长白山自然保护区旅游灾害及其防治对策

旅游灾害越来越受到人们的重视,文章通过对长白山自然保护区常见灾害类型的分析,建立了灾害管理系 统框架模型,为降低和消除旅游灾害,提出了防范对策。     

南极无冰区典型沉积环境石英砂表面结构特征及其在沉积环境识别中的应用

本文利用电镜扫描方法 (SEM)对比分析了南极乔治王岛无冰区海滩沉积、冰碛物以及阿德雷岛湖泊沉积等典型沉积环境中的石英砂表面结构特征 ,得出了乔治王岛各典型沉积环境中石英砂表面结构特征的颗粒频率曲线。结果表明 :不同沉积环境下的石英砂颗粒表面结构特征具有相似性 ,这主要和南极地区广泛发育的冰川作用有关 ,同时 ,它们也有各自典型的特征组合 ,这些典型特征组合的不同反映了石英砂后期的搬运历史和沉积环境的差异。本文还依据石英砂表面特征的颗粒出现频率 ,利用聚类分析方法对研究区内三级海岸阶地上的沉积物和一个未知成因的样品进行了沉积环境的判别分析 ,结果证明石英砂微形貌特征可以作为南极地区沉积环境识别的有效手段     

层控夕卡岩型矿床成矿系统的元素活动性及质量迁移--以铜陵冬瓜山铜矿床为例

应用改善了的质量平衡方程研究冬瓜山层控夕卡岩型铜矿床成矿系统的元素活动性及质量迁移，结果表明：系统中Zr,Hf,Y和Nb为不活动元素，其余均为活动元素。主量元素中仅CaO为迁出组分，其质量迁移量为84％，其余均为带入组分，带入量最大的SiO2的质量迁移量高达2384％；稀土元素均为带入组分，其中，中稀土较轻稀土和重稀土的活动性更强；其它微量元素中，带入序列由强到弱为：Cr→Ta→Sn→Th，迁出序列由强至弱依次为：U→Sb→Ni—Sr→Ba→Bb→Co→W；成矿元素Cu和Ag为带入组分，其中Cu的带入量最大，质量迁移量高达1200％。本文还得出两点具普适性认识：①稀土元素较其它微量元素对体系条件的变化更为敏感，且往往表现出明显的规律性变化，能更好地示踪地质地球化学过程。②不同元素在不同体系中的行为特征差异极大，仅凭经验判定某一元素为不活动元素往往不可靠。因此，在开展质量平衡研究时，首先采用适当方法确认体系的不活动元素是一项不可或缺的前提工作。     

遥感技术在高寒山区1:25万区域地质调查中的应用研究

针对高寒山区1：25万区调野外工作条件差、时间短，植被覆盖度低、遥感影像质量好的特点，提出了遥感影像解释、遥感标志剖面解译新概念，以及不同工作区用不同大法的新思路。研究、实践认为，利用遥感技术开展高寒山区区域地质调查能减少野外工作量，缩短周期，节约经费，提高调查质量和精度。     

Weibull分布的信息熵在地震预报中的应用研究

根据统计分布与信息熵理论，定义了震级信息熵Hm和地震间隔时间信息熵Ht，并推导了它们的计算公式。通过时空扫描和计算，发现强震前1～3年Hm和Ht出现低值异常，与地震有较好的对应关系，可以作为一组中期或中短期预测指标。     

加卸载响应比(LURR)理论的实验研究

利用大尺度岩石试件破坏声发射实验，对加卸载响应比(Load/Unload Response Ratio)理论进行了实验研究。实验采用的加载条件力求能够模拟地下岩石的复杂受力过程。在加载过程中，岩石试件内部出现的损伤用声发射技术进行了记录。实验数据经过分析之后所得的结论与加卸载响应比理论预测的结果相符合。把加卸载响应比值Y的变化情况与声发射事件定位的过程相对比，也可以进一步看出岩石材料内部的损伤发展过程与加卸载响应比Y值的变化具有一致性。而高Y值的异常情况出现，又是在材料发生最终破坏之前，所以，可以用加卸载响应比理论定量地分析岩石试件损伤演化情况，从而对岩石材料的破坏及地震做出预测。实验结果再一次验证了加卸载响应比理论。     

