P波斜入射角对沉管隧道地震响应的影响

为了研究P波斜入射对沉管隧道地震响应的影响,以港珠澳大桥沉管隧道为工程背景,考虑上覆海水与海床、沉管隧道之间耦合作用,采用粘弹性边界和等效力的地震荷载输入方式,利用ADINA软件建立三维有限元模型进行地震响应分析。分析入射角为0°、20°、40°、50°、60°时P波对沉管隧道环向应力峰值（正应力峰值、剪应力峰值）和位移峰值的影响,结果表明:入射角为40°时,沉管隧道应力峰值最大;入射角为0°—40°时,隧道的应力峰值逐渐增大,入射角为40°—60°时,隧道的应力峰值逐渐减小;隧道截面4个转角处及隔墙与顶板、底板的连接处为隧道剪应力峰值最大处;隧道截面左侧剪应力峰值远大于右侧;隧道顶板正应力峰值最大,顶板的正应力峰值大约为底板的2倍;隧道截面左侧位移峰值远大于隧道截面右侧。     

Differential physiological responses of the coastal cyanobacterium <Emphasis Type="Italic">Synechococcus</Emphasis> sp. PCC7002 to elevated <Emphasis Type="Italic">p</Emphasis>CO<Subscript>2</Subscript> at lag,exponential, and stationary growth phases

We studied the effects of expected end-of-the-century pCO₂ (1000 ppm) on the photosynthetic performance of a coastal marine cyanobacterium Synechococcus sp. PCC7002 during the lag, exponential, and stationary growth phases. Elevated pCO₂ significantly stimulated growth, and enhanced the maximum cell density during the stationary phase. Under ambient pCO₂ conditions, the lag phase lasted for 6 days, while elevated pCO₂ shortened the lag phase to two days and extended the exponential phase by four days. The elevated pCO₂ increased photosynthesis levels during the lag and exponential phases, but reduced them during the stationary phase. Moreover, the elevated pCO₂ reduced the saturated growth light (Ik) and increased the light utilization efficiency (α) during the exponential and stationary phases, and elevated the phycobilisome:chlorophyll a (Chl a) ratio. Furthermore, the elevated pCO₂ reduced the particulate organic carbon (POC):Chl a and particulate organic nitrogen (PON):Chl a ratios during the lag and stationary phases, but enhanced them during the exponential phase. Overall, Synechococcus showed differential physiological responses to elevated pCO₂ during different growth phases, thus providing insight into previous studies that focused on only the exponential phase, which may have biased the results relative to the effects of elevated pCO₂ in ecology or aquaculture.     

Assessment of calanchi and rill–interrill erosion susceptibilities using terrain analysis and geostochastics: A case study in the Oltrepo Pavese,Northern Apennines,Italy

Soil erosion is one of the most important environmental problems distributed worldwide. In the last decades, numerous studies have been published on the assessment of soil erosion and the related processes and forms using empirical, conceptual and physically based models. For the prediction of the spatial distribution, more and more sophisticated stochastic modelling approaches have been proposed – especially on smaller spatial scales such as river basins. In this work, we apply a maximum entropy model (MaxEnt) to evaluate badlands (calanchi) and rill–interrill (sheet erosion) areas in the Oltrepo Pavese (Northern Apennines, Italy). The aim of the work is to assess the important environmental predictors that influence calanchi and rill–interrill erosion at the regional scale. We used 13 topographic parameters derived from a 12 m digital elevation model (TanDEM-X) and data on the lithology and land use. Additional information about the vegetation is introduced through the normalized difference vegetation index based on remotely sensed data (ASTER images). The results are presented in the form of susceptibility maps showing the spatial distribution of the occurrence probability for calanchi and rill–interrill erosion. For the validation of the MaxEnt model results, a support vector machine approach was applied. The models show reliable results and highlight several locations of the study area that are potentially prone to future soil erosion. Thus, coping and mitigation strategies may be developed to prevent or fight the soil erosion phenomenon under consideration. © 2020 John Wiley & Sons, Ltd.     

Seismic responses of postyield hardening single–degree-of-freedom systems incorporating high-strength elastic material

It is widely accepted that ductility design improves the seismic capacity of structures worldwide. Nevertheless, inelastic deformation allows serious damage to occur in structures. Previous studies have shown that a certain level of postyield stiffness may reduce both the peak displacement and residual deformation of a structure. In recent years, several high-strength elastic materials, such as fiber-reinforced polymer (FRP) and high-strength steel bars, have been developed. Application of these materials can easily provide a structure with a much higher and more stable postyield stiffness. Many materials, members, and structures that incorporate both high-strength elastic materials and conventional materials show significant postyield hardening (PYH) behaviors. The significant postyield stiffness of PYH structures can help effectively reduce both peak and residual deformations, providing a choice when designing resilient structures. However, the findings of previous studies of structures with elastic-perfectly plastic (EPP) behavior or small postyield stiffness may not be accurate for PYH structures. The postyield stiffness of a structure must be considered an important primary structural parameter, in addition to initial stiffness, yielding strength, and ductility. In this paper, extensive time history and statistical analyses are carried out for PYH single–degree-of-freedom (SDOF) systems. The mean values and coefficients of variation of the peak displacement and residual deformation are obtained and discussed. A new R-μ_p-T-α relationship and damage index for PYH structures are proposed. A theoretical model for the calculation of residual deformation is also established. These models provide a basis for developing the appropriate seismic design and performance evaluation procedures for PYH structures.     

