GENESIS OF THE CUMULATE EUCRITES SERRA DE MAGÉ AND MOORE COUNTY: A GEOCHEMICAL STUDY

Major, minor and trace element abundances have been determined by instrumental neutron activation analysis (INAA) in whole rock and plagioclase separates of Serra de Magé (SdM). The whole rock contains 52% normative plagioclase and its chondritic normalized REE abundance pattern shows a large Eu anomaly, dominated by the plagioclase REE distribution, and nearly unfractionated La-Sm and Sm-Lu abundances. The plagioclase separates contained ～ 6% pyroxenes and exhibited a typical plagioclase REE distribution. The REE abundances in the derivative equilibrium magmas from which SdM and Moore County (MC) plagioclases crystallized have been estimated from the plagioclase data and the plagioclase mineral/liquid partition coefficients. The REE distributions in possibly earlier parental magmas were calculated by assuming that various degrees of plagioclase and pigeonite (plagioclase/pigeonite = 1) fractional crystallization had been operative prior to the crystallization of SdM and MC. The calculated La/Sm and Sm/Yb ratios for the earlier magmas are essentially the same as the equilibrium magmas over a wide range (10–95%) of the assumed fractional crystallization. Considering the REE distributions and the Fe/Fe+Mg ratios, calculation shows that there is no simple genetic relationship between MC and SdM via fractional crystallization processes. A hypothesis for the derivation of these cumulate eucrites in the plutonic environment from residual diogenitic liquid, which was produced by the extensive partial melting of an eucritic source material followed by the crystallization of diogenite, also fails to account for the fractionated REE patterns calculated for the equilibrium and the possible parental magmas for either SdM or MC. Equilibrium non-modal partial melting calculations indicate that SdM and MC could be genetically related by a factor ～ 6 difference in the degrees of partial melting from a similar source material. However, this common source material which should contain > 30% high-Ca clinopyroxene and has a chondritic normalized La/Yb ～ 3, is different than that proposed for the non-cumulate eucrites.     

An experimental study on variation of <Emphasis Type="Italic">b</Emphasis> value during deformation of rock samples with different structural models

A preliminary study of b value of rocks with two kinds of structural models has been made on the base of a new acoustic emission recording system. It shows that b value of the sample decreases obviously when the sample with compressive en echelon faults changes into a tensile one after interchange occurs between stress axis σ ₁ and σ ₂. A similar experiment is observed when the sample with tensile en echelon faults changes into that with a bend fault after two segments of the en echelon fault linking up. These facts indicate that the variation of b value may contain the information of the regional dominant structural model. Therefore, b-value analyses could be a new method for studying regional dominant structural models.     

Climatological distribution of lightning density observed by satellites in China and its circumjacent regions

The 0.5°×0.5°grid resolution distribution of lightning density in China and its circumjacent regions have been analyzed by using the satellite-borne OTD (Apr 1995-Mar 2000) and LIS (Dec 1997-Mar 2003) databases. It is shown that: (i) Firstly, the variability of the lightning density (LD) is particularly pronounced over the different subareas, 9 times greater over the south than the north side of Himalayas Mountains, 2.5 times greater over the eastern than the western area of China. While the maximum and minimum LD are respectively 31.4fl/km2/a (in Guangzhou region) and less than 0.2fl/km2/a (in the desert of western China). Secondly, the LD of China's continent regularly varies with latitude and distance off coast, which is consistent with annual mean precipitation in varying trend. In conclusion, the Qinghai-Tibet Plateau, the China's three-step staircase topography and the latitude are three important factors affecting macro-scale characteristics of the LD distribution, (ii) The regional differences     

The crystal structure of (Fe<Subscript>4</Subscript>Cr<Subscript>4</Subscript>Ni)<Subscript>9</Subscript>C<Subscript>4</Subscript>

(Fe4Cr4Ni)9C4 is a metal carbide mineral formed by combination of Fe, Cr and Ni with C. It occurs in a chromite deposit in the Luobusha ophiolite, Tibet. Based on the determination of its crystal structure, the empirical formula is (Fe4.12Cr3.84Ni0.96)8.92C3.70 and the simplified formula is (Fe4Cr4Ni)4C9. The mineral is hexagonal with a = 1.38392(2) nm, c = 0.44690(9) nm, pace group P63 m c, Z=6 and the calculated specific gravity Dx = 7.089 g/cm3. Fe, Cr and Ni occupy different crystallographic sites and their coordination numbers are approximately 12, forming an alternate stacking sequence of flat and puckered layers along the c axis. Some metallic atoms have a defect structure. The interatomic distances of Fe, Cr and Ni are 0.2525-0.2666 nm, and the distances between Fe, Cr, Ni and C are 0.1893-0.2169 nm. The coordination number of carbon is 6. It occurs in interstices of the metallic atoms Fe, Cr and Ni to form trigonalprismatically coordinated polyhedra. These coordination polyhedra are linked with each other via shared corners or shared edges into a new type of metal carbide structure.     