Principle and mathematical method for inverting stress State of a medium from the remote sensing data

It has been proved through experiments that the electromagnetic radiation energy of a substance will vary when stress acts on the substance. This moment, the electromagnetic radiation energy (observation value) received by the remote sensor is triggered not only by the substance temperature and also by the stress. Separating quantitatively these two kinds of electromagnetic radiation energy and then inversing the actual temperature state and stress state of a medium is a matter with practical significance in earthquake prediction and stability monitoring for the large-scale geotechnical engineering. In this paper the principle and the mathematical method for inversing stress by using multiband remote sensing data are discussed in detail. A calculation example is listed.     

Contemporary crustal deformation of the Chinese continent and tectonic block model

We obtain the preliminary result of crustal deformation velocity field for the Chinese continent by analyzing GPS data from the Crustal Motion Observation Network of China (CMONOC), particularly the data from the regional networks of CMONOC observed in 1999 and 2001. We delineate 9 technically active blocks and 2 broadly distributed deformation zones out of a dense GPS velocity field, and derive block motion Euler poles for the blocks and their relative motion rates. Our result reveals that there are 3 categories of deformation patterns in the Chinese continent. The first category, associated with the interior of the Tibetan Plateau and the Tianshan orogenic belt, shows broadly distributed deformation within the regions. The third category, associated with the Tarim Basin and the region east of the north-south seismic belt of China, shows block-like motion, with deformation accommodated along the block boundaries only. The second category, mainly associated with the borderland of the Tibetan Plateau, such as the Qaidam, Qilian, Xining (in eastern Qinghai), and the Diamond-shaped (in western Sichuan and Yunnan) blocks, has the deformation pattern between the first and the third, i.e. these regions appear to deform block-like, but with smaller sizes and less strength for the blocks. Based on the analysis of the lithospheric structures and the deformation patterns of the regions above, we come to the inference that the deformation modes of the Chinese continental crust are mainly controlled by the crustal structure. The crust of the eastern China and the Tarim Basin is mechanically strong, and its deformation takes the form of relative motion between rigid blocks. On the other hand, the northward indentation of the Indian plate into the Asia continent has created the uplift of the Tibetan Plateau and the Tianshan Mountains, thickened their crust, and raised the temperature in the crust. The lower crust thus has become ductile, evidenced in low seismic velocity and high electric conductivity observed. The brittle part of the crust, driven by the visco-plastic flow of the lower crust, deforms extensively at all scales. The regions of the second category located at the borderland of the Tibetan Plateau are at the transition zone between the regions of the first and the third categories in terms of the crustal structure. Driven by the lateral boundary forces, their deformation style is also between the two, in the form of block motion and deformation with smaller blocks and less internal strength.     

Aseismic negative dislocation model and deformation analysis of crustal horizontal movement during 1999——2001 in the northeast margin of Qinghai-Xizang block

Through numerical simulation for GPS data, aseism/c negative dislocation model for crustal horizontal movement during 1999-2001 in the northeast margin of Qinghai-Xizang block is presented, combined with the spatial distri-bution of apparent strain field in this area, the characteristics of motion and deformation of active blocks and their boundary faults, together with the place and intensity of strain accumulation are analyzed. It is shown that: a) 9 active blocks appeared totally clockwise motion from eastward by north to eastward by south. Obvious sinistral strike-slip and NE-NEE relative compressive motion between the blocks separated by Qilianshan-Haiyuan fault zone was discovered; b) 20 fault segments (most of them showed compression) locked the relative motion between blocks to varying degrees, among the total, the mid-east segment of Qilianshan fault (containing the place where it meets Riyueshan-Lajishan fault) and the place where it meets Haiyuan fault and Zhuanglanghe fault, more favored accumulation of strain. Moreover, the region where Riyueshan-Lajishan fault meets north boundary of Qaidam block may have strain accumulation to some degree, c) Obtained magnitude of block velocities and locking of their boundaries were less than relevant results for observation in the period of 1993-1999.