Large wood clogging during floods in a gravel‐bed river: the Długopole bridge in the Czarny Dunajec River,Poland

During floods, large quantities of wood can be mobilized and transported downstream. At critical sections, such as bridges, the transported wood might be entrapped and a quick succession of backwater effects can occur as a result of the reduction of the cross‐sectional area. The aim of this work is to explore large wood‐related hazards during floods in the gravel‐bed river Czarny Dunajec (Polish Carpathians), where the river flows through the village of D?ugopole. This work is based on the numerical modelling of large wood transport together with flow dynamics in which inlet and boundary conditions were designed based on field observations. The exploratory approach developed in this study uses multiple scenarios (193) to analyse the factors controlling bridge clogging: wood size, wood supply, flow conditions, morphology and obstacles in the riverbed. Results highlighted the strong control of log length (stronger than that of log diameter) on potential blockage probability; however, according to our results the main factor controlling bridge clogging was the flood discharge. River morphology and wood supply play an important role as well. The river morphology may reduce bridge blockage, as it influences flow velocity and depth, and creates natural retention zones for wood. In addition, the impacts of bridge blockage were analysed in terms of afflux depth and length, and flooded area. Results showed that bridge blockage may result in a significant increase in water depth (up to 0.7 m) and flooded area (up to 33% more), therefore increasing flood risk in the village. Copyright © 2016 John Wiley & Sons, Ltd.     

High-resolution computed microtomography for the characterization of a diffusion tensor imaging phantom

This paper addresses the issue of the quantitative characterization of the structure of the calibration model (phantom) for b-matrix spatial distribution diffusion tensor imaging (BSD-DTI) scanners. The aim of this study was to verify manufacturing assumptions of the structure of materials, since phantoms are used for BSD-DTI calibration directly after manufacturing. Visualization of the phantoms’ structure was achieved through optical microscopy and high-resolution computed microtomography (µCT). Using µCT images, a numerical model of the materials structure was developed for further quantitative analysis. 3D image characterization was performed to determine crucial structural parameters of the phantom: porosity, uniformity and distribution of equivalent diameter of capillary bundles. Additionally calculations of hypothetical flow streamlines were also performed based on the numerical model that was developed. The results obtained in this study can be used in the calibration of DTI-BST measurements. However, it was found that the structure of the phantom exhibits flaws and discrepancies from the assumed geometry which might affect BSD-DTI calibration.     

Application of the Unified Stream Assessment Method to Determine the Direction of Revitalization of Heavily Transformed Urban Rivers

Water Resources - The issues related to the assessment of the hydro morphological status of urban rivers in order to identify the revitalisation actions possible to be carried out, has been...     

Identifying and Removing the Silences of Roma Culture in Polish School Texts

The Roma are the largest and, some scholars would argue, the most marginalized group in Europe, an observation evident in an examination of school texts for Polish children. Using the concept of the “geographies of silence,” we discuss the nature of text and graphical silences and the reasons behind the paucity of text, photo, and map coverage. We conclude by presenting photos that could be used in future texts to better inform Polish youth about a much-neglected part of their culture.     

Combining IR and X‐ray microtomography data sets: Application to Itokawa particles and to Paris meteorite

In the near future, a new generation of sample return missions (Hayabusa2, OSIRIS‐REx, MMX, etc.) will collect samples from small solar system bodies. To maximize the scientific outcome of laboratory studies and minimize the loss of precious extraterrestrial samples, an analytical sequence from less destructive to more destructive techniques needs to be established. In this work, we present a combined X‐ray and IR microtomography applied to five Itokawa particles and one fragment of the primitive carbonaceous chondrite Paris. We show that this analytical approach is able to provide a 3‐D physical and chemical characterization of individual extraterrestrial particles, using the measurement of their 3‐D structure and porosity, and the detection of mineral and organic phases, and their spatial co‐localization in 3‐D. We propose these techniques as an efficient first step in a multitechnique analytical sequence on microscopic samples collected by space missions.     

Dynamics of particle export on the Northwest Atlantic margin

The Northwest Atlantic margin is characterized by high biological productivity in shelf and slope surface waters. In addition to carbon supply to underlying sediments, the persistent, intermediate depth nepheloid layers emanating from the continental shelves, and bottom nepheloid layers maintained by strong bottom currents associated with the southward flowing Deep Western Boundary Current (DWBC), provide conduits for export of organic carbon over the margin and/or to the interior ocean. As a part of a project to understand dynamics of particulate organic carbon (POC) cycling in this region, we examined the bulk and molecular properties of time-series sediment trap samples obtained at 968 m, 1976 m, and 2938 m depths from a bottom-tethered mooring on the New England slope (water depth, 2988 m). Frequent occurrences of higher fluxes in deep relative to shallower sediment traps and low Δ¹⁴C values of sinking POC together provide strong evidence for significant lateral transport of aged organic matter over the margin. Comparison of biogeochemical properties such as aluminum concentration and flux, and iron concentration between samples intercepted at different depths shows that particles collected by the deepest trap had more complex sources than the shallower ones. These data also suggest that at least two modes of lateral transport exist over the New England margin. Based on radiocarbon mass balance, about 30% (±10%) of sinking POC in all sediment traps is estimated to be derived from lateral transport of resuspended sediment. A strong correlation between Δ¹⁴C values and aluminum concentrations suggests that the aged organic matter is associated with lithogenic particles. Our results suggest that lateral transport of organic matter, particularly that resulting from sediment resuspension, should be considered in addition to vertical supply of organic matter derived from primary production, in order to understand carbon cycling and export over continental margins.     

