河南省济源盆地下侏罗统鞍腰组重力流沉积特征及其构造意义*

在详细野外剖面工作的基础上,通过岩性特征、沉积构造及沉积序列等的系统观察研究,发现济源盆地下侏罗统鞍腰组重力流沉积由滑塌沉积、砂质碎屑流沉积和浊流沉积构成。滑塌沉积以砂岩和泥岩的混杂、岩层的滑动变形以及泥岩呈碎块被卷入砂岩层中为特征;砂质碎屑流沉积常呈厚层块状,颗粒分选和磨圆较差,杂基较多,可见漂浮于层内的石灰岩砾石;常见的浊流沉积分为2种类型: 具有明显正粒序结构的浊流沉积和砂泥岩薄互层的浊流沉积,可用鲍马序列来描述。鞍腰组重力流沉积可划分为3个沉积序列: 序列A记录了滑塌沉积→砂质碎屑流沉积→浊流沉积→深湖沉积的转换过程;序列B表现为砂质碎屑流与浊流沉积的叠覆;序列C由浊流及湖泊沉积构成,并经历了由序列A→序列B→序列C的沉积演化过程。重力流的形成受秦岭造山带于早侏罗世沿三门峡—鲁山—舞阳断裂发生逆冲推覆作用的控制,其沉积演化指示了秦岭造山带造山作用由强到弱的过程。     

Geochronological data of igneous and metamorphic rocks from the Xing’an-Mongolia Orogenic Belt of the eastern Central Asian Orogenic Belt: implications for the final closure of the Paleo-Asian Ocean

International Journal of Earth Sciences - In order to better constrain the evolution of the Xing’an-Mongolia Orogenic Belt and the resulting closure of the Paleo-Asian Ocean, we conducted an...     

河南省三门峡尖草地铝土矿地质特征及成矿演化模式

以三门峡尖草地铝土矿床为对象,在研究矿床地质特征的基础上,分析了成矿物质来源、控矿因素,并刻画了成矿演化模式.三门峡尖草地铝土矿床赋矿层位为本溪组,是在沉积间断面、沉积古地理、古构造等多个条件的耦合作用下形成的.该地层后期抬升遭受剥蚀,再沉积形成局部堆积型的铝土矿床.其成矿演化模式在豫西地区具有典型找矿意义.     

A comparative study of landslide susceptibility mapping using weight of evidence,logistic regression and support vector machine and evaluated by SBAS-InSAR monitoring: Zhouqu to Wudu segment in Bailong River Basin,China

The determining of landslide-prone areas in mountainous terrain is essential for land planning and hazard mitigation. In this paper, a comparative study using three statistical models including weight of evidence model (WoE), logistic regression model (LR) and support vector machine method (SVM) was undertaken in the Zhouqu to Wudu segment in the Bailong River Basin, Southern Gansu, China. Six conditionally independent environmental factors, elevation, slope, aspect, distance from fault, lithology and settlement density, were selected as the explanatory variables that may contribute to landslide occurrence based on principal component analysis (PCA) and Chi-square test. The relation between landslide distributions and these variables was analyzed using the three models and the results then used to calculate the landslide susceptibility (LS). The performance of the models was then evaluated using both the highly accurate deformation signals produced by using the Small Baseline Subset Interferometric Synthetic Aperture Radar technique and Receiver Operating Characteristic (ROC) curve. Results show more deformation points in areas with high and very high LS levels, and also more stable points in areas with low and very low LS levels for the SVM model. In addition, the SVM has larger area under the ROC curve. It indicates that the SVM has better prediction accuracy and classified ability. For the interpretability, the WoE derives the class of factors that most contributed to landsliding in the study area, and the LR reveals that factors including elevation, settlement density and distance from fault played major roles in landslide occurrence and distribution, whereas the SVM cannot provide relative weights for the variables. The outperformed SVM could be employed to determine potential landslide zones in the study area. Outcome of this research would provide preliminary basis for general land planning such as choosing new urban areas and infrastructure construction in the future, as well as for landslide hazard mitigation in Bailong River Basin.     

Determination of the thicknesses of oil films in micro- and nano-pores in tight oil sands: an example from the southern Songliao Basin,NE China

An experimental method of field-emission environmental scanning electron microscope (ESEM) coupled with the energy dispersive spectrum (EDS) to determine the thickness of oil films in the micro- and nano-pores of tight oil sands was proposed to overcome the limitations of current methods. First, we got the data of the detection range volumes, elemental mass percentages, and elemental atomic percentages using the EDS, and then calculated the volumes of oil films in the detection range according to the elemental mass percentages and the elemental atomic percentages of carbon. After that, we calculated the surface areas of oil films using the pore size data (lengths, widths, and depths) detected by ESEM. The thicknesses of oil films in the pores equaled the volumes divided by the surface areas. An analysis of tight oil samples from the Quan 4 Segment of in the southern Songliao Basin, NE China confirmed that the oil in the micro- and nano-pores had two main forms: oil films and oil droplets. The thicknesses of the oil films ranged from about 400 nm to 2 μm, while the thicknesses of the oil droplets ranged from about 200 to 700 nm.     