应用塑性图对陕西特殊土的判别

塑性图是由卡萨格兰德（Ａ·Ｃａｓａｇｒａｎｄｅ）于１９４２年首次提出的，该图将阿太量（Ａ·Ａｅｔｅｒｂｅｒｇ）界限（液限、塑限）应用于土质分类．本文根据塑性图判别理论并应用塑性图，对陕西省特殊土（黄土、三趾马红土、膨胀土等）进行了判别，结果为黄土位于ＣＬＹ区，三趾马红土和膨胀土位于ＣＨＥ区，其效果较好，达到了分类的目的．     

面向Internet的农业气象产量动态预报

针对信息时代Internet网上用户对产量预报动态查询的需求 ,探讨了面向Inter net的农业气象产量预报的解决方案。试验结果表明 ,由于作物生长发育和产量形成是一个光、温、水、土条件长期、综合作用 ,生物量长期累积的过程 ,因此利用积分回归方法 ,考虑全生育期光、温、水气象因子的综合影响 ,根据已出现的天气实况 ,在假定后期天气条件正常的情况下 ,有可能预测出未来产量的趋势。随着天气实况的逐一出现 ,后期的预报结果可望逐步接近实际值。统计检验和试报结果误差均在允许范围内。     

Co-seismic ground deformation and source parameters of Mani M7.9 earthquake inferred from spaceborne D-InSAR observation data

In recent ten years, Differential Interferometric Synthetic Aperture Radar (D-InSAR) has become a major technique of space-based geodesy together with GPS, VLBI and SLR. Interferometric Synthetic Aper-ture Radar (InSAR) has many advantages, such as all-weather, all-time, strong stability and dynamic survey property, and no requirements for ground sta-tions. In particular, the surveying results by InSAR can cover a large range of the ground deformation field in succession and has gr…     

Geology and geochemistry of the Changba SEDEX Pb-Zn deposit,Qinling orogenic belt,China

The Changba Pb-Zn SEDEX deposit occurs in the Middle Devonian sequence of the Anjiaca Formation of the Western Qinling Hercynian Orogen in the Gansu Province, China. The Changba-II orebody is hosted in biotite quartz schist and is the largest of 143 stratiform orebodies that are hosted either in biotite quartz schist or marble. The Changba-II comprises two types of mineralization: a bedded facies and an underlying breccia lens. The bedded section exhibits three sulfide sub-facies zoned from bottom to top: 1) banded sphalerite intercalated with quartz albitite; 2) interbedded massive pyrite and sphalerite ore; and 3) banded sphalerite ore intercalated with banded baritite. Major metallic minerals are sphalerite, pyrite, galena, with minor arsenopyrite, pyrrhotite, boulangerite, and rare chalcopyrite. The bedded sulfides are underlain by a lens of brecciated and albitized biotite-quartz schists cemented by sulfides and tourmaline.Massive and bedded sulfide ³⁴S values range from 8.1 to 29.3, whereas barite ³⁴S values range from 20.8 to 31.5. Disseminated pyrite in footwall schists has ³⁴S values ranging from 8.1 to 10.6, and increase to values ranging from 11.1 to 14.7 in the hangingwall. The lower ³⁴S values for massive and bedded sulfides are interpreted to be derived from progressive bacterial sulfate reduction (BSR) of Devonian seawater in a sulfate-restricted sub-basin. The higher ³⁴S values for massive and bedded sulfides could be a product of quantitative BSR but this is incompatible with barite being more abundant above the bedded sulfides. Instead, it is more likely that thermochemical sulfate reduction of seawater sulfate or of evaporite was the source of heavy hydrothermal sulfur. Heavy hydrothermal sulfur was injected into a sulfate-restricted sub-basin where it mixed with low ³⁴S BSR sulfide to form the massive and bedded sulfides. The REE patterns of sulfide layers and associated quartz albitite and baritite are similar to those of the host biotite quartz schists, suggesting that the hydrothermal fluids leached REE from the underlying rocks. Pb isotope ratios in galena form an array between the Upper Crust and the Mantle reservoir curves, which indicates that the lead is derived from upper crustal rocks comprising mafic igneous units. The Sr⁸⁷/Sr⁸⁶ ratio of 0.7101 for carbonate within the sulfide layers also suggests that Sr is derived from the mixing of Sr leached from upper crustal rocks with Middle Devonian seawater Sr. A Rb-Sr isochron age of 389.4 ± 6.4 Ma for sulfide layers and the interbedded hydrothermal sediments is consistent with the age of host Mid-Devonian strata. Ar³⁹/Ar⁴⁰ plateau age at 352.8 ± 3.5 Ma and Ar³⁹-Ar⁴⁰ isochron age of 346.6 ± 6.4 Ma for albite in the quartz albitite intercalated with sulfide layers indicate either albite formation after the sulfides or thermal resetting of the Rb-Sr system at about 350 Ma, the age of collision between the North China and Yangtze cratons.Editorial handling: E. Frimmel     

曲线顶管技术及顶进力分析计算

曲线顶管施工技术以其特有的优势和应用领域,越来越受到重视。总结了国际上常用的曲线顶管施工技术,分别以SS MOLE和Ultimate Method两种具有代表性的工法为例介绍了曲线顶管技术的地层适应性、适用管道直径、应用领域和所能达到的最小曲率半径。对曲线顶管施工中顶进力计算这一重点和难点,给出了曲线顶管顶推力计算公式,并举例说明了曲线段顶推力计算公式的实际应用。