Spatial distribution and behavior of dissolved selenium speciation in the South China Sea and Malacca Straits during spring inter-monsoon period

Selenium(Se) has been recognized as a key trace element that is associated with growth of primary producers in oceans. During March and May 2018, surface water(67 samples) was collected and measured by HG-ICP-MS to investigate the distribution and behavior of selenite [Se(IV)], selenate [Se(VI)] and dissolved organic selenides(DOSe) concentrations in the Zhujiang River Estuary(ZRE), South China Sea(SCS) and Malacca Straits(MS). It showed that Se(IV)(0.14–3.44 nmol/L) was the dominant chemical species in the ZRE, related to intensive manufacture in the watershed; while the major species shifted to DOSe(0.05–0.79 nmol/L) in the MS, associated with the wide coverage of peatland and intensive agriculture activities in the Malaysian Peninsula. The SCS was identified as the northern and southern sections(NSCS and SSCS) based on the variations of surface circulation.The insignificant variation of Se(IV) in the NSCS and SSCS was obtained in March, potentially resulting from the high chemical activity and related preferential assimilation by phytoplankton communities. Contrastively, the lower DOSe concentrations in the SSCS likely resulted from higher primary production and utilization during March. During May, the concentration of Se(IV) remained low in the NSCS and SSCS, while DOSe concentrations increased notably in the SSCS, likely due to the impact of terrestrial inputs from surface current reversal and subsequent accumulation. On a global scale, DOSe is the dominant Se species in tropical oceans, while Se(IV) and Se(VI) are major fractions in high-latitude oceans, resulting from changes in predominated phytoplankton and related biological assimilation.     

The δ18O of UST Quartz in Two Porphyry Deposits,China

The unidirectional solidification textures (UST) quartz is generally thought to form from fluids exsolved from shallow intrusions and/or magma chambers, but such an idea is still poorly constrained from the evidence of stable isotopes. In this study, we report for the first time the δ¹⁸O of quartz that shows UST from the Qulong Cu–Mo and the Yechangping Mo porphyry deposits in China. The analysis results show that the UST quartz samples from the Qulong deposit have δ¹⁸O values ranging from +6.2 ‰ to +7.6 ‰, which are similar to that of quartz phenocrysts (+6.7 ‰ to +7.8 ‰). In contrast, the UST quartz samples from the Yechangping porphyry Mo deposit yield a high δ¹⁸O value (+10.0 ‰). The δ¹⁸O_water value of Yechangping UST quartz (+8.5 ‰) is also higher than that of Qulong (+4.6 ‰ to +5.8 ‰). Hydrothermal biotite from potassic alteration and sericite from early phyllic alteration at Qulong have similar δ¹⁸O values to UST quartz, suggesting the involvement of magmatic fluids during this stage of deposit evolution.     

基于磁偶极子的频率域电磁系统几何误差分析

基于磁偶极子模型的频率域电磁法仪器在进行大地探测的过程中,由于收发线圈的安装误差、晃动以及材料的几何形变等因素影响,收发线圈的位置及姿态角发生变化,从而产生几何误差,而几何误差的定量分析对频率域电磁法仪器在制作、野外实验操作以及校正方面均具有很强的指导意义。本文根据误差来源的不同,将几何误差分为一次场误差和二次场误差两类;通过引入一次场张量矩阵和二次场张量矩阵,基于均匀大地模型正演得到9种线圈架构接收线圈接收到的一次场及二次场,并以微分的方式定量地分析了9种线圈架构收发线圈位置及姿态角变化引起几何误差的变化特征。对9种线圈架构的几何误差分析可知:在几何形变引入的一次场误差中,仅有PERyz、PERzy线圈架构不包含位置变化的一次项误差,仅有VCA、VCP及HCP线圈架构不包含姿态角变化的一次项误差;在几何形变引入的二次场误差中,PERzx、PERxz线圈架构最大,而VCA、VCP及HCP线圈架构受高度及收发距变化的影响很大,需要实时测量并进行校正,VCP线圈架构受收发距变化以及姿态角变化的影响最小。     

山东及附近海域构造环境剪应力场分析

利用山东数字地震台网的地震波形记录,选取2007年以来台网记录清晰的ML≥2．0数字地震波形资料,计算每次地震的环境剪应力值τ0和矩震级MW,并分析其相关关系;结合山东地区地质构造和地震活动性特点,对胶东半岛及北部海域、南黄海北部地区、沂沭带地区、冀鲁豫交界地区应力场分布和时空变化进行细致分析,并探讨其区域特征及与地震活动性的关系。     

青藏高原风沙堆积对多年冻土影响研究进展

受全球气候变化和人类活动影响,青藏高原上的土地沙漠化正呈现加速发展态势。沙漠化产生的风沙堆积势必改变地表辐射和能量平衡状况,对较为敏感和脆弱的多年冻土环境造成影响,并可能影响青藏铁路路基的稳定性。因此,研究积沙对多年冻土的影响对于高原沙害防治、多年冻土保护和道路工程建设都具有重要的理论及现实意义。目前,前人已在青藏高原地表能量平衡研究方面取得了一些成果,并开始关注积沙对冻土温度影响问题。然而,由于已有观测资料的连续性、同步性和可比性等局限,对积沙地表辐射和能量平衡方面的研究还比较薄弱,积沙对冻土温度过程影响的研究结果尚不一致,而积沙对路基影响的问题也亟待开展研究。为此,本文提出了加强定位观测、开展室内低温实验以及数值模拟等建议,以期对今后的深入研究起到抛砖引玉作用。