Combining AHP and genetic algorithms approaches to modify DRASTIC model to assess groundwater vulnerability: a case study from Jianghan Plain,China

Accurate identification of vulnerability areas is critical for groundwater resources protection and management. The present study employed the modified DRASTIC model to assess the groundwater vulnerability of Jianghan Plain, a major farming area in central China. DRASTICL model was developed by incorporating the land use factor to the original model. The ratings and weightings of the selected parameters were optimized by analytic hierarchy process (AHP) method and genetic algorithms (GAs) method, respectively. A combined AHP–GAs method was proposed to further develop this methodology. The unity-based normalization process was employed to categorize the vulnerability maps into four types, such as very high (>0.75), high (0.5–0.75), low (0.25–0.5), and very low (<0.25). The accuracy of vulnerability mapping was validated by Pearson’s correlation coefficient between vulnerability index and the nitrate concentration in groundwater and analysis of variance F statistic. The results revealed that the modified DRASTIC model had a large improvement over the conventional model. The correlation coefficient increased significantly from 41.07 to 75.31% after modification. Sensitivity analysis indicated that the depth to groundwater with 39.28% of mean effective weight was the most critical factor affecting the groundwater vulnerability. The developed vulnerability model proposed in this study could provide important objective information for groundwater and environmental management at local level and innovation for international researchers.     

The comprehensive evaluation on resource environmental bearing capacity of central cities in the Yellow River Delta-A case study on Dongying City

Dongying City, which is the most important central city in the Yellow River Delta, is located in the estuary of the Yellow River. With a short land formation time, ecological environment is very weak in this area. To realize the sustainable economic development of the Yellow River Delta, resource environment and resource environmental bearing capacity (REBC) must be improved. This study builds assessment system of regional REBC through resource and economic characteristics in Yellow River Delta and uses principal component analysis (PCA) method to evaluate REBC of five counties and districts in Dongying City in 2011-2015 on the dimensions of time and space. Results show that, on the time dimension, Guangrao County is ranked first, Dongying district second for four years and Hekou and Kenli districts with lower ranks in 2012-2015, indicating that more attention needs to be paid to REBC of Hekou and Dongying districts and these two districts should be included into key monitoring areas. From space scale, REBC in five counties and districts has been gradually improving. In order to further develop REBC in Dongying City, measures such as intensifying protection of urban ecological environment and developing circular economy, etc. should be implemented.     

一种水体提取结果的二值化影像求交优化方法

将NDWI、MNDWI、NDVI、WRI、AWEI及非监督分类法分别提取的不同时期水体信息作为粗结果,提出了利用二值化影像求交法对诸粗结果进行优化,得到多期的优化结果,然后利用PCA对各优化结果进行了处理,获得了不同时期水体面积的变化信息。试验表明该方法可以有效抑制噪声,完好地保留水面影像的边缘信息,显著提高了水体信息的提取精度,同时利用优化结果与PCA分别得到的变化量验证了PCA方法的监测精度。     

多测线变偏移距VSP地震各向异性反演

本文从一般弱各向异性介质参数反演中得到了使用两条相互正交的变偏VSP测线计算弱各向异性(WA)参数的反演公式. 如果仅仅使用qP波, 则可以确定9个独立的WA参数, 这9个WA参数可以完全地描述井中接收点在两个剖面内介质的各向异性性质. 通过对走时曲线进行最小二乘条件下的三次样条光滑, 可以获得慢度矢量的垂直分量和水平分量. 如果介质是横向非均匀介质, 则水平分量仅仅被用作反演时的约束条件. 为了获得偏振矢量, 本文引入质心计算方法, 该方法计算简单、 稳定, 而且不存在解的奇异问题. 在寻找与一般各向异性介质最接近的高对称性正交各向异性介质和TTI各向异性介质时, 使用qP波各向异性坐标变换方法和最小二乘求解方法, 得到了与一般各向异性介质最接近的正交各向异性和TTI各向异性参数及其对称轴方向参数的计算公式. 使用这些方法, 对瓜哇海地区布设的两条相互正交的变偏VSP测线数据进行各向异性反演, 获得了井中10个接收点处介质的WA参数. 数值计算和实际资料反演表明, 本文所使用的反演方法能够准确地得到VSP井中接收点处介质的WA参数, 这是地震勘探中研究地壳介质各向异性性质最直接和最可靠的方法.      

基于植被动态的黄土高原生态地理分区

生态地理区划作为自然区划的新分支,近年来受到国内外地理学者的广泛关注,其在认识地理分异规律及区域规划活动中发挥着重要作用。传统生态地理分区多依据自上而下的三级演绎途径,且对于多分区方案的对比与优选缺乏定量化准则。黄土高原作为中国典型的生态脆弱区,植被生长与恢复对缓解当地生态困境十分重要,因此以植被多年动态一致性特征作为分区合理性的评价指标,有助于准确揭示当地生境特点及分异规律。为此,选取热量类、水分类、地形类及地表覆被类共9个指标,采用自组织映射网络（SOFM）与GIS空间分析技术,基于黄土高原近30年来自然本底与覆被状况进行生态地理分区;并依循植被动态一致性准则,依据两步筛选法对多种方案进行优选,最终将黄土高原分为六大生态地理区。研究表明：黄土高原修正6分区方案在12个备选分区方案中效果最好;同时,修正6分区方案多年平均NPP离散系数最低,表明该分区内部离散程度最小。分区方案与既有分区方案相比具有较好的一致性,但由于区划尺度存在一定的差异,整体区域划分更为清晰。对生态地理分区方案优选定量方法的探索,有助于提升自下而上生态地理区划的客观性。