Interdecadal variability of anchoveta abundance and overcapacity of the fishery in Peru

Paleontological and historical stock abundance estimates indicate that pelagic fish populations inhabiting upwelling ecosystems undergo large interdecadal variations in abundance with amplitudes equal to, if not larger than, the interannual variability. The interdecadal variability is characterized by periods of high and low abundance, termed “pseudo-cycles”, because of their irregular periodicity. Fisheries targeting small pelagic fish suffer from overall overcapitalization, like many other fisheries, but also from an additional overcapitalization problem: a phase displacement between rapid fish population decreases and a slower disinvestment which follows. This lag produces economic hardship.Here we document the fish:fishery relationship for the Peruvian anchoveta. Anchoveta pseudo-cycles of 20 to >100 years are observed, with the present stock abundance most likely located near upper part of the cycle. Fleet overcapacity expressed as the proportion of unused present capacity is estimated at 72% and processing overcapacity at 89%. A simple bio-economic model demonstrates the risks associated with the pseudo-periodicity in fish stock abundance in conjunction with fishery investment, open access, and overcapacity: a timing bomb for the fishing sector. The lag between disinvestment and decrease in fish abundance is quantified. A reduction of the fishing and processing capacity and measures to decrease the investment lag are recommended to limit the social, economical and political tensions that will result from the expected decrease in stock abundance. Finally, some management options to reduce these risks are discussed.     

Comparison between Eulerian diagnostics and finite-size Lyapunov exponents computed from altimetry in the Algerian basin

Transport and mixing properties of surface currents can be detected from altimetric data by both Eulerian and Lagrangian diagnostics. In contrast with Eulerian diagnostics, Lagrangian tools like the local Lyapunov exponents have the advantage of exploiting both spatial and temporal variability of the velocity field and are in principle able to unveil subgrid filaments generated by chaotic stirring. However, one may wonder whether this theoretical advantage is of practical interest in real-data, mesoscale and sub-mesoscale analysis, because of the uncertainties and resolution of altimetric products, and the non-passive nature of biogeochemical tracers. Here we compare the ability of standard Eulerian diagnostics and the finite-size Lyapunov exponent in detecting instantaneous and climatological transport and mixing properties in the south-western Mediterranean. By comparing with sea-surface temperature patterns, we find that the two approaches provide similar results for slowly evolving eddies like the first Alboran gyre. However, the Lyapunov exponent is also able to predict the (sub-)mesoscale filamentary processes occurring along the Algerian current and above the Balearic Abyssal Plain. Such filaments are also observed, with some mismatch, in sea-surface temperature patterns. Climatologies of Lyapunov exponents do not show any compact relation with other Eulerian diagnostics, unveiling a different structure even at the basin scale. We conclude that filamentation dynamics can be detected by reprocessing available altimetric data with Lagrangian tools, giving insight into (sub-)mesoscale stirring processes relevant to tracer observations and complementing traditional Eulerian diagnostics.     

Abundance and size distribution of transparent exopolymer particles (TEP) in a coccolithophorid bloom in the northern Bay of Biscay

The distribution of transparent exopolymer particles (TEP) was investigated during a coccolithophorid bloom in the northern Bay of Biscay (North Atlantic Ocean) in early June 2006. MODIS chlorophyll-a (Chl-a) and reflectance images before and during the cruise were used to localize areas of important biological activity and high reflectance (HR). TEP profiles along the continental margin, determined using microscopic (TEP_micro) and colorimetric (TEP_color) methods, showed abundant (6.1×10⁶–4.4×10⁷ L^?1) and relatively small (0.5–20 μm) particles, leading to a low total volume fraction (0.05–2.2 ppm) of TEP_micro and similar vertical profiles of TEP_color. Estimates of carbon content in TEP (TEP-C) derived from the microscopic approach yielded surface concentration of 1.50 μmol C L^?1. The contribution of TEP-C to particulate organic carbon (POC) was estimated to be 12% (molar C ratio) during this survey. Our results suggest that TEP formation is a probable first step to rapid and efficient export of C during declining coccolithophorid blooms.