm.     

Contemporary crustal deformation of the Chinese continent and tectonic block model

We obtain the preliminary result of crustal deformation velocity field for the Chinese continent by analyzing GPS data from the Crustal Motion Observation Network of China (CMONOC), particularly the data from the regional networks of CMONOC observed in 1999 and 2001. We delineate 9 technically active blocks and 2 broadly distributed deformation zones out of a dense GPS velocity field, and derive block motion Euler poles for the blocks and their relative motion rates. Our result reveals that there are 3 categories of deformation patterns in the Chinese continent. The first category, associated with the interior of the Tibetan Plateau and the Tianshan orogenic belt, shows broadly distributed deformation within the regions. The third category, associated with the Tarim Basin and the region east of the north-south seismic belt of China, shows block-like motion, with deformation accommodated along the block boundaries only. The second category, mainly associated with the borderland of the Tibetan Plateau, such as the Qaidam, Qilian, Xining (in eastern Qinghai), and the Diamond-shaped (in western Sichuan and Yunnan) blocks, has the deformation pattern between the first and the third, i.e. these regions appear to deform block-like, but with smaller sizes and less strength for the blocks. Based on the analysis of the lithospheric structures and the deformation patterns of the regions above, we come to the inference that the deformation modes of the Chinese continental crust are mainly controlled by the crustal structure. The crust of the eastern China and the Tarim Basin is mechanically strong, and its deformation takes the form of relative motion between rigid blocks. On the other hand, the northward indentation of the Indian plate into the Asia continent has created the uplift of the Tibetan Plateau and the Tianshan Mountains, thickened their crust, and raised the temperature in the crust. The lower crust thus has become ductile, evidenced in low seismic velocity and high electric conductivity observed. The brittle part of the crust, driven by the visco-plastic flow of the lower crust, deforms extensively at all scales. The regions of the second category located at the borderland of the Tibetan Plateau are at the transition zone between the regions of the first and the third categories in terms of the crustal structure. Driven by the lateral boundary forces, their deformation style is also between the two, in the form of block motion and deformation with smaller blocks and less internal